Re: Patch "amd-xgbe: Prepare for working with more than one type of phy" has been added to the 4.9-stable tree

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 4/10/2017 11:06 AM, gregkh@xxxxxxxxxxxxxxxxxxx wrote:

This is a note to let you know that I've just added the patch titled

    amd-xgbe: Prepare for working with more than one type of phy

to the 4.9-stable tree which can be found at:
    http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary

The filename of the patch is:
     amd-xgbe-prepare-for-working-with-more-than-one-type-of-phy.patch
and it can be found in the queue-4.9 subdirectory.

If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@xxxxxxxxxxxxxxx> know about it.

Hi Greg,

I'm not sure why this is scheduled for stable...  The support for
multiple phys was not added until 4.10 and so is not needed before
that.

I missed the emails about the jumbo MTU processing patch for this driver
("amd-xgbe: Fix jumbo MTU processing on newer hardware") going back to
4.4-stable and 4.9-stable.  That patch is only needed for newer hardware
which is supported only in 4.10 and later.  If that is cause for pulling
this patch in, then it is best to revert the MTU patch rather than add
this one.

Thanks,
Tom



From foo@baz Mon Apr 10 17:43:56 CEST 2017
From: alexander.levin@xxxxxxxxxxx
Date: Tue, 4 Apr 2017 19:32:23 +0000
Subject: amd-xgbe: Prepare for working with more than one type of phy
To: "gregkh@xxxxxxxxxxxxxxxxxxx" <gregkh@xxxxxxxxxxxxxxxxxxx>
Cc: "stable@xxxxxxxxxxxxxxx" <stable@xxxxxxxxxxxxxxx>
Message-ID: <20170404193158.19041-57-alexander.levin@xxxxxxxxxxx>

From: "Lendacky, Thomas" <Thomas.Lendacky@xxxxxxx>

[ Upstream commit e57f7a3feaef0e9e196801f1625bca1337405421 ]

Prepare the code to be able to work with more than one type of phy by
adding additional callable functions into the phy interface and removing
phy specific settings/functions from non-phy related files.

Signed-off-by: Tom Lendacky <thomas.lendacky@xxxxxxx>
Signed-off-by: David S. Miller <davem@xxxxxxxxxxxxx>
Signed-off-by: Sasha Levin <alexander.levin@xxxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
 drivers/net/ethernet/amd/xgbe/Makefile       |    3
 drivers/net/ethernet/amd/xgbe/xgbe-dev.c     |   58 -
 drivers/net/ethernet/amd/xgbe/xgbe-drv.c     |    6
 drivers/net/ethernet/amd/xgbe/xgbe-ethtool.c |   19
 drivers/net/ethernet/amd/xgbe/xgbe-main.c    |  214 ++-----
 drivers/net/ethernet/amd/xgbe/xgbe-mdio.c    |  543 +++++------------
 drivers/net/ethernet/amd/xgbe/xgbe-phy-v1.c  |  821 +++++++++++++++++++++++++++
 drivers/net/ethernet/amd/xgbe/xgbe.h         |  130 ++--
 8 files changed, 1137 insertions(+), 657 deletions(-)
 create mode 100644 drivers/net/ethernet/amd/xgbe/xgbe-phy-v1.c

--- a/drivers/net/ethernet/amd/xgbe/Makefile
+++ b/drivers/net/ethernet/amd/xgbe/Makefile
@@ -2,7 +2,8 @@ obj-$(CONFIG_AMD_XGBE) += amd-xgbe.o

 amd-xgbe-objs := xgbe-main.o xgbe-drv.o xgbe-dev.o \
 		 xgbe-desc.o xgbe-ethtool.o xgbe-mdio.o \
-		 xgbe-ptp.o
+		 xgbe-ptp.o \
+		 xgbe-phy-v1.o

 amd-xgbe-$(CONFIG_AMD_XGBE_DCB) += xgbe-dcb.o
 amd-xgbe-$(CONFIG_DEBUG_FS) += xgbe-debugfs.o
--- a/drivers/net/ethernet/amd/xgbe/xgbe-dev.c
+++ b/drivers/net/ethernet/amd/xgbe/xgbe-dev.c
@@ -704,32 +704,26 @@ static void xgbe_enable_mac_interrupts(s
 	XGMAC_IOWRITE_BITS(pdata, MMC_TIER, ALL_INTERRUPTS, 0xffffffff);
 }

-static int xgbe_set_gmii_speed(struct xgbe_prv_data *pdata)
+static int xgbe_set_speed(struct xgbe_prv_data *pdata, int speed)
 {
-	if (XGMAC_IOREAD_BITS(pdata, MAC_TCR, SS) == 0x3)
-		return 0;
-
-	XGMAC_IOWRITE_BITS(pdata, MAC_TCR, SS, 0x3);
-
-	return 0;
-}
-
-static int xgbe_set_gmii_2500_speed(struct xgbe_prv_data *pdata)
-{
-	if (XGMAC_IOREAD_BITS(pdata, MAC_TCR, SS) == 0x2)
-		return 0;
+	unsigned int ss;

-	XGMAC_IOWRITE_BITS(pdata, MAC_TCR, SS, 0x2);
-
-	return 0;
-}
-
-static int xgbe_set_xgmii_speed(struct xgbe_prv_data *pdata)
-{
-	if (XGMAC_IOREAD_BITS(pdata, MAC_TCR, SS) == 0)
-		return 0;
+	switch (speed) {
+	case SPEED_1000:
+		ss = 0x03;
+		break;
+	case SPEED_2500:
+		ss = 0x02;
+		break;
+	case SPEED_10000:
+		ss = 0x00;
+		break;
+	default:
+		return -EINVAL;
+	}

-	XGMAC_IOWRITE_BITS(pdata, MAC_TCR, SS, 0);
+	if (XGMAC_IOREAD_BITS(pdata, MAC_TCR, SS) != ss)
+		XGMAC_IOWRITE_BITS(pdata, MAC_TCR, SS, ss);

 	return 0;
 }
@@ -2177,19 +2171,7 @@ static void xgbe_config_jumbo_enable(str

 static void xgbe_config_mac_speed(struct xgbe_prv_data *pdata)
 {
-	switch (pdata->phy_speed) {
-	case SPEED_10000:
-		xgbe_set_xgmii_speed(pdata);
-		break;
-
-	case SPEED_2500:
-		xgbe_set_gmii_2500_speed(pdata);
-		break;
-
-	case SPEED_1000:
-		xgbe_set_gmii_speed(pdata);
-		break;
-	}
+	xgbe_set_speed(pdata, pdata->phy_speed);
 }

 static void xgbe_config_checksum_offload(struct xgbe_prv_data *pdata)
@@ -2905,9 +2887,7 @@ void xgbe_init_function_ptrs_dev(struct
 	hw_if->read_mmd_regs = xgbe_read_mmd_regs;
 	hw_if->write_mmd_regs = xgbe_write_mmd_regs;

-	hw_if->set_gmii_speed = xgbe_set_gmii_speed;
-	hw_if->set_gmii_2500_speed = xgbe_set_gmii_2500_speed;
-	hw_if->set_xgmii_speed = xgbe_set_xgmii_speed;
+	hw_if->set_speed = xgbe_set_speed;

 	hw_if->enable_tx = xgbe_enable_tx;
 	hw_if->disable_tx = xgbe_disable_tx;
--- a/drivers/net/ethernet/amd/xgbe/xgbe-drv.c
+++ b/drivers/net/ethernet/amd/xgbe/xgbe-drv.c
@@ -783,7 +783,7 @@ static void xgbe_free_rx_data(struct xgb
 	DBGPR("<--xgbe_free_rx_data\n");
 }

-static int xgbe_phy_init(struct xgbe_prv_data *pdata)
+static int xgbe_phy_reset(struct xgbe_prv_data *pdata)
 {
 	pdata->phy_link = -1;
 	pdata->phy_speed = SPEED_UNKNOWN;
@@ -1297,8 +1297,8 @@ static int xgbe_open(struct net_device *

 	DBGPR("-->xgbe_open\n");

-	/* Initialize the phy */
-	ret = xgbe_phy_init(pdata);
+	/* Reset the phy settings */
+	ret = xgbe_phy_reset(pdata);
 	if (ret)
 		return ret;

--- a/drivers/net/ethernet/amd/xgbe/xgbe-ethtool.c
+++ b/drivers/net/ethernet/amd/xgbe/xgbe-ethtool.c
@@ -316,24 +316,7 @@ static int xgbe_set_settings(struct net_
 	}

 	if (cmd->autoneg == AUTONEG_DISABLE) {
-		switch (speed) {
-		case SPEED_10000:
-			break;
-		case SPEED_2500:
-			if (pdata->speed_set != XGBE_SPEEDSET_2500_10000) {
-				netdev_err(netdev, "unsupported speed %u\n",
-					   speed);
-				return -EINVAL;
-			}
-			break;
-		case SPEED_1000:
-			if (pdata->speed_set != XGBE_SPEEDSET_1000_10000) {
-				netdev_err(netdev, "unsupported speed %u\n",
-					   speed);
-				return -EINVAL;
-			}
-			break;
-		default:
+		if (!pdata->phy_if.phy_valid_speed(pdata, speed)) {
 			netdev_err(netdev, "unsupported speed %u\n", speed);
 			return -EINVAL;
 		}
--- a/drivers/net/ethernet/amd/xgbe/xgbe-main.c
+++ b/drivers/net/ethernet/amd/xgbe/xgbe-main.c
@@ -125,6 +125,7 @@
 #include <linux/of_net.h>
 #include <linux/of_address.h>
 #include <linux/of_platform.h>
+#include <linux/of_device.h>
 #include <linux/clk.h>
 #include <linux/property.h>
 #include <linux/acpi.h>
@@ -145,42 +146,6 @@ MODULE_PARM_DESC(debug, " Network interf
 static const u32 default_msg_level = (NETIF_MSG_LINK | NETIF_MSG_IFDOWN |
 				      NETIF_MSG_IFUP);

-static const u32 xgbe_serdes_blwc[] = {
-	XGBE_SPEED_1000_BLWC,
-	XGBE_SPEED_2500_BLWC,
-	XGBE_SPEED_10000_BLWC,
-};
-
-static const u32 xgbe_serdes_cdr_rate[] = {
-	XGBE_SPEED_1000_CDR,
-	XGBE_SPEED_2500_CDR,
-	XGBE_SPEED_10000_CDR,
-};
-
-static const u32 xgbe_serdes_pq_skew[] = {
-	XGBE_SPEED_1000_PQ,
-	XGBE_SPEED_2500_PQ,
-	XGBE_SPEED_10000_PQ,
-};
-
-static const u32 xgbe_serdes_tx_amp[] = {
-	XGBE_SPEED_1000_TXAMP,
-	XGBE_SPEED_2500_TXAMP,
-	XGBE_SPEED_10000_TXAMP,
-};
-
-static const u32 xgbe_serdes_dfe_tap_cfg[] = {
-	XGBE_SPEED_1000_DFE_TAP_CONFIG,
-	XGBE_SPEED_2500_DFE_TAP_CONFIG,
-	XGBE_SPEED_10000_DFE_TAP_CONFIG,
-};
-
-static const u32 xgbe_serdes_dfe_tap_ena[] = {
-	XGBE_SPEED_1000_DFE_TAP_ENABLE,
-	XGBE_SPEED_2500_DFE_TAP_ENABLE,
-	XGBE_SPEED_10000_DFE_TAP_ENABLE,
-};
-
 static void xgbe_default_config(struct xgbe_prv_data *pdata)
 {
 	DBGPR("-->xgbe_default_config\n");
@@ -207,9 +172,22 @@ static void xgbe_init_all_fptrs(struct x
 	xgbe_init_function_ptrs_dev(&pdata->hw_if);
 	xgbe_init_function_ptrs_phy(&pdata->phy_if);
 	xgbe_init_function_ptrs_desc(&pdata->desc_if);
+
+	pdata->vdata->init_function_ptrs_phy_impl(&pdata->phy_if);
 }

