On 11/14/17 8:47 PM, Daniel Axtens wrote:
> Hi Bryant,
>
> This looks a bit better, but...
>
>> The following patch ensures that the bounce_buffer is not null
>> prior to using it within skb_copy_from_linear_data.
> How would this occur?
>
> Looking at ibmveth.c, I see bounce_buffer being freed in ibmveth_close()
> and allocated in ibmveth_open() only. If allocation fails, the whole
> opening of the device fails with -ENOMEM.
>
> It seems your test case - changing TSO - causes ibmveth_set_tso() to
> cause an adaptor restart - an ibmveth_close(dev) and then an
> ibmveth_open(dev). Is this happening in parallel with an out of memory
> condition - is the memory allocation failing?
>
> Alternatively, could it be the case that you're closing the device while
> packets are in flight, and then trying to use a bounce_buffer that's
> been freed elsewhere? Do you need to decouple memory freeing from
> ibmveth_close?
When checksum or largesend attribute for VEA is enabled, it triggers a
ibmveth_set_features->ibmveth_set_csum_offload or ibmveth_set_tso
Those two routines will do a ibmveth_close, which as you see unmaps and frees
the bounce buffer.
Like you said if there is data in transmit, it causes the system to crash due
to bounce_buffer being used when its already freed elsewhere.
This patch just closes the window, bad things can still happen. I wanted to leave it
up to the people who actively develop in ibmveth to close the window, since introducing
a lock can be expensive in tx.
>> The problem can be recreated toggling on/off Large send offload.
>>
>> The following script when run (along with some iperf traffic recreates the
>> crash within 5-10 mins or so).
>>
>> while true
>> do
>> ethtool -k ibmveth0 | grep tcp-segmentation-offload
>> ethtool -K ibmveth0 tso off
>> ethtool -k ibmveth0 | grep tcp-segmentation-offload
>> ethtool -K ibmveth0 tso on
>> done
>>
>> Note: This issue happens the very first time largsesend offload is
>> turned off too (but the above script recreates the issue all the times)
>>
>> [76563.914173] Unable to handle kernel paging request for data at address 0x00000000
>> [76563.914197] Faulting instruction address: 0xc000000000063940
>> [76563.914205] Oops: Kernel access of bad area, sig: 11 [#1]
>> [76563.914210] SMP NR_CPUS=2048 NUMA pSeries
>> [76563.914217] Modules linked in: rpadlpar_io rpaphp dccp_diag dccp tcp_diag udp_diag inet_diag unix_diag af_packet_diag netlink_diag nls_utf8 isofs binfmt_misc pseries_rng rtc_generic autofs4 ibmvfc scsi_transport_fc ibmvscsi ibmveth
>> [76563.914251] CPU: 3 PID: 0 Comm: swapper/3 Not tainted 4.4.0-34-generic #53-Ubuntu
> ^--- yikes!
>
> There are relevant changes to this area since 4.4:
> 2c42bf4b4317 ("ibmveth: check return of skb_linearize in ibmveth_start_xmit")
> 66aa0678efc2 ("ibmveth: Support to enable LSO/CSO for Trunk VEA.")
>
> Does this crash occurs on a more recent kernel?
We DKMS ibmveth, so we have the most recent stuff. Also I have a test 4.14 kernel
that still have this problem.
>
>> diff --git a/drivers/net/ethernet/ibm/ibmveth.c b/drivers/net/ethernet/ibm/ibmveth.c
>> index f210398200ece..1d29b1649118d 100644
>> --- a/drivers/net/ethernet/ibm/ibmveth.c
>> +++ b/drivers/net/ethernet/ibm/ibmveth.c
>> @@ -1092,8 +1092,14 @@ static netdev_tx_t ibmveth_start_xmit(struct sk_buff *skb,
>> */
>> if (force_bounce || (!skb_is_nonlinear(skb) &&
>> (skb->len < tx_copybreak))) {
>> - skb_copy_from_linear_data(skb, adapter->bounce_buffer,
>> - skb->len);
>> + if (adapter->bounce_buffer) {
>> + skb_copy_from_linear_data(skb, adapter->bounce_buffer,
>> + skb->len);
>> + } else {
>> + adapter->tx_send_failed++;
>> + netdev->stats.tx_dropped++;
>> + goto out;
> Finally, as I alluded to at the top of this message, isn't the
> disappearance of the bounce-buffer a pretty serious issue? As I
> understand it, it means your data structures are now inconsistent. Do
> you need to - at the least - be more chatty here?
>
> Regards,
> Daniel
Yes, we can be more chatty, but like I said previously the real solution is to make sure
if there is data in transmit to clear that up first before napi_disable in ibmveth_close.
-Bryant