When mapping the RX DMA buffers, the driver was accidentally specifying zero for the buffer length. Under normal circumstances, SWIOTLB does not need to allocate a bounce buffer, so the address is just mapped without checking the size field. This is why the error was not detected earlier. Fixes: b9b17debc69d ("net: emac: emac gigabit ethernet controller driver") Cc: stable@xxxxxxxxxxxxxxx Signed-off-by: Timur Tabi <timur@xxxxxxxxxxxxxx> --- drivers/net/ethernet/qualcomm/emac/emac-mac.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/net/ethernet/qualcomm/emac/emac-mac.c b/drivers/net/ethernet/qualcomm/emac/emac-mac.c index 0ea3ca09c689..3ed9033e56db 100644 --- a/drivers/net/ethernet/qualcomm/emac/emac-mac.c +++ b/drivers/net/ethernet/qualcomm/emac/emac-mac.c @@ -898,7 +898,8 @@ static void emac_mac_rx_descs_refill(struct emac_adapter *adpt, curr_rxbuf->dma_addr = dma_map_single(adpt->netdev->dev.parent, skb->data, - curr_rxbuf->length, DMA_FROM_DEVICE); + adpt->rxbuf_size, DMA_FROM_DEVICE); + ret = dma_mapping_error(adpt->netdev->dev.parent, curr_rxbuf->dma_addr); if (ret) { -- Qualcomm Datacenter Technologies, Inc. as an affiliate of Qualcomm Technologies, Inc. Qualcomm Technologies, Inc. is a member of the Code Aurora Forum, a Linux Foundation Collaborative Project.