 #ifdef CONFIG_ACPI
+static const struct acpi_device_id xgbe_acpi_match[];
+
+static struct xgbe_version_data *xgbe_acpi_vdata(struct xgbe_prv_data *pdata)
+{
+	const struct acpi_device_id *id;
+
+	id = acpi_match_device(xgbe_acpi_match, pdata->dev);
+
+	return id ? (struct xgbe_version_data *)id->driver_data : NULL;
+}
+
 static int xgbe_acpi_support(struct xgbe_prv_data *pdata)
 {
 	struct device *dev = pdata->dev;
@@ -237,6 +215,11 @@ static int xgbe_acpi_support(struct xgbe
 	return 0;
 }
 #else   /* CONFIG_ACPI */
+static struct xgbe_version_data *xgbe_acpi_vdata(struct xgbe_prv_data *pdata)
+{
+	return NULL;
+}
+
 static int xgbe_acpi_support(struct xgbe_prv_data *pdata)
 {
 	return -EINVAL;
@@ -244,6 +227,17 @@ static int xgbe_acpi_support(struct xgbe
 #endif  /* CONFIG_ACPI */

 #ifdef CONFIG_OF
+static const struct of_device_id xgbe_of_match[];
+
+static struct xgbe_version_data *xgbe_of_vdata(struct xgbe_prv_data *pdata)
+{
+	const struct of_device_id *id;
+
+	id = of_match_device(xgbe_of_match, pdata->dev);
+
+	return id ? (struct xgbe_version_data *)id->data : NULL;
+}
+
 static int xgbe_of_support(struct xgbe_prv_data *pdata)
 {
 	struct device *dev = pdata->dev;
@@ -292,6 +286,11 @@ static struct platform_device *xgbe_of_g
 	return phy_pdev;
 }
 #else   /* CONFIG_OF */
+static struct xgbe_version_data *xgbe_of_vdata(struct xgbe_prv_data *pdata)
+{
+	return NULL;
+}
+
 static int xgbe_of_support(struct xgbe_prv_data *pdata)
 {
 	return -EINVAL;
@@ -333,11 +332,17 @@ static struct platform_device *xgbe_get_
 	return phy_pdev;
 }

+static struct xgbe_version_data *xgbe_get_vdata(struct xgbe_prv_data *pdata)
+{
+	return pdata->use_acpi ? xgbe_acpi_vdata(pdata)
+			       : xgbe_of_vdata(pdata);
+}
+
 static int xgbe_probe(struct platform_device *pdev)
 {
 	struct xgbe_prv_data *pdata;
 	struct net_device *netdev;
-	struct device *dev = &pdev->dev, *phy_dev;
+	struct device *dev = &pdev->dev;
 	struct platform_device *phy_pdev;
 	struct resource *res;
 	const char *phy_mode;
@@ -374,13 +379,17 @@ static int xgbe_probe(struct platform_de
 	/* Check if we should use ACPI or DT */
 	pdata->use_acpi = dev->of_node ? 0 : 1;

+	/* Get the version data */
+	pdata->vdata = xgbe_get_vdata(pdata);
+
 	phy_pdev = xgbe_get_phy_pdev(pdata);
 	if (!phy_pdev) {
 		dev_err(dev, "unable to obtain phy device\n");
 		ret = -EINVAL;
 		goto err_phydev;
 	}
-	phy_dev = &phy_pdev->dev;
+	pdata->phy_pdev = phy_pdev;
+	pdata->phy_dev = &phy_pdev->dev;

 	if (pdev == phy_pdev) {
 		/* New style device tree or ACPI:
@@ -492,115 +501,6 @@ static int xgbe_probe(struct platform_de
 	if (device_property_present(dev, XGBE_DMA_IRQS_PROPERTY))
 		pdata->per_channel_irq = 1;

-	/* Retrieve the PHY speedset */
-	ret = device_property_read_u32(phy_dev, XGBE_SPEEDSET_PROPERTY,
-				       &pdata->speed_set);
-	if (ret) {
-		dev_err(dev, "invalid %s property\n", XGBE_SPEEDSET_PROPERTY);
-		goto err_io;
-	}
-
-	switch (pdata->speed_set) {
-	case XGBE_SPEEDSET_1000_10000:
-	case XGBE_SPEEDSET_2500_10000:
-		break;
-	default:
-		dev_err(dev, "invalid %s property\n", XGBE_SPEEDSET_PROPERTY);
-		ret = -EINVAL;
-		goto err_io;
-	}
-
-	/* Retrieve the PHY configuration properties */
-	if (device_property_present(phy_dev, XGBE_BLWC_PROPERTY)) {
-		ret = device_property_read_u32_array(phy_dev,
-						     XGBE_BLWC_PROPERTY,
-						     pdata->serdes_blwc,
-						     XGBE_SPEEDS);
-		if (ret) {
-			dev_err(dev, "invalid %s property\n",
-				XGBE_BLWC_PROPERTY);
-			goto err_io;
-		}
-	} else {
-		memcpy(pdata->serdes_blwc, xgbe_serdes_blwc,
-		       sizeof(pdata->serdes_blwc));
-	}
-
-	if (device_property_present(phy_dev, XGBE_CDR_RATE_PROPERTY)) {
-		ret = device_property_read_u32_array(phy_dev,
-						     XGBE_CDR_RATE_PROPERTY,
-						     pdata->serdes_cdr_rate,
-						     XGBE_SPEEDS);
-		if (ret) {
-			dev_err(dev, "invalid %s property\n",
-				XGBE_CDR_RATE_PROPERTY);
-			goto err_io;
-		}
-	} else {
-		memcpy(pdata->serdes_cdr_rate, xgbe_serdes_cdr_rate,
-		       sizeof(pdata->serdes_cdr_rate));
-	}
-
-	if (device_property_present(phy_dev, XGBE_PQ_SKEW_PROPERTY)) {
-		ret = device_property_read_u32_array(phy_dev,
-						     XGBE_PQ_SKEW_PROPERTY,
-						     pdata->serdes_pq_skew,
-						     XGBE_SPEEDS);
-		if (ret) {
-			dev_err(dev, "invalid %s property\n",
-				XGBE_PQ_SKEW_PROPERTY);
-			goto err_io;
-		}
-	} else {
-		memcpy(pdata->serdes_pq_skew, xgbe_serdes_pq_skew,
-		       sizeof(pdata->serdes_pq_skew));
-	}
-
-	if (device_property_present(phy_dev, XGBE_TX_AMP_PROPERTY)) {
-		ret = device_property_read_u32_array(phy_dev,
-						     XGBE_TX_AMP_PROPERTY,
-						     pdata->serdes_tx_amp,
-						     XGBE_SPEEDS);
-		if (ret) {
-			dev_err(dev, "invalid %s property\n",
-				XGBE_TX_AMP_PROPERTY);
-			goto err_io;
-		}
-	} else {
-		memcpy(pdata->serdes_tx_amp, xgbe_serdes_tx_amp,
-		       sizeof(pdata->serdes_tx_amp));
-	}
-
-	if (device_property_present(phy_dev, XGBE_DFE_CFG_PROPERTY)) {
-		ret = device_property_read_u32_array(phy_dev,
-						     XGBE_DFE_CFG_PROPERTY,
-						     pdata->serdes_dfe_tap_cfg,
-						     XGBE_SPEEDS);
-		if (ret) {
-			dev_err(dev, "invalid %s property\n",
-				XGBE_DFE_CFG_PROPERTY);
-			goto err_io;
-		}
-	} else {
-		memcpy(pdata->serdes_dfe_tap_cfg, xgbe_serdes_dfe_tap_cfg,
-		       sizeof(pdata->serdes_dfe_tap_cfg));
-	}
-
-	if (device_property_present(phy_dev, XGBE_DFE_ENA_PROPERTY)) {
-		ret = device_property_read_u32_array(phy_dev,
-						     XGBE_DFE_ENA_PROPERTY,
-						     pdata->serdes_dfe_tap_ena,
-						     XGBE_SPEEDS);
-		if (ret) {
-			dev_err(dev, "invalid %s property\n",
-				XGBE_DFE_ENA_PROPERTY);
-			goto err_io;
-		}
-	} else {
-		memcpy(pdata->serdes_dfe_tap_ena, xgbe_serdes_dfe_tap_ena,
-		       sizeof(pdata->serdes_dfe_tap_ena));
-	}
-
 	/* Obtain device settings unique to ACPI/OF */
 	if (pdata->use_acpi)
 		ret = xgbe_acpi_support(pdata);
@@ -704,7 +604,9 @@ static int xgbe_probe(struct platform_de
 	XGMAC_SET_BITS(pdata->rss_options, MAC_RSSCR, UDP4TE, 1);

 	/* Call MDIO/PHY initialization routine */
-	pdata->phy_if.phy_init(pdata);
+	ret = pdata->phy_if.phy_init(pdata);
+	if (ret)
+		goto err_io;

 	/* Set device operations */
 	netdev->netdev_ops = xgbe_get_netdev_ops();
@@ -777,8 +679,6 @@ static int xgbe_probe(struct platform_de

 	xgbe_debugfs_init(pdata);

-	platform_device_put(phy_pdev);
-
 	netdev_notice(netdev, "net device enabled\n");

 	DBGPR("<-- xgbe_probe\n");
@@ -814,6 +714,8 @@ static int xgbe_remove(struct platform_d

 	xgbe_ptp_unregister(pdata);

+	pdata->phy_if.phy_exit(pdata);
+
 	flush_workqueue(pdata->an_workqueue);
 	destroy_workqueue(pdata->an_workqueue);

@@ -822,6 +724,8 @@ static int xgbe_remove(struct platform_d

 	unregister_netdev(netdev);

+	platform_device_put(pdata->phy_pdev);
+
 	free_netdev(netdev);

 	DBGPR("<--xgbe_remove\n");
@@ -876,9 +780,14 @@ static int xgbe_resume(struct device *de
 }
 #endif /* CONFIG_PM_SLEEP */

+static const struct xgbe_version_data xgbe_v1 = {
+	.init_function_ptrs_phy_impl	= xgbe_init_function_ptrs_phy_v1,
+};
+
 #ifdef CONFIG_ACPI
 static const struct acpi_device_id xgbe_acpi_match[] = {
-	{ "AMDI8001", 0 },
+	{ .id = "AMDI8001",
+	  .driver_data = (kernel_ulong_t)&xgbe_v1 },
 	{},
 };

@@ -887,7 +796,8 @@ MODULE_DEVICE_TABLE(acpi, xgbe_acpi_matc

 #ifdef CONFIG_OF
 static const struct of_device_id xgbe_of_match[] = {
-	{ .compatible = "amd,xgbe-seattle-v1a", },
+	{ .compatible = "amd,xgbe-seattle-v1a",
+	  .data = &xgbe_v1 },
 	{},
 };

--- a/drivers/net/ethernet/amd/xgbe/xgbe-mdio.c
+++ b/drivers/net/ethernet/amd/xgbe/xgbe-mdio.c
@@ -145,280 +145,91 @@ static void xgbe_an_disable_kr_training(
 	XMDIO_WRITE(pdata, MDIO_MMD_PMAPMD, MDIO_PMA_10GBR_PMD_CTRL, reg);
 }

-static void xgbe_pcs_power_cycle(struct xgbe_prv_data *pdata)
+static void xgbe_kr_mode(struct xgbe_prv_data *pdata)
 {
-	unsigned int reg;
-
-	reg = XMDIO_READ(pdata, MDIO_MMD_PCS, MDIO_CTRL1);
-
-	reg |= MDIO_CTRL1_LPOWER;
-	XMDIO_WRITE(pdata, MDIO_MMD_PCS, MDIO_CTRL1, reg);
-
-	usleep_range(75, 100);
-
-	reg &= ~MDIO_CTRL1_LPOWER;
-	XMDIO_WRITE(pdata, MDIO_MMD_PCS, MDIO_CTRL1, reg);
-}
-
-static void xgbe_serdes_start_ratechange(struct xgbe_prv_data *pdata)
-{
-	/* Assert Rx and Tx ratechange */
-	XSIR1_IOWRITE_BITS(pdata, SIR1_SPEED, RATECHANGE, 1);
-}
-
-static void xgbe_serdes_complete_ratechange(struct xgbe_prv_data *pdata)
-{
-	unsigned int wait;
-	u16 status;
-
-	/* Release Rx and Tx ratechange */
-	XSIR1_IOWRITE_BITS(pdata, SIR1_SPEED, RATECHANGE, 0);
-
-	/* Wait for Rx and Tx ready */
-	wait = XGBE_RATECHANGE_COUNT;
-	while (wait--) {
-		usleep_range(50, 75);
-
-		status = XSIR0_IOREAD(pdata, SIR0_STATUS);
-		if (XSIR_GET_BITS(status, SIR0_STATUS, RX_READY) &&
-		    XSIR_GET_BITS(status, SIR0_STATUS, TX_READY))
-			goto rx_reset;
-	}
-
-	netif_dbg(pdata, link, pdata->netdev, "SerDes rx/tx not ready (%#hx)\n",
-		  status);
-
-rx_reset:
-	/* Perform Rx reset for the DFE changes */
-	XRXTX_IOWRITE_BITS(pdata, RXTX_REG6, RESETB_RXD, 0);
-	XRXTX_IOWRITE_BITS(pdata, RXTX_REG6, RESETB_RXD, 1);
-}
-
-static void xgbe_xgmii_mode(struct xgbe_prv_data *pdata)
-{
-	unsigned int reg;
-
 	/* Enable KR training */
 	xgbe_an_enable_kr_training(pdata);

