This patch fixes an issue that this driver cannot go status stage
in control read when the req.zero is set to 1 and the len in
usb3_write_pipe() is set to 0. Otherwise, if we use g_ncm driver,
usb enumeration takes long time (5 seconds or more).
Fixes: 746bfe63bba3 ("usb: gadget: renesas_usb3: add support for Renesas USB3.0 peripheral controller")
Cc: <stable@xxxxxxxxxxxxxxx> # v4.5+
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@xxxxxxxxxxx>
---
drivers/usb/gadget/udc/renesas_usb3.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/drivers/usb/gadget/udc/renesas_usb3.c b/drivers/usb/gadget/udc/renesas_usb3.c
index 7e0c534..63a2061 100644
--- a/drivers/usb/gadget/udc/renesas_usb3.c
+++ b/drivers/usb/gadget/udc/renesas_usb3.c
@@ -1038,7 +1038,7 @@ static int usb3_write_pipe(struct renesas_usb3_ep *usb3_ep,
usb3_ep->ep.maxpacket);
u8 *buf = usb3_req->req.buf + usb3_req->req.actual;
u32 tmp = 0;
- bool is_last;
+ bool is_last = !len ? true : false;
if (usb3_wait_pipe_status(usb3_ep, PX_STA_BUFSTS) < 0)
return -EBUSY;
@@ -1059,7 +1059,8 @@ static int usb3_write_pipe(struct renesas_usb3_ep *usb3_ep,
usb3_write(usb3, tmp, fifo_reg);
}
- is_last = usb3_is_transfer_complete(usb3_ep, usb3_req);
+ if (!is_last)
+ is_last = usb3_is_transfer_complete(usb3_ep, usb3_req);
/* Send the data */
usb3_set_px_con_send(usb3_ep, len, is_last);
--
1.9.1