The register offset for the lcd1-ch1 clock was incorrectly pointing to
the lcd0-ch1 clock. This resulted in the lcd0-ch1 clock being disabled
when the clk core disables unused clocks. This then stops the simplefb
HDMI output path.
Reported-by: Bob Ham <rah@xxxxxxxxxxxx>
Fixes: c6e6c96d8fa6 ("clk: sunxi-ng: Add A31/A31s clocks")
Cc: stable@xxxxxxxxxxxxxxx # 4.9.x-
Signed-off-by: Chen-Yu Tsai <wens@xxxxxxxx>
---
drivers/clk/sunxi-ng/ccu-sun6i-a31.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/clk/sunxi-ng/ccu-sun6i-a31.c b/drivers/clk/sunxi-ng/ccu-sun6i-a31.c
index 89e68d29bf45..df97e25aec76 100644
--- a/drivers/clk/sunxi-ng/ccu-sun6i-a31.c
+++ b/drivers/clk/sunxi-ng/ccu-sun6i-a31.c
@@ -556,7 +556,7 @@ static SUNXI_CCU_M_WITH_MUX_GATE(lcd0_ch1_clk, "lcd0-ch1", lcd_ch1_parents,
0x12c, 0, 4, 24, 3, BIT(31),
CLK_SET_RATE_PARENT);
static SUNXI_CCU_M_WITH_MUX_GATE(lcd1_ch1_clk, "lcd1-ch1", lcd_ch1_parents,
- 0x12c, 0, 4, 24, 3, BIT(31),
+ 0x130, 0, 4, 24, 3, BIT(31),
CLK_SET_RATE_PARENT);
static const char * const csi_sclk_parents[] = { "pll-video0", "pll-video1",
--
2.11.0