 	/* Set MAC to 10G speed */
-	pdata->hw_if.set_xgmii_speed(pdata);
-
-	/* Set PCS to KR/10G speed */
-	reg = XMDIO_READ(pdata, MDIO_MMD_PCS, MDIO_CTRL2);
-	reg &= ~MDIO_PCS_CTRL2_TYPE;
-	reg |= MDIO_PCS_CTRL2_10GBR;
-	XMDIO_WRITE(pdata, MDIO_MMD_PCS, MDIO_CTRL2, reg);
-
-	reg = XMDIO_READ(pdata, MDIO_MMD_PCS, MDIO_CTRL1);
-	reg &= ~MDIO_CTRL1_SPEEDSEL;
-	reg |= MDIO_CTRL1_SPEED10G;
-	XMDIO_WRITE(pdata, MDIO_MMD_PCS, MDIO_CTRL1, reg);
-
-	xgbe_pcs_power_cycle(pdata);
-
-	/* Set SerDes to 10G speed */
-	xgbe_serdes_start_ratechange(pdata);
-
-	XSIR1_IOWRITE_BITS(pdata, SIR1_SPEED, DATARATE, XGBE_SPEED_10000_RATE);
-	XSIR1_IOWRITE_BITS(pdata, SIR1_SPEED, WORDMODE, XGBE_SPEED_10000_WORD);
-	XSIR1_IOWRITE_BITS(pdata, SIR1_SPEED, PLLSEL, XGBE_SPEED_10000_PLL);
-
-	XSIR1_IOWRITE_BITS(pdata, SIR1_SPEED, CDR_RATE,
-			   pdata->serdes_cdr_rate[XGBE_SPEED_10000]);
-	XSIR1_IOWRITE_BITS(pdata, SIR1_SPEED, TXAMP,
-			   pdata->serdes_tx_amp[XGBE_SPEED_10000]);
-	XRXTX_IOWRITE_BITS(pdata, RXTX_REG20, BLWC_ENA,
-			   pdata->serdes_blwc[XGBE_SPEED_10000]);
-	XRXTX_IOWRITE_BITS(pdata, RXTX_REG114, PQ_REG,
-			   pdata->serdes_pq_skew[XGBE_SPEED_10000]);
-	XRXTX_IOWRITE_BITS(pdata, RXTX_REG129, RXDFE_CONFIG,
-			   pdata->serdes_dfe_tap_cfg[XGBE_SPEED_10000]);
-	XRXTX_IOWRITE(pdata, RXTX_REG22,
-		      pdata->serdes_dfe_tap_ena[XGBE_SPEED_10000]);
-
-	xgbe_serdes_complete_ratechange(pdata);
+	pdata->hw_if.set_speed(pdata, SPEED_10000);

-	netif_dbg(pdata, link, pdata->netdev, "10GbE KR mode set\n");
+	/* Call PHY implementation support to complete rate change */
+	pdata->phy_if.phy_impl.set_mode(pdata, XGBE_MODE_KR);
 }

-static void xgbe_gmii_2500_mode(struct xgbe_prv_data *pdata)
+static void xgbe_kx_2500_mode(struct xgbe_prv_data *pdata)
 {
-	unsigned int reg;
-
 	/* Disable KR training */
 	xgbe_an_disable_kr_training(pdata);

 	/* Set MAC to 2.5G speed */
-	pdata->hw_if.set_gmii_2500_speed(pdata);
-
-	/* Set PCS to KX/1G speed */
-	reg = XMDIO_READ(pdata, MDIO_MMD_PCS, MDIO_CTRL2);
-	reg &= ~MDIO_PCS_CTRL2_TYPE;
-	reg |= MDIO_PCS_CTRL2_10GBX;
-	XMDIO_WRITE(pdata, MDIO_MMD_PCS, MDIO_CTRL2, reg);
-
-	reg = XMDIO_READ(pdata, MDIO_MMD_PCS, MDIO_CTRL1);
-	reg &= ~MDIO_CTRL1_SPEEDSEL;
-	reg |= MDIO_CTRL1_SPEED1G;
-	XMDIO_WRITE(pdata, MDIO_MMD_PCS, MDIO_CTRL1, reg);
-
-	xgbe_pcs_power_cycle(pdata);
-
-	/* Set SerDes to 2.5G speed */
-	xgbe_serdes_start_ratechange(pdata);
-
-	XSIR1_IOWRITE_BITS(pdata, SIR1_SPEED, DATARATE, XGBE_SPEED_2500_RATE);
-	XSIR1_IOWRITE_BITS(pdata, SIR1_SPEED, WORDMODE, XGBE_SPEED_2500_WORD);
-	XSIR1_IOWRITE_BITS(pdata, SIR1_SPEED, PLLSEL, XGBE_SPEED_2500_PLL);
-
-	XSIR1_IOWRITE_BITS(pdata, SIR1_SPEED, CDR_RATE,
-			   pdata->serdes_cdr_rate[XGBE_SPEED_2500]);
-	XSIR1_IOWRITE_BITS(pdata, SIR1_SPEED, TXAMP,
-			   pdata->serdes_tx_amp[XGBE_SPEED_2500]);
-	XRXTX_IOWRITE_BITS(pdata, RXTX_REG20, BLWC_ENA,
-			   pdata->serdes_blwc[XGBE_SPEED_2500]);
-	XRXTX_IOWRITE_BITS(pdata, RXTX_REG114, PQ_REG,
-			   pdata->serdes_pq_skew[XGBE_SPEED_2500]);
-	XRXTX_IOWRITE_BITS(pdata, RXTX_REG129, RXDFE_CONFIG,
-			   pdata->serdes_dfe_tap_cfg[XGBE_SPEED_2500]);
-	XRXTX_IOWRITE(pdata, RXTX_REG22,
-		      pdata->serdes_dfe_tap_ena[XGBE_SPEED_2500]);
-
-	xgbe_serdes_complete_ratechange(pdata);
+	pdata->hw_if.set_speed(pdata, SPEED_2500);

-	netif_dbg(pdata, link, pdata->netdev, "2.5GbE KX mode set\n");
+	/* Call PHY implementation support to complete rate change */
+	pdata->phy_if.phy_impl.set_mode(pdata, XGBE_MODE_KX_2500);
 }

-static void xgbe_gmii_mode(struct xgbe_prv_data *pdata)
+static void xgbe_kx_1000_mode(struct xgbe_prv_data *pdata)
 {
-	unsigned int reg;
-
 	/* Disable KR training */
 	xgbe_an_disable_kr_training(pdata);

 	/* Set MAC to 1G speed */
-	pdata->hw_if.set_gmii_speed(pdata);
-
-	/* Set PCS to KX/1G speed */
-	reg = XMDIO_READ(pdata, MDIO_MMD_PCS, MDIO_CTRL2);
-	reg &= ~MDIO_PCS_CTRL2_TYPE;
-	reg |= MDIO_PCS_CTRL2_10GBX;
-	XMDIO_WRITE(pdata, MDIO_MMD_PCS, MDIO_CTRL2, reg);
-
-	reg = XMDIO_READ(pdata, MDIO_MMD_PCS, MDIO_CTRL1);
-	reg &= ~MDIO_CTRL1_SPEEDSEL;
-	reg |= MDIO_CTRL1_SPEED1G;
-	XMDIO_WRITE(pdata, MDIO_MMD_PCS, MDIO_CTRL1, reg);
-
-	xgbe_pcs_power_cycle(pdata);
-
-	/* Set SerDes to 1G speed */
-	xgbe_serdes_start_ratechange(pdata);
-
-	XSIR1_IOWRITE_BITS(pdata, SIR1_SPEED, DATARATE, XGBE_SPEED_1000_RATE);
-	XSIR1_IOWRITE_BITS(pdata, SIR1_SPEED, WORDMODE, XGBE_SPEED_1000_WORD);
-	XSIR1_IOWRITE_BITS(pdata, SIR1_SPEED, PLLSEL, XGBE_SPEED_1000_PLL);
-
-	XSIR1_IOWRITE_BITS(pdata, SIR1_SPEED, CDR_RATE,
-			   pdata->serdes_cdr_rate[XGBE_SPEED_1000]);
-	XSIR1_IOWRITE_BITS(pdata, SIR1_SPEED, TXAMP,
-			   pdata->serdes_tx_amp[XGBE_SPEED_1000]);
-	XRXTX_IOWRITE_BITS(pdata, RXTX_REG20, BLWC_ENA,
-			   pdata->serdes_blwc[XGBE_SPEED_1000]);
-	XRXTX_IOWRITE_BITS(pdata, RXTX_REG114, PQ_REG,
-			   pdata->serdes_pq_skew[XGBE_SPEED_1000]);
-	XRXTX_IOWRITE_BITS(pdata, RXTX_REG129, RXDFE_CONFIG,
-			   pdata->serdes_dfe_tap_cfg[XGBE_SPEED_1000]);
-	XRXTX_IOWRITE(pdata, RXTX_REG22,
-		      pdata->serdes_dfe_tap_ena[XGBE_SPEED_1000]);
+	pdata->hw_if.set_speed(pdata, SPEED_1000);

-	xgbe_serdes_complete_ratechange(pdata);
-
-	netif_dbg(pdata, link, pdata->netdev, "1GbE KX mode set\n");
+	/* Call PHY implementation support to complete rate change */
+	pdata->phy_if.phy_impl.set_mode(pdata, XGBE_MODE_KX_1000);
 }

-static void xgbe_cur_mode(struct xgbe_prv_data *pdata,
-			  enum xgbe_mode *mode)
+static enum xgbe_mode xgbe_cur_mode(struct xgbe_prv_data *pdata)
 {
-	unsigned int reg;
-
-	reg = XMDIO_READ(pdata, MDIO_MMD_PCS, MDIO_CTRL2);
-	if ((reg & MDIO_PCS_CTRL2_TYPE) == MDIO_PCS_CTRL2_10GBR)
-		*mode = XGBE_MODE_KR;
-	else
-		*mode = XGBE_MODE_KX;
+	return pdata->phy_if.phy_impl.cur_mode(pdata);
 }

 static bool xgbe_in_kr_mode(struct xgbe_prv_data *pdata)
 {
-	enum xgbe_mode mode;
-
-	xgbe_cur_mode(pdata, &mode);
-
-	return (mode == XGBE_MODE_KR);
+	return (xgbe_cur_mode(pdata) == XGBE_MODE_KR);
 }

-static void xgbe_switch_mode(struct xgbe_prv_data *pdata)
+static void xgbe_change_mode(struct xgbe_prv_data *pdata,
+			     enum xgbe_mode mode)
 {
-	/* If we are in KR switch to KX, and vice-versa */
-	if (xgbe_in_kr_mode(pdata)) {
-		if (pdata->speed_set == XGBE_SPEEDSET_1000_10000)
-			xgbe_gmii_mode(pdata);
-		else
-			xgbe_gmii_2500_mode(pdata);
-	} else {
-		xgbe_xgmii_mode(pdata);
+	switch (mode) {
+	case XGBE_MODE_KX_1000:
+		xgbe_kx_1000_mode(pdata);
+		break;
+	case XGBE_MODE_KX_2500:
+		xgbe_kx_2500_mode(pdata);
+		break;
+	case XGBE_MODE_KR:
+		xgbe_kr_mode(pdata);
+		break;
+	case XGBE_MODE_UNKNOWN:
+		break;
+	default:
+		netif_dbg(pdata, link, pdata->netdev,
+			  "invalid operation mode requested (%u)\n", mode);
 	}
 }

