When bRequestType & USB_DIR_IN is false and req.length is 0 in control
transfer, since it means non-data, this driver should not set the mode
as control write. So, this patch fixes it.
Fixes: 746bfe63bba3 ("usb: gadget: renesas_usb3: add support for Renesas USB3.0 peripheral controller")
Cc: <stable@xxxxxxxxxxxxxxx> # v4.5+
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@xxxxxxxxxxx>
---
drivers/usb/gadget/udc/renesas_usb3.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/usb/gadget/udc/renesas_usb3.c b/drivers/usb/gadget/udc/renesas_usb3.c
index df37c1e..555c105 100644
--- a/drivers/usb/gadget/udc/renesas_usb3.c
+++ b/drivers/usb/gadget/udc/renesas_usb3.c
@@ -1150,7 +1150,8 @@ static void usb3_start_pipe0(struct renesas_usb3_ep *usb3_ep,
usb3_set_p0_con_for_ctrl_read_data(usb3);
} else {
usb3_clear_bit(usb3, P0_MOD_DIR, USB3_P0_MOD);
- usb3_set_p0_con_for_ctrl_write_data(usb3);
+ if (usb3_req->req.length)
+ usb3_set_p0_con_for_ctrl_write_data(usb3);
}
usb3_p0_xfer(usb3_ep, usb3_req);
--
1.9.1