-static void xgbe_set_mode(struct xgbe_prv_data *pdata,
-			  enum xgbe_mode mode)
-{
-	enum xgbe_mode cur_mode;
-
-	xgbe_cur_mode(pdata, &cur_mode);
-	if (mode != cur_mode)
-		xgbe_switch_mode(pdata);
-}
-
-static bool xgbe_use_xgmii_mode(struct xgbe_prv_data *pdata)
+static void xgbe_switch_mode(struct xgbe_prv_data *pdata)
 {
-	if (pdata->phy.autoneg == AUTONEG_ENABLE) {
-		if (pdata->phy.advertising & ADVERTISED_10000baseKR_Full)
-			return true;
-	} else {
-		if (pdata->phy.speed == SPEED_10000)
-			return true;
-	}
-
-	return false;
+	xgbe_change_mode(pdata, pdata->phy_if.phy_impl.switch_mode(pdata));
 }

-static bool xgbe_use_gmii_2500_mode(struct xgbe_prv_data *pdata)
+static void xgbe_set_mode(struct xgbe_prv_data *pdata,
+			  enum xgbe_mode mode)
 {
-	if (pdata->phy.autoneg == AUTONEG_ENABLE) {
-		if (pdata->phy.advertising & ADVERTISED_2500baseX_Full)
-			return true;
-	} else {
-		if (pdata->phy.speed == SPEED_2500)
-			return true;
-	}
+	if (mode == xgbe_cur_mode(pdata))
+		return;

-	return false;
+	xgbe_change_mode(pdata, mode);
 }

-static bool xgbe_use_gmii_mode(struct xgbe_prv_data *pdata)
+static bool xgbe_use_mode(struct xgbe_prv_data *pdata,
+			  enum xgbe_mode mode)
 {
-	if (pdata->phy.autoneg == AUTONEG_ENABLE) {
-		if (pdata->phy.advertising & ADVERTISED_1000baseKX_Full)
-			return true;
-	} else {
-		if (pdata->phy.speed == SPEED_1000)
-			return true;
-	}
-
-	return false;
+	return pdata->phy_if.phy_impl.use_mode(pdata, mode);
 }

 static void xgbe_set_an(struct xgbe_prv_data *pdata, bool enable, bool restart)
@@ -476,13 +287,15 @@ static enum xgbe_an xgbe_an_tx_training(
 	/* Start KR training */
 	reg = XMDIO_READ(pdata, MDIO_MMD_PMAPMD, MDIO_PMA_10GBR_PMD_CTRL);
 	if (reg & XGBE_KR_TRAINING_ENABLE) {
-		XSIR0_IOWRITE_BITS(pdata, SIR0_KR_RT_1, RESET, 1);
+		if (pdata->phy_if.phy_impl.kr_training_pre)
+			pdata->phy_if.phy_impl.kr_training_pre(pdata);

 		reg |= XGBE_KR_TRAINING_START;
 		XMDIO_WRITE(pdata, MDIO_MMD_PMAPMD, MDIO_PMA_10GBR_PMD_CTRL,
 			    reg);

-		XSIR0_IOWRITE_BITS(pdata, SIR0_KR_RT_1, RESET, 0);
+		if (pdata->phy_if.phy_impl.kr_training_post)
+			pdata->phy_if.phy_impl.kr_training_post(pdata);

 		netif_dbg(pdata, link, pdata->netdev,
 			  "KR training initiated\n");
@@ -571,7 +384,7 @@ static enum xgbe_an xgbe_an_page_receive
 	}

 	state = xgbe_in_kr_mode(pdata) ? &pdata->kr_state
-					   : &pdata->kx_state;
+				       : &pdata->kx_state;

 	switch (*state) {
 	case XGBE_RX_BPA:
@@ -907,24 +720,28 @@ static void xgbe_phy_adjust_link(struct
 		xgbe_phy_print_status(pdata);
 }

+static bool xgbe_phy_valid_speed(struct xgbe_prv_data *pdata, int speed)
+{
+	return pdata->phy_if.phy_impl.valid_speed(pdata, speed);
+}
+
 static int xgbe_phy_config_fixed(struct xgbe_prv_data *pdata)
 {
+	enum xgbe_mode mode;
+
 	netif_dbg(pdata, link, pdata->netdev, "fixed PHY configuration\n");

 	/* Disable auto-negotiation */
 	xgbe_disable_an(pdata);

-	/* Validate/Set specified speed */
-	switch (pdata->phy.speed) {
-	case SPEED_10000:
-		xgbe_set_mode(pdata, XGBE_MODE_KR);
-		break;
-
-	case SPEED_2500:
-	case SPEED_1000:
-		xgbe_set_mode(pdata, XGBE_MODE_KX);
+	/* Set specified mode for specified speed */
+	mode = pdata->phy_if.phy_impl.get_mode(pdata, pdata->phy.speed);
+	switch (mode) {
+	case XGBE_MODE_KX_1000:
+	case XGBE_MODE_KX_2500:
+	case XGBE_MODE_KR:
 		break;
-
+	case XGBE_MODE_UNKNOWN:
 	default:
 		return -EINVAL;
 	}
@@ -933,6 +750,8 @@ static int xgbe_phy_config_fixed(struct
 	if (pdata->phy.duplex != DUPLEX_FULL)
 		return -EINVAL;

+	xgbe_set_mode(pdata, mode);
+
 	return 0;
 }

@@ -950,11 +769,12 @@ static int __xgbe_phy_config_aneg(struct
 	disable_irq(pdata->an_irq);

 	/* Start auto-negotiation in a supported mode */
-	if (pdata->phy.advertising & ADVERTISED_10000baseKR_Full) {
+	if (xgbe_use_mode(pdata, XGBE_MODE_KR)) {
 		xgbe_set_mode(pdata, XGBE_MODE_KR);
-	} else if ((pdata->phy.advertising & ADVERTISED_1000baseKX_Full) ||
-		   (pdata->phy.advertising & ADVERTISED_2500baseX_Full)) {
-		xgbe_set_mode(pdata, XGBE_MODE_KX);
+	} else if (xgbe_use_mode(pdata, XGBE_MODE_KX_2500)) {
+		xgbe_set_mode(pdata, XGBE_MODE_KX_2500);
+	} else if (xgbe_use_mode(pdata, XGBE_MODE_KX_1000)) {
+		xgbe_set_mode(pdata, XGBE_MODE_KX_1000);
 	} else {
 		enable_irq(pdata->an_irq);
 		return -EINVAL;
@@ -1016,108 +836,45 @@ static void xgbe_check_link_timeout(stru
 	}
 }

-static void xgbe_phy_status_force(struct xgbe_prv_data *pdata)
+static enum xgbe_mode xgbe_phy_status_aneg(struct xgbe_prv_data *pdata)
 {
-	if (xgbe_in_kr_mode(pdata)) {
-		pdata->phy.speed = SPEED_10000;
-	} else {
-		switch (pdata->speed_set) {
-		case XGBE_SPEEDSET_1000_10000:
-			pdata->phy.speed = SPEED_1000;
-			break;
-
-		case XGBE_SPEEDSET_2500_10000:
-			pdata->phy.speed = SPEED_2500;
-			break;
-		}
-	}
-	pdata->phy.duplex = DUPLEX_FULL;
+	return pdata->phy_if.phy_impl.an_outcome(pdata);
 }

-static void xgbe_phy_status_aneg(struct xgbe_prv_data *pdata)
+static void xgbe_phy_status_result(struct xgbe_prv_data *pdata)
 {
-	unsigned int ad_reg, lp_reg;
+	enum xgbe_mode mode;

 	pdata->phy.lp_advertising = 0;

 	if ((pdata->phy.autoneg != AUTONEG_ENABLE) || pdata->parallel_detect)
-		return xgbe_phy_status_force(pdata);
-
-	pdata->phy.lp_advertising |= ADVERTISED_Autoneg;
-	pdata->phy.lp_advertising |= ADVERTISED_Backplane;
-
-	/* Compare Advertisement and Link Partner register 1 */
-	ad_reg = XMDIO_READ(pdata, MDIO_MMD_AN, MDIO_AN_ADVERTISE);
-	lp_reg = XMDIO_READ(pdata, MDIO_MMD_AN, MDIO_AN_LPA);
-	if (lp_reg & 0x400)
-		pdata->phy.lp_advertising |= ADVERTISED_Pause;
-	if (lp_reg & 0x800)
-		pdata->phy.lp_advertising |= ADVERTISED_Asym_Pause;
-
-	if (pdata->phy.pause_autoneg) {
-		/* Set flow control based on auto-negotiation result */
-		pdata->phy.tx_pause = 0;
-		pdata->phy.rx_pause = 0;
-
-		if (ad_reg & lp_reg & 0x400) {
-			pdata->phy.tx_pause = 1;
-			pdata->phy.rx_pause = 1;
-		} else if (ad_reg & lp_reg & 0x800) {
-			if (ad_reg & 0x400)
-				pdata->phy.rx_pause = 1;
-			else if (lp_reg & 0x400)
-				pdata->phy.tx_pause = 1;
-		}
-	}
-
-	/* Compare Advertisement and Link Partner register 2 */
-	ad_reg = XMDIO_READ(pdata, MDIO_MMD_AN, MDIO_AN_ADVERTISE + 1);
-	lp_reg = XMDIO_READ(pdata, MDIO_MMD_AN, MDIO_AN_LPA + 1);
-	if (lp_reg & 0x80)
-		pdata->phy.lp_advertising |= ADVERTISED_10000baseKR_Full;
-	if (lp_reg & 0x20) {
-		switch (pdata->speed_set) {
-		case XGBE_SPEEDSET_1000_10000:
-			pdata->phy.lp_advertising |= ADVERTISED_1000baseKX_Full;
-			break;
-		case XGBE_SPEEDSET_2500_10000:
-			pdata->phy.lp_advertising |= ADVERTISED_2500baseX_Full;
-			break;
-		}
-	}
+		mode = xgbe_cur_mode(pdata);
+	else
+		mode = xgbe_phy_status_aneg(pdata);

-	ad_reg &= lp_reg;
-	if (ad_reg & 0x80) {
+	switch (mode) {
+	case XGBE_MODE_KX_1000:
+		pdata->phy.speed = SPEED_1000;
+		break;
+	case XGBE_MODE_KX_2500:
+		pdata->phy.speed = SPEED_2500;
+		break;
+	case XGBE_MODE_KR:
 		pdata->phy.speed = SPEED_10000;
-		xgbe_set_mode(pdata, XGBE_MODE_KR);
-	} else if (ad_reg & 0x20) {
-		switch (pdata->speed_set) {
-		case XGBE_SPEEDSET_1000_10000:
-			pdata->phy.speed = SPEED_1000;
-			break;
-
-		case XGBE_SPEEDSET_2500_10000:
-			pdata->phy.speed = SPEED_2500;
-			break;
-		}
-
-		xgbe_set_mode(pdata, XGBE_MODE_KX);
-	} else {
+		break;
+	case XGBE_MODE_UNKNOWN:
+	default:
 		pdata->phy.speed = SPEED_UNKNOWN;
 	}

-	/* Compare Advertisement and Link Partner register 3 */
-	ad_reg = XMDIO_READ(pdata, MDIO_MMD_AN, MDIO_AN_ADVERTISE + 2);
-	lp_reg = XMDIO_READ(pdata, MDIO_MMD_AN, MDIO_AN_LPA + 2);
-	if (lp_reg & 0xc000)
-		pdata->phy.lp_advertising |= ADVERTISED_10000baseR_FEC;
-
 	pdata->phy.duplex = DUPLEX_FULL;
+
+	xgbe_set_mode(pdata, mode);
 }

 static void xgbe_phy_status(struct xgbe_prv_data *pdata)
 {
-	unsigned int reg, link_aneg;
+	unsigned int link_aneg;

 	if (test_bit(XGBE_LINK_ERR, &pdata->dev_state)) {
 		netif_carrier_off(pdata->netdev);
@@ -1128,20 +885,14 @@ static void xgbe_phy_status(struct xgbe_

 	link_aneg = (pdata->phy.autoneg == AUTONEG_ENABLE);

-	/* Get the link status. Link status is latched low, so read
-	 * once to clear and then read again to get current state
-	 */
-	reg = XMDIO_READ(pdata, MDIO_MMD_PCS, MDIO_STAT1);
-	reg = XMDIO_READ(pdata, MDIO_MMD_PCS, MDIO_STAT1);
-	pdata->phy.link = (reg & MDIO_STAT1_LSTATUS) ? 1 : 0;
-
+	pdata->phy.link = pdata->phy_if.phy_impl.link_status(pdata);
 	if (pdata->phy.link) {
 		if (link_aneg && !xgbe_phy_aneg_done(pdata)) {
 			xgbe_check_link_timeout(pdata);
 			return;
 		}

-		xgbe_phy_status_aneg(pdata);
+		xgbe_phy_status_result(pdata);

 		if (test_bit(XGBE_LINK_INIT, &pdata->dev_state))
 			clear_bit(XGBE_LINK_INIT, &pdata->dev_state);
@@ -1155,7 +906,7 @@ static void xgbe_phy_status(struct xgbe_
 				return;
 		}

-		xgbe_phy_status_aneg(pdata);
+		xgbe_phy_status_result(pdata);

 		netif_carrier_off(pdata->netdev);
 	}
@@ -1168,6 +919,12 @@ static void xgbe_phy_stop(struct xgbe_pr
 {
 	netif_dbg(pdata, link, pdata->netdev, "stopping PHY\n");

+	if (!pdata->phy_started)
+		return;
+
+	/* Indicate the PHY is down */
+	pdata->phy_started = 0;
+
 	/* Disable auto-negotiation */
 	xgbe_disable_an(pdata);

@@ -1176,6 +933,8 @@ static void xgbe_phy_stop(struct xgbe_pr

 	devm_free_irq(pdata->dev, pdata->an_irq, pdata);

+	pdata->phy_if.phy_impl.stop(pdata);
+
 	pdata->phy.link = 0;
 	netif_carrier_off(pdata->netdev);

@@ -1189,28 +948,35 @@ static int xgbe_phy_start(struct xgbe_pr

 	netif_dbg(pdata, link, pdata->netdev, "starting PHY\n");

+	ret = pdata->phy_if.phy_impl.start(pdata);
+	if (ret)
+		return ret;
+
 	ret = devm_request_irq(pdata->dev, pdata->an_irq,
 			       xgbe_an_isr, 0, pdata->an_name,
 			       pdata);
 	if (ret) {
 		netdev_err(netdev, "phy irq request failed\n");
-		return ret;
+		goto err_stop;
 	}

 	/* Set initial mode - call the mode setting routines
 	 * directly to insure we are properly configured
 	 */
-	if (xgbe_use_xgmii_mode(pdata)) {
-		xgbe_xgmii_mode(pdata);
-	} else if (xgbe_use_gmii_mode(pdata)) {
-		xgbe_gmii_mode(pdata);
-	} else if (xgbe_use_gmii_2500_mode(pdata)) {
-		xgbe_gmii_2500_mode(pdata);
+	if (xgbe_use_mode(pdata, XGBE_MODE_KR)) {
+		xgbe_kr_mode(pdata);
+	} else if (xgbe_use_mode(pdata, XGBE_MODE_KX_2500)) {
+		xgbe_kx_2500_mode(pdata);
+	} else if (xgbe_use_mode(pdata, XGBE_MODE_KX_1000)) {
+		xgbe_kx_1000_mode(pdata);
 	} else {
 		ret = -EINVAL;
 		goto err_irq;
 	}

+	/* Indicate the PHY is up and running */
+	pdata->phy_started = 1;
+
 	/* Set up advertisement registers based on current settings */
 	xgbe_an_init(pdata);

@@ -1222,25 +988,19 @@ static int xgbe_phy_start(struct xgbe_pr
 err_irq:
 	devm_free_irq(pdata->dev, pdata->an_irq, pdata);

+err_stop:
+	pdata->phy_if.phy_impl.stop(pdata);
+
 	return ret;
 }

 static int xgbe_phy_reset(struct xgbe_prv_data *pdata)
 {
-	unsigned int count, reg;
-
-	reg = XMDIO_READ(pdata, MDIO_MMD_PCS, MDIO_CTRL1);
-	reg |= MDIO_CTRL1_RESET;
-	XMDIO_WRITE(pdata, MDIO_MMD_PCS, MDIO_CTRL1, reg);
-
-	count = 50;
-	do {
-		msleep(20);
-		reg = XMDIO_READ(pdata, MDIO_MMD_PCS, MDIO_CTRL1);
-	} while ((reg & MDIO_CTRL1_RESET) && --count);
+	int ret;

-	if (reg & MDIO_CTRL1_RESET)
-		return -ETIMEDOUT;
+	ret = pdata->phy_if.phy_impl.reset(pdata);
+	if (ret)
+		return ret;

 	/* Disable auto-negotiation for now */
 	xgbe_disable_an(pdata);
@@ -1290,41 +1050,57 @@ static void xgbe_dump_phy_registers(stru
 	dev_dbg(dev, "\n*************************************************\n");
 }

-static void xgbe_phy_init(struct xgbe_prv_data *pdata)
+static int xgbe_phy_best_advertised_speed(struct xgbe_prv_data *pdata)
+{
+	if (pdata->phy.advertising & ADVERTISED_10000baseKR_Full)
+		return SPEED_10000;
+	else if (pdata->phy.advertising & ADVERTISED_2500baseX_Full)
+		return SPEED_2500;
+	else if (pdata->phy.advertising & ADVERTISED_1000baseKX_Full)
+		return SPEED_1000;
+
+	return SPEED_UNKNOWN;
+}
+
+static void xgbe_phy_exit(struct xgbe_prv_data *pdata)
 {
+	xgbe_phy_stop(pdata);
+
+	pdata->phy_if.phy_impl.exit(pdata);
+}
+
+static int xgbe_phy_init(struct xgbe_prv_data *pdata)
+{
+	int ret;
+
 	mutex_init(&pdata->an_mutex);
 	INIT_WORK(&pdata->an_irq_work, xgbe_an_irq_work);
 	INIT_WORK(&pdata->an_work, xgbe_an_state_machine);
 	pdata->mdio_mmd = MDIO_MMD_PCS;

-	/* Initialize supported features */
-	pdata->phy.supported = SUPPORTED_Autoneg;
-	pdata->phy.supported |= SUPPORTED_Pause | SUPPORTED_Asym_Pause;
-	pdata->phy.supported |= SUPPORTED_Backplane;
-	pdata->phy.supported |= SUPPORTED_10000baseKR_Full;
-	switch (pdata->speed_set) {
-	case XGBE_SPEEDSET_1000_10000:
-		pdata->phy.supported |= SUPPORTED_1000baseKX_Full;
-		break;
-	case XGBE_SPEEDSET_2500_10000:
-		pdata->phy.supported |= SUPPORTED_2500baseX_Full;
-		break;
-	}
-
+	/* Check for FEC support */
 	pdata->fec_ability = XMDIO_READ(pdata, MDIO_MMD_PMAPMD,
 					MDIO_PMA_10GBR_FECABLE);
 	pdata->fec_ability &= (MDIO_PMA_10GBR_FECABLE_ABLE |
 			       MDIO_PMA_10GBR_FECABLE_ERRABLE);
-	if (pdata->fec_ability & MDIO_PMA_10GBR_FECABLE_ABLE)
-		pdata->phy.supported |= SUPPORTED_10000baseR_FEC;

+	/* Setup the phy (including supported features) */
+	ret = pdata->phy_if.phy_impl.init(pdata);
+	if (ret)
+		return ret;
 	pdata->phy.advertising = pdata->phy.supported;

 	pdata->phy.address = 0;

-	pdata->phy.autoneg = AUTONEG_ENABLE;
-	pdata->phy.speed = SPEED_UNKNOWN;
-	pdata->phy.duplex = DUPLEX_UNKNOWN;
+	if (pdata->phy.advertising & ADVERTISED_Autoneg) {
+		pdata->phy.autoneg = AUTONEG_ENABLE;
+		pdata->phy.speed = SPEED_UNKNOWN;
+		pdata->phy.duplex = DUPLEX_UNKNOWN;
+	} else {
+		pdata->phy.autoneg = AUTONEG_DISABLE;
+		pdata->phy.speed = xgbe_phy_best_advertised_speed(pdata);
+		pdata->phy.duplex = DUPLEX_FULL;
+	}

 	pdata->phy.link = 0;

@@ -1346,11 +1122,14 @@ static void xgbe_phy_init(struct xgbe_pr

 	if (netif_msg_drv(pdata))
 		xgbe_dump_phy_registers(pdata);
+
+	return 0;
 }

 void xgbe_init_function_ptrs_phy(struct xgbe_phy_if *phy_if)
 {
 	phy_if->phy_init        = xgbe_phy_init;
+	phy_if->phy_exit        = xgbe_phy_exit;

 	phy_if->phy_reset       = xgbe_phy_reset;
 	phy_if->phy_start       = xgbe_phy_start;
@@ -1358,4 +1137,6 @@ void xgbe_init_function_ptrs_phy(struct

 	phy_if->phy_status      = xgbe_phy_status;
 	phy_if->phy_config_aneg = xgbe_phy_config_aneg;
+
+	phy_if->phy_valid_speed = xgbe_phy_valid_speed;
 }
--- /dev/null
+++ b/drivers/net/ethernet/amd/xgbe/xgbe-phy-v1.c
@@ -0,0 +1,821 @@
+/*
+ * AMD 10Gb Ethernet driver
+ *
+ * This file is available to you under your choice of the following two
+ * licenses:
+ *
+ * License 1: GPLv2
+ *
+ * Copyright (c) 2016 Advanced Micro Devices, Inc.
+ *
+ * This file is free software; you may copy, redistribute and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or (at
+ * your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ * This file incorporates work covered by the following copyright and
+ * permission notice:
+ *     The Synopsys DWC ETHER XGMAC Software Driver and documentation
+ *     (hereinafter "Software") is an unsupported proprietary work of Synopsys,
+ *     Inc. unless otherwise expressly agreed to in writing between Synopsys
+ *     and you.
+ *
+ *     The Software IS NOT an item of Licensed Software or Licensed Product
+ *     under any End User Software License Agreement or Agreement for Licensed
+ *     Product with Synopsys or any supplement thereto.  Permission is hereby
+ *     granted, free of charge, to any person obtaining a copy of this software
+ *     annotated with this license and the Software, to deal in the Software
+ *     without restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or sell copies
+ *     of the Software, and to permit persons to whom the Software is furnished
+ *     to do so, subject to the following conditions:
+ *
+ *     The above copyright notice and this permission notice shall be included
+ *     in all copies or substantial portions of the Software.
+ *
+ *     THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS"
+ *     BASIS AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
+ *     TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
+ *     PARTICULAR PURPOSE ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS
+ *     BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ *     CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ *     SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ *     INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ *     CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ *     ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
+ *     THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *
+ * License 2: Modified BSD
+ *
+ * Copyright (c) 2016 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL <COPYRIGHT HOLDER> BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * This file incorporates work covered by the following copyright and
+ * permission notice:
+ *     The Synopsys DWC ETHER XGMAC Software Driver and documentation
+ *     (hereinafter "Software") is an unsupported proprietary work of Synopsys,
+ *     Inc. unless otherwise expressly agreed to in writing between Synopsys
+ *     and you.
+ *
+ *     The Software IS NOT an item of Licensed Software or Licensed Product
+ *     under any End User Software License Agreement or Agreement for Licensed
+ *     Product with Synopsys or any supplement thereto.  Permission is hereby
+ *     granted, free of charge, to any person obtaining a copy of this software
+ *     annotated with this license and the Software, to deal in the Software
+ *     without restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or sell copies
+ *     of the Software, and to permit persons to whom the Software is furnished
+ *     to do so, subject to the following conditions:
+ *
+ *     The above copyright notice and this permission notice shall be included
+ *     in all copies or substantial portions of the Software.
+ *
+ *     THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS"
+ *     BASIS AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
+ *     TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
+ *     PARTICULAR PURPOSE ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS
+ *     BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ *     CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ *     SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ *     INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ *     CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ *     ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
+ *     THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <linux/module.h>
+#include <linux/kmod.h>
+#include <linux/device.h>
+#include <linux/property.h>
+#include <linux/mdio.h>
+#include <linux/phy.h>
+
+#include "xgbe.h"
+#include "xgbe-common.h"
+
+#define XGBE_BLWC_PROPERTY		"amd,serdes-blwc"
+#define XGBE_CDR_RATE_PROPERTY		"amd,serdes-cdr-rate"
+#define XGBE_PQ_SKEW_PROPERTY		"amd,serdes-pq-skew"
+#define XGBE_TX_AMP_PROPERTY		"amd,serdes-tx-amp"
+#define XGBE_DFE_CFG_PROPERTY		"amd,serdes-dfe-tap-config"
+#define XGBE_DFE_ENA_PROPERTY		"amd,serdes-dfe-tap-enable"
+
+/* Default SerDes settings */
+#define XGBE_SPEED_1000_BLWC		1
+#define XGBE_SPEED_1000_CDR		0x2
+#define XGBE_SPEED_1000_PLL		0x0
+#define XGBE_SPEED_1000_PQ		0xa
+#define XGBE_SPEED_1000_RATE		0x3
+#define XGBE_SPEED_1000_TXAMP		0xf
+#define XGBE_SPEED_1000_WORD		0x1
+#define XGBE_SPEED_1000_DFE_TAP_CONFIG	0x3
+#define XGBE_SPEED_1000_DFE_TAP_ENABLE	0x0
+
+#define XGBE_SPEED_2500_BLWC		1
+#define XGBE_SPEED_2500_CDR		0x2
+#define XGBE_SPEED_2500_PLL		0x0
+#define XGBE_SPEED_2500_PQ		0xa
+#define XGBE_SPEED_2500_RATE		0x1
+#define XGBE_SPEED_2500_TXAMP		0xf
+#define XGBE_SPEED_2500_WORD		0x1
+#define XGBE_SPEED_2500_DFE_TAP_CONFIG	0x3
+#define XGBE_SPEED_2500_DFE_TAP_ENABLE	0x0
+
+#define XGBE_SPEED_10000_BLWC		0
+#define XGBE_SPEED_10000_CDR		0x7
+#define XGBE_SPEED_10000_PLL		0x1
+#define XGBE_SPEED_10000_PQ		0x12
+#define XGBE_SPEED_10000_RATE		0x0
+#define XGBE_SPEED_10000_TXAMP		0xa
+#define XGBE_SPEED_10000_WORD		0x7
+#define XGBE_SPEED_10000_DFE_TAP_CONFIG	0x1
+#define XGBE_SPEED_10000_DFE_TAP_ENABLE	0x7f
+
+/* Rate-change complete wait/retry count */
+#define XGBE_RATECHANGE_COUNT		500
+
+static const u32 xgbe_phy_blwc[] = {
+	XGBE_SPEED_1000_BLWC,
+	XGBE_SPEED_2500_BLWC,
+	XGBE_SPEED_10000_BLWC,
+};
+
+static const u32 xgbe_phy_cdr_rate[] = {
+	XGBE_SPEED_1000_CDR,
+	XGBE_SPEED_2500_CDR,
+	XGBE_SPEED_10000_CDR,
+};
+
+static const u32 xgbe_phy_pq_skew[] = {
+	XGBE_SPEED_1000_PQ,
+	XGBE_SPEED_2500_PQ,
+	XGBE_SPEED_10000_PQ,
+};
+
+static const u32 xgbe_phy_tx_amp[] = {
+	XGBE_SPEED_1000_TXAMP,
+	XGBE_SPEED_2500_TXAMP,
+	XGBE_SPEED_10000_TXAMP,
+};
+
+static const u32 xgbe_phy_dfe_tap_cfg[] = {
+	XGBE_SPEED_1000_DFE_TAP_CONFIG,
+	XGBE_SPEED_2500_DFE_TAP_CONFIG,
+	XGBE_SPEED_10000_DFE_TAP_CONFIG,
+};
+
+static const u32 xgbe_phy_dfe_tap_ena[] = {
+	XGBE_SPEED_1000_DFE_TAP_ENABLE,
+	XGBE_SPEED_2500_DFE_TAP_ENABLE,
+	XGBE_SPEED_10000_DFE_TAP_ENABLE,
+};
+
+struct xgbe_phy_data {
+	/* 1000/10000 vs 2500/10000 indicator */
+	unsigned int speed_set;
+
+	/* SerDes UEFI configurable settings.
+	 *   Switching between modes/speeds requires new values for some
+	 *   SerDes settings.  The values can be supplied as device
+	 *   properties in array format.  The first array entry is for
+	 *   1GbE, second for 2.5GbE and third for 10GbE
+	 */
+	u32 blwc[XGBE_SPEEDS];
+	u32 cdr_rate[XGBE_SPEEDS];
+	u32 pq_skew[XGBE_SPEEDS];
+	u32 tx_amp[XGBE_SPEEDS];
+	u32 dfe_tap_cfg[XGBE_SPEEDS];
+	u32 dfe_tap_ena[XGBE_SPEEDS];
+};
+
+static void xgbe_phy_kr_training_pre(struct xgbe_prv_data *pdata)
+{
+		XSIR0_IOWRITE_BITS(pdata, SIR0_KR_RT_1, RESET, 1);
+}
+
+static void xgbe_phy_kr_training_post(struct xgbe_prv_data *pdata)
+{
+		XSIR0_IOWRITE_BITS(pdata, SIR0_KR_RT_1, RESET, 0);
+}
+
+static enum xgbe_mode xgbe_phy_an_outcome(struct xgbe_prv_data *pdata)
+{
+	struct xgbe_phy_data *phy_data = pdata->phy_data;
+	enum xgbe_mode mode;
+	unsigned int ad_reg, lp_reg;
+
+	pdata->phy.lp_advertising |= ADVERTISED_Autoneg;
+	pdata->phy.lp_advertising |= ADVERTISED_Backplane;
+
+	/* Compare Advertisement and Link Partner register 1 */
+	ad_reg = XMDIO_READ(pdata, MDIO_MMD_AN, MDIO_AN_ADVERTISE);
+	lp_reg = XMDIO_READ(pdata, MDIO_MMD_AN, MDIO_AN_LPA);
+	if (lp_reg & 0x400)
+		pdata->phy.lp_advertising |= ADVERTISED_Pause;
+	if (lp_reg & 0x800)
+		pdata->phy.lp_advertising |= ADVERTISED_Asym_Pause;
+
+	if (pdata->phy.pause_autoneg) {
+		/* Set flow control based on auto-negotiation result */
+		pdata->phy.tx_pause = 0;
+		pdata->phy.rx_pause = 0;
+
+		if (ad_reg & lp_reg & 0x400) {
+			pdata->phy.tx_pause = 1;
+			pdata->phy.rx_pause = 1;
+		} else if (ad_reg & lp_reg & 0x800) {
+			if (ad_reg & 0x400)
+				pdata->phy.rx_pause = 1;
+			else if (lp_reg & 0x400)
+				pdata->phy.tx_pause = 1;
+		}
+	}
+
+	/* Compare Advertisement and Link Partner register 2 */
+	ad_reg = XMDIO_READ(pdata, MDIO_MMD_AN, MDIO_AN_ADVERTISE + 1);
+	lp_reg = XMDIO_READ(pdata, MDIO_MMD_AN, MDIO_AN_LPA + 1);
+	if (lp_reg & 0x80)
+		pdata->phy.lp_advertising |= ADVERTISED_10000baseKR_Full;
+	if (lp_reg & 0x20) {
+		if (phy_data->speed_set == XGBE_SPEEDSET_2500_10000)
+			pdata->phy.lp_advertising |= ADVERTISED_2500baseX_Full;
+		else
+			pdata->phy.lp_advertising |= ADVERTISED_1000baseKX_Full;
+	}
+
+	ad_reg &= lp_reg;
+	if (ad_reg & 0x80) {
+		mode = XGBE_MODE_KR;
+	} else if (ad_reg & 0x20) {
+		if (phy_data->speed_set == XGBE_SPEEDSET_2500_10000)
+			mode = XGBE_MODE_KX_2500;
+		else
+			mode = XGBE_MODE_KX_1000;
+	} else {
+		mode = XGBE_MODE_UNKNOWN;
+	}
+
+	/* Compare Advertisement and Link Partner register 3 */
+	ad_reg = XMDIO_READ(pdata, MDIO_MMD_AN, MDIO_AN_ADVERTISE + 2);
+	lp_reg = XMDIO_READ(pdata, MDIO_MMD_AN, MDIO_AN_LPA + 2);
+	if (lp_reg & 0xc000)
+		pdata->phy.lp_advertising |= ADVERTISED_10000baseR_FEC;
+
+	return mode;
+}
+
+static void xgbe_phy_pcs_power_cycle(struct xgbe_prv_data *pdata)
+{
+	unsigned int reg;
+
+	reg = XMDIO_READ(pdata, MDIO_MMD_PCS, MDIO_CTRL1);
+
+	reg |= MDIO_CTRL1_LPOWER;
+	XMDIO_WRITE(pdata, MDIO_MMD_PCS, MDIO_CTRL1, reg);
+
+	usleep_range(75, 100);
+
+	reg &= ~MDIO_CTRL1_LPOWER;
+	XMDIO_WRITE(pdata, MDIO_MMD_PCS, MDIO_CTRL1, reg);
+}
+
+static void xgbe_phy_start_ratechange(struct xgbe_prv_data *pdata)
+{
+	/* Assert Rx and Tx ratechange */
+	XSIR1_IOWRITE_BITS(pdata, SIR1_SPEED, RATECHANGE, 1);
+}
+
+static void xgbe_phy_complete_ratechange(struct xgbe_prv_data *pdata)
+{
+	unsigned int wait;
+	u16 status;
+
+	/* Release Rx and Tx ratechange */
+	XSIR1_IOWRITE_BITS(pdata, SIR1_SPEED, RATECHANGE, 0);
+
+	/* Wait for Rx and Tx ready */
+	wait = XGBE_RATECHANGE_COUNT;
+	while (wait--) {
+		usleep_range(50, 75);
+
+		status = XSIR0_IOREAD(pdata, SIR0_STATUS);
+		if (XSIR_GET_BITS(status, SIR0_STATUS, RX_READY) &&
+		    XSIR_GET_BITS(status, SIR0_STATUS, TX_READY))
+			goto rx_reset;
+	}
+
+	netif_dbg(pdata, link, pdata->netdev, "SerDes rx/tx not ready (%#hx)\n",
+		  status);
+
+rx_reset:
+	/* Perform Rx reset for the DFE changes */
+	XRXTX_IOWRITE_BITS(pdata, RXTX_REG6, RESETB_RXD, 0);
+	XRXTX_IOWRITE_BITS(pdata, RXTX_REG6, RESETB_RXD, 1);
+}
+
+static void xgbe_phy_kr_mode(struct xgbe_prv_data *pdata)
+{
+	struct xgbe_phy_data *phy_data = pdata->phy_data;
+	unsigned int reg;
+
+	/* Set PCS to KR/10G speed */
+	reg = XMDIO_READ(pdata, MDIO_MMD_PCS, MDIO_CTRL2);
+	reg &= ~MDIO_PCS_CTRL2_TYPE;
+	reg |= MDIO_PCS_CTRL2_10GBR;
+	XMDIO_WRITE(pdata, MDIO_MMD_PCS, MDIO_CTRL2, reg);
+
+	reg = XMDIO_READ(pdata, MDIO_MMD_PCS, MDIO_CTRL1);
+	reg &= ~MDIO_CTRL1_SPEEDSEL;
+	reg |= MDIO_CTRL1_SPEED10G;
+	XMDIO_WRITE(pdata, MDIO_MMD_PCS, MDIO_CTRL1, reg);
+
+	xgbe_phy_pcs_power_cycle(pdata);
+
+	/* Set SerDes to 10G speed */
+	xgbe_phy_start_ratechange(pdata);
+
+	XSIR1_IOWRITE_BITS(pdata, SIR1_SPEED, DATARATE, XGBE_SPEED_10000_RATE);
+	XSIR1_IOWRITE_BITS(pdata, SIR1_SPEED, WORDMODE, XGBE_SPEED_10000_WORD);
+	XSIR1_IOWRITE_BITS(pdata, SIR1_SPEED, PLLSEL, XGBE_SPEED_10000_PLL);
+
+	XSIR1_IOWRITE_BITS(pdata, SIR1_SPEED, CDR_RATE,
+			   phy_data->cdr_rate[XGBE_SPEED_10000]);
+	XSIR1_IOWRITE_BITS(pdata, SIR1_SPEED, TXAMP,
+			   phy_data->tx_amp[XGBE_SPEED_10000]);
+	XRXTX_IOWRITE_BITS(pdata, RXTX_REG20, BLWC_ENA,
+			   phy_data->blwc[XGBE_SPEED_10000]);
+	XRXTX_IOWRITE_BITS(pdata, RXTX_REG114, PQ_REG,
+			   phy_data->pq_skew[XGBE_SPEED_10000]);
+	XRXTX_IOWRITE_BITS(pdata, RXTX_REG129, RXDFE_CONFIG,
+			   phy_data->dfe_tap_cfg[XGBE_SPEED_10000]);
+	XRXTX_IOWRITE(pdata, RXTX_REG22,
+		      phy_data->dfe_tap_ena[XGBE_SPEED_10000]);
+
+	xgbe_phy_complete_ratechange(pdata);
+
+	netif_dbg(pdata, link, pdata->netdev, "10GbE KR mode set\n");
+}
+
+static void xgbe_phy_kx_2500_mode(struct xgbe_prv_data *pdata)
+{
+	struct xgbe_phy_data *phy_data = pdata->phy_data;
+	unsigned int reg;
+
+	/* Set PCS to KX/1G speed */
+	reg = XMDIO_READ(pdata, MDIO_MMD_PCS, MDIO_CTRL2);
+	reg &= ~MDIO_PCS_CTRL2_TYPE;
+	reg |= MDIO_PCS_CTRL2_10GBX;
+	XMDIO_WRITE(pdata, MDIO_MMD_PCS, MDIO_CTRL2, reg);
+
+	reg = XMDIO_READ(pdata, MDIO_MMD_PCS, MDIO_CTRL1);
+	reg &= ~MDIO_CTRL1_SPEEDSEL;
+	reg |= MDIO_CTRL1_SPEED1G;
+	XMDIO_WRITE(pdata, MDIO_MMD_PCS, MDIO_CTRL1, reg);
+
+	xgbe_phy_pcs_power_cycle(pdata);
+
+	/* Set SerDes to 2.5G speed */
+	xgbe_phy_start_ratechange(pdata);
+
+	XSIR1_IOWRITE_BITS(pdata, SIR1_SPEED, DATARATE, XGBE_SPEED_2500_RATE);
+	XSIR1_IOWRITE_BITS(pdata, SIR1_SPEED, WORDMODE, XGBE_SPEED_2500_WORD);
+	XSIR1_IOWRITE_BITS(pdata, SIR1_SPEED, PLLSEL, XGBE_SPEED_2500_PLL);
+
+	XSIR1_IOWRITE_BITS(pdata, SIR1_SPEED, CDR_RATE,
+			   phy_data->cdr_rate[XGBE_SPEED_2500]);
+	XSIR1_IOWRITE_BITS(pdata, SIR1_SPEED, TXAMP,
+			   phy_data->tx_amp[XGBE_SPEED_2500]);
+	XRXTX_IOWRITE_BITS(pdata, RXTX_REG20, BLWC_ENA,
+			   phy_data->blwc[XGBE_SPEED_2500]);
+	XRXTX_IOWRITE_BITS(pdata, RXTX_REG114, PQ_REG,
+			   phy_data->pq_skew[XGBE_SPEED_2500]);
+	XRXTX_IOWRITE_BITS(pdata, RXTX_REG129, RXDFE_CONFIG,
+			   phy_data->dfe_tap_cfg[XGBE_SPEED_2500]);
+	XRXTX_IOWRITE(pdata, RXTX_REG22,
+		      phy_data->dfe_tap_ena[XGBE_SPEED_2500]);
+
+	xgbe_phy_complete_ratechange(pdata);
+
+	netif_dbg(pdata, link, pdata->netdev, "2.5GbE KX mode set\n");
+}
+
+static void xgbe_phy_kx_1000_mode(struct xgbe_prv_data *pdata)
+{
+	struct xgbe_phy_data *phy_data = pdata->phy_data;
+	unsigned int reg;
+
+	/* Set PCS to KX/1G speed */
+	reg = XMDIO_READ(pdata, MDIO_MMD_PCS, MDIO_CTRL2);
+	reg &= ~MDIO_PCS_CTRL2_TYPE;
+	reg |= MDIO_PCS_CTRL2_10GBX;
+	XMDIO_WRITE(pdata, MDIO_MMD_PCS, MDIO_CTRL2, reg);
+
+	reg = XMDIO_READ(pdata, MDIO_MMD_PCS, MDIO_CTRL1);
+	reg &= ~MDIO_CTRL1_SPEEDSEL;
+	reg |= MDIO_CTRL1_SPEED1G;
+	XMDIO_WRITE(pdata, MDIO_MMD_PCS, MDIO_CTRL1, reg);
+
+	xgbe_phy_pcs_power_cycle(pdata);
+
+	/* Set SerDes to 1G speed */
+	xgbe_phy_start_ratechange(pdata);
+
+	XSIR1_IOWRITE_BITS(pdata, SIR1_SPEED, DATARATE, XGBE_SPEED_1000_RATE);
+	XSIR1_IOWRITE_BITS(pdata, SIR1_SPEED, WORDMODE, XGBE_SPEED_1000_WORD);
+	XSIR1_IOWRITE_BITS(pdata, SIR1_SPEED, PLLSEL, XGBE_SPEED_1000_PLL);
+
+	XSIR1_IOWRITE_BITS(pdata, SIR1_SPEED, CDR_RATE,
+			   phy_data->cdr_rate[XGBE_SPEED_1000]);
+	XSIR1_IOWRITE_BITS(pdata, SIR1_SPEED, TXAMP,
+			   phy_data->tx_amp[XGBE_SPEED_1000]);
+	XRXTX_IOWRITE_BITS(pdata, RXTX_REG20, BLWC_ENA,
+			   phy_data->blwc[XGBE_SPEED_1000]);
+	XRXTX_IOWRITE_BITS(pdata, RXTX_REG114, PQ_REG,
+			   phy_data->pq_skew[XGBE_SPEED_1000]);
+	XRXTX_IOWRITE_BITS(pdata, RXTX_REG129, RXDFE_CONFIG,
+			   phy_data->dfe_tap_cfg[XGBE_SPEED_1000]);
+	XRXTX_IOWRITE(pdata, RXTX_REG22,
+		      phy_data->dfe_tap_ena[XGBE_SPEED_1000]);
+
+	xgbe_phy_complete_ratechange(pdata);
+
+	netif_dbg(pdata, link, pdata->netdev, "1GbE KX mode set\n");
+}
+
+static enum xgbe_mode xgbe_phy_cur_mode(struct xgbe_prv_data *pdata)
+{
+	struct xgbe_phy_data *phy_data = pdata->phy_data;
+	enum xgbe_mode mode;
+	unsigned int reg;
+
+	reg = XMDIO_READ(pdata, MDIO_MMD_PCS, MDIO_CTRL2);
+	reg &= MDIO_PCS_CTRL2_TYPE;
+
+	if (reg == MDIO_PCS_CTRL2_10GBR) {
+		mode = XGBE_MODE_KR;
+	} else {
+		if (phy_data->speed_set == XGBE_SPEEDSET_2500_10000)
+			mode = XGBE_MODE_KX_2500;
+		else
+			mode = XGBE_MODE_KX_1000;
+	}
+
+	return mode;
+}
+
+static enum xgbe_mode xgbe_phy_switch_mode(struct xgbe_prv_data *pdata)
+{
+	struct xgbe_phy_data *phy_data = pdata->phy_data;
+	enum xgbe_mode mode;
+
+	/* If we are in KR switch to KX, and vice-versa */
+	if (xgbe_phy_cur_mode(pdata) == XGBE_MODE_KR) {
+		if (phy_data->speed_set == XGBE_SPEEDSET_2500_10000)
+			mode = XGBE_MODE_KX_2500;
+		else
+			mode = XGBE_MODE_KX_1000;
+	} else {
+		mode = XGBE_MODE_KR;
+	}
+
+	return mode;
+}
+
+static enum xgbe_mode xgbe_phy_get_mode(struct xgbe_prv_data *pdata,
+					int speed)
+{
+	struct xgbe_phy_data *phy_data = pdata->phy_data;
+
+	switch (speed) {
+	case SPEED_1000:
+		return (phy_data->speed_set == XGBE_SPEEDSET_1000_10000)
+			? XGBE_MODE_KX_1000 : XGBE_MODE_UNKNOWN;
+	case SPEED_2500:
+		return (phy_data->speed_set == XGBE_SPEEDSET_2500_10000)
+			? XGBE_MODE_KX_2500 : XGBE_MODE_UNKNOWN;
+	case SPEED_10000:
+		return XGBE_MODE_KR;
+	default:
+		return XGBE_MODE_UNKNOWN;
+	}
+}
+
+static void xgbe_phy_set_mode(struct xgbe_prv_data *pdata, enum xgbe_mode mode)
+{
+	switch (mode) {
+	case XGBE_MODE_KX_1000:
+		xgbe_phy_kx_1000_mode(pdata);
+		break;
+	case XGBE_MODE_KX_2500:
+		xgbe_phy_kx_2500_mode(pdata);
+		break;
+	case XGBE_MODE_KR:
+		xgbe_phy_kr_mode(pdata);
+		break;
+	default:
+		break;
+	}
+}
+
+static bool xgbe_phy_check_mode(struct xgbe_prv_data *pdata,
+				enum xgbe_mode mode, u32 advert)
+{
+	if (pdata->phy.autoneg == AUTONEG_ENABLE) {
+		if (pdata->phy.advertising & advert)
+			return true;
+	} else {
+		enum xgbe_mode cur_mode;
+
+		cur_mode = xgbe_phy_get_mode(pdata, pdata->phy.speed);
+		if (cur_mode == mode)
+			return true;
+	}
+
+	return false;
+}
+
+static bool xgbe_phy_use_mode(struct xgbe_prv_data *pdata, enum xgbe_mode mode)
+{
+	switch (mode) {
+	case XGBE_MODE_KX_1000:
+		return xgbe_phy_check_mode(pdata, mode,
+					   ADVERTISED_1000baseKX_Full);
+	case XGBE_MODE_KX_2500:
+		return xgbe_phy_check_mode(pdata, mode,
+					   ADVERTISED_2500baseX_Full);
+	case XGBE_MODE_KR:
+		return xgbe_phy_check_mode(pdata, mode,
+					   ADVERTISED_10000baseKR_Full);
+	default:
+		return false;
+	}
+}
+
+static bool xgbe_phy_valid_speed(struct xgbe_prv_data *pdata, int speed)
+{
+	struct xgbe_phy_data *phy_data = pdata->phy_data;
+
+	switch (speed) {
+	case SPEED_1000:
+		if (phy_data->speed_set != XGBE_SPEEDSET_1000_10000)
+			return false;
+		return true;
+	case SPEED_2500:
+		if (phy_data->speed_set != XGBE_SPEEDSET_2500_10000)
+			return false;
+		return true;
+	case SPEED_10000:
+		return true;
+	default:
+		return false;
+	}
+}
+
+static int xgbe_phy_link_status(struct xgbe_prv_data *pdata)
+{
+	unsigned int reg;
+
+	/* Link status is latched low, so read once to clear
+	 * and then read again to get current state
+	 */
+	reg = XMDIO_READ(pdata, MDIO_MMD_PCS, MDIO_STAT1);
+	reg = XMDIO_READ(pdata, MDIO_MMD_PCS, MDIO_STAT1);
+
+	return (reg & MDIO_STAT1_LSTATUS) ? 1 : 0;
+}
+
+static void xgbe_phy_stop(struct xgbe_prv_data *pdata)
+{
+	/* Nothing uniquely required for stop */
+}
+
+static int xgbe_phy_start(struct xgbe_prv_data *pdata)
+{
+	/* Nothing uniquely required for start */
+	return 0;
+}
+
+static int xgbe_phy_reset(struct xgbe_prv_data *pdata)
+{
+	unsigned int reg, count;
+
+	/* Perform a software reset of the PCS */
+	reg = XMDIO_READ(pdata, MDIO_MMD_PCS, MDIO_CTRL1);
+	reg |= MDIO_CTRL1_RESET;
+	XMDIO_WRITE(pdata, MDIO_MMD_PCS, MDIO_CTRL1, reg);
+
+	count = 50;
+	do {
+		msleep(20);
+		reg = XMDIO_READ(pdata, MDIO_MMD_PCS, MDIO_CTRL1);
+	} while ((reg & MDIO_CTRL1_RESET) && --count);
+
+	if (reg & MDIO_CTRL1_RESET)
+		return -ETIMEDOUT;
+
+	return 0;
+}
+
+static void xgbe_phy_exit(struct xgbe_prv_data *pdata)
+{
+	/* Nothing uniquely required for exit */
+}
+
+static int xgbe_phy_init(struct xgbe_prv_data *pdata)
+{
+	struct xgbe_phy_data *phy_data;
+	int ret;
+
+	phy_data = devm_kzalloc(pdata->dev, sizeof(*phy_data), GFP_KERNEL);
+	if (!phy_data)
+		return -ENOMEM;
+
+	/* Retrieve the PHY speedset */
+	ret = device_property_read_u32(pdata->phy_dev, XGBE_SPEEDSET_PROPERTY,
+				       &phy_data->speed_set);
+	if (ret) {
+		dev_err(pdata->dev, "invalid %s property\n",
+			XGBE_SPEEDSET_PROPERTY);
+		return ret;
+	}
+
+	switch (phy_data->speed_set) {
+	case XGBE_SPEEDSET_1000_10000:
+	case XGBE_SPEEDSET_2500_10000:
+		break;
+	default:
+		dev_err(pdata->dev, "invalid %s property\n",
+			XGBE_SPEEDSET_PROPERTY);
+		return -EINVAL;
+	}
+
+	/* Retrieve the PHY configuration properties */
+	if (device_property_present(pdata->phy_dev, XGBE_BLWC_PROPERTY)) {
+		ret = device_property_read_u32_array(pdata->phy_dev,
+						     XGBE_BLWC_PROPERTY,
+						     phy_data->blwc,
+						     XGBE_SPEEDS);
+		if (ret) {
+			dev_err(pdata->dev, "invalid %s property\n",
+				XGBE_BLWC_PROPERTY);
+			return ret;
+		}
+	} else {
+		memcpy(phy_data->blwc, xgbe_phy_blwc,
+		       sizeof(phy_data->blwc));
+	}
+
+	if (device_property_present(pdata->phy_dev, XGBE_CDR_RATE_PROPERTY)) {
+		ret = device_property_read_u32_array(pdata->phy_dev,
+						     XGBE_CDR_RATE_PROPERTY,
+						     phy_data->cdr_rate,
+						     XGBE_SPEEDS);
+		if (ret) {
+			dev_err(pdata->dev, "invalid %s property\n",
+				XGBE_CDR_RATE_PROPERTY);
+			return ret;
+		}
+	} else {
+		memcpy(phy_data->cdr_rate, xgbe_phy_cdr_rate,
+		       sizeof(phy_data->cdr_rate));
+	}
+
+	if (device_property_present(pdata->phy_dev, XGBE_PQ_SKEW_PROPERTY)) {
+		ret = device_property_read_u32_array(pdata->phy_dev,
+						     XGBE_PQ_SKEW_PROPERTY,
+						     phy_data->pq_skew,
+						     XGBE_SPEEDS);
+		if (ret) {
+			dev_err(pdata->dev, "invalid %s property\n",
+				XGBE_PQ_SKEW_PROPERTY);
+			return ret;
+		}
+	} else {
+		memcpy(phy_data->pq_skew, xgbe_phy_pq_skew,
+		       sizeof(phy_data->pq_skew));
+	}
+
+	if (device_property_present(pdata->phy_dev, XGBE_TX_AMP_PROPERTY)) {
+		ret = device_property_read_u32_array(pdata->phy_dev,
+						     XGBE_TX_AMP_PROPERTY,
+						     phy_data->tx_amp,
+						     XGBE_SPEEDS);
+		if (ret) {
+			dev_err(pdata->dev, "invalid %s property\n",
+				XGBE_TX_AMP_PROPERTY);
+			return ret;
+		}
+	} else {
+		memcpy(phy_data->tx_amp, xgbe_phy_tx_amp,
+		       sizeof(phy_data->tx_amp));
+	}
+
+	if (device_property_present(pdata->phy_dev, XGBE_DFE_CFG_PROPERTY)) {
+		ret = device_property_read_u32_array(pdata->phy_dev,
+						     XGBE_DFE_CFG_PROPERTY,
+						     phy_data->dfe_tap_cfg,
+						     XGBE_SPEEDS);
+		if (ret) {
+			dev_err(pdata->dev, "invalid %s property\n",
+				XGBE_DFE_CFG_PROPERTY);
+			return ret;
+		}
+	} else {
+		memcpy(phy_data->dfe_tap_cfg, xgbe_phy_dfe_tap_cfg,
+		       sizeof(phy_data->dfe_tap_cfg));
+	}
+
+	if (device_property_present(pdata->phy_dev, XGBE_DFE_ENA_PROPERTY)) {
+		ret = device_property_read_u32_array(pdata->phy_dev,
+						     XGBE_DFE_ENA_PROPERTY,
+						     phy_data->dfe_tap_ena,
+						     XGBE_SPEEDS);
+		if (ret) {
+			dev_err(pdata->dev, "invalid %s property\n",
+				XGBE_DFE_ENA_PROPERTY);
+			return ret;
+		}
+	} else {
+		memcpy(phy_data->dfe_tap_ena, xgbe_phy_dfe_tap_ena,
+		       sizeof(phy_data->dfe_tap_ena));
+	}
+
+	/* Initialize supported features */
+	pdata->phy.supported = SUPPORTED_Autoneg;
+	pdata->phy.supported |= SUPPORTED_Pause | SUPPORTED_Asym_Pause;
+	pdata->phy.supported |= SUPPORTED_Backplane;
+	pdata->phy.supported |= SUPPORTED_10000baseKR_Full;
+	switch (phy_data->speed_set) {
+	case XGBE_SPEEDSET_1000_10000:
+		pdata->phy.supported |= SUPPORTED_1000baseKX_Full;
+		break;
+	case XGBE_SPEEDSET_2500_10000:
+		pdata->phy.supported |= SUPPORTED_2500baseX_Full;
+		break;
+	}
+
+	if (pdata->fec_ability & MDIO_PMA_10GBR_FECABLE_ABLE)
+		pdata->phy.supported |= SUPPORTED_10000baseR_FEC;
+
+	pdata->phy_data = phy_data;
+
+	return 0;
+}
+
+void xgbe_init_function_ptrs_phy_v1(struct xgbe_phy_if *phy_if)
+{
+	struct xgbe_phy_impl_if *phy_impl = &phy_if->phy_impl;
+
+	phy_impl->init			= xgbe_phy_init;
+	phy_impl->exit			= xgbe_phy_exit;
+
+	phy_impl->reset			= xgbe_phy_reset;
+	phy_impl->start			= xgbe_phy_start;
+	phy_impl->stop			= xgbe_phy_stop;
+
+	phy_impl->link_status		= xgbe_phy_link_status;
+
+	phy_impl->valid_speed		= xgbe_phy_valid_speed;
+
+	phy_impl->use_mode		= xgbe_phy_use_mode;
+	phy_impl->set_mode		= xgbe_phy_set_mode;
+	phy_impl->get_mode		= xgbe_phy_get_mode;
+	phy_impl->switch_mode		= xgbe_phy_switch_mode;
+	phy_impl->cur_mode		= xgbe_phy_cur_mode;
+
+	phy_impl->an_outcome		= xgbe_phy_an_outcome;
+
+	phy_impl->kr_training_pre	= xgbe_phy_kr_training_pre;
+	phy_impl->kr_training_post	= xgbe_phy_kr_training_post;
+}
--- a/drivers/net/ethernet/amd/xgbe/xgbe.h
+++ b/drivers/net/ethernet/amd/xgbe/xgbe.h
@@ -129,7 +129,7 @@
 #include <net/dcbnl.h>

 #define XGBE_DRV_NAME		"amd-xgbe"
-#define XGBE_DRV_VERSION	"1.0.2"
+#define XGBE_DRV_VERSION	"1.0.3"
 #define XGBE_DRV_DESC		"AMD 10 Gigabit Ethernet Driver"

 /* Descriptor related defines */
@@ -183,12 +183,6 @@
 #define XGBE_PHY_MODE_PROPERTY	"phy-mode"
 #define XGBE_DMA_IRQS_PROPERTY	"amd,per-channel-interrupt"
 #define XGBE_SPEEDSET_PROPERTY	"amd,speed-set"
-#define XGBE_BLWC_PROPERTY	"amd,serdes-blwc"
-#define XGBE_CDR_RATE_PROPERTY	"amd,serdes-cdr-rate"
-#define XGBE_PQ_SKEW_PROPERTY	"amd,serdes-pq-skew"
-#define XGBE_TX_AMP_PROPERTY	"amd,serdes-tx-amp"
-#define XGBE_DFE_CFG_PROPERTY	"amd,serdes-dfe-tap-config"
-#define XGBE_DFE_ENA_PROPERTY	"amd,serdes-dfe-tap-enable"

 /* Device-tree clock names */
 #define XGBE_DMA_CLOCK		"dma_clk"
@@ -251,40 +245,6 @@
 #define XGBE_AN_PG_RCV			0x04
 #define XGBE_AN_INT_MASK		0x07

-/* Rate-change complete wait/retry count */
-#define XGBE_RATECHANGE_COUNT		500
-
-/* Default SerDes settings */
-#define XGBE_SPEED_10000_BLWC		0
-#define XGBE_SPEED_10000_CDR		0x7
-#define XGBE_SPEED_10000_PLL		0x1
-#define XGBE_SPEED_10000_PQ		0x12
-#define XGBE_SPEED_10000_RATE		0x0
-#define XGBE_SPEED_10000_TXAMP		0xa
-#define XGBE_SPEED_10000_WORD		0x7
-#define XGBE_SPEED_10000_DFE_TAP_CONFIG	0x1
-#define XGBE_SPEED_10000_DFE_TAP_ENABLE	0x7f
-
-#define XGBE_SPEED_2500_BLWC		1
-#define XGBE_SPEED_2500_CDR		0x2
-#define XGBE_SPEED_2500_PLL		0x0
-#define XGBE_SPEED_2500_PQ		0xa
-#define XGBE_SPEED_2500_RATE		0x1
-#define XGBE_SPEED_2500_TXAMP		0xf
-#define XGBE_SPEED_2500_WORD		0x1
-#define XGBE_SPEED_2500_DFE_TAP_CONFIG	0x3
-#define XGBE_SPEED_2500_DFE_TAP_ENABLE	0x0
-
-#define XGBE_SPEED_1000_BLWC		1
-#define XGBE_SPEED_1000_CDR		0x2
-#define XGBE_SPEED_1000_PLL		0x0
-#define XGBE_SPEED_1000_PQ		0xa
-#define XGBE_SPEED_1000_RATE		0x3
-#define XGBE_SPEED_1000_TXAMP		0xf
-#define XGBE_SPEED_1000_WORD		0x1
-#define XGBE_SPEED_1000_DFE_TAP_CONFIG	0x3
-#define XGBE_SPEED_1000_DFE_TAP_ENABLE	0x0
-
 struct xgbe_prv_data;

 struct xgbe_packet_data {
@@ -504,8 +464,10 @@ enum xgbe_rx {
 };

 enum xgbe_mode {
-	XGBE_MODE_KR = 0,
-	XGBE_MODE_KX,
+	XGBE_MODE_KX_1000 = 0,
+	XGBE_MODE_KX_2500,
+	XGBE_MODE_KR,
+	XGBE_MODE_UNKNOWN,
 };

 enum xgbe_speedset {
@@ -601,9 +563,7 @@ struct xgbe_hw_if {

 	int (*read_mmd_regs)(struct xgbe_prv_data *, int, int);
 	void (*write_mmd_regs)(struct xgbe_prv_data *, int, int, int);
-	int (*set_gmii_speed)(struct xgbe_prv_data *);
-	int (*set_gmii_2500_speed)(struct xgbe_prv_data *);
-	int (*set_xgmii_speed)(struct xgbe_prv_data *);
+	int (*set_speed)(struct xgbe_prv_data *, int);

 	void (*enable_tx)(struct xgbe_prv_data *);
 	void (*disable_tx)(struct xgbe_prv_data *);
@@ -684,9 +644,50 @@ struct xgbe_hw_if {
 	int (*set_rss_lookup_table)(struct xgbe_prv_data *, const u32 *);
 };

+/* This structure represents implementation specific routines for an
+ * implementation of a PHY. All routines are required unless noted below.
+ *   Optional routines:
+ *     kr_training_pre, kr_training_post
+ */
+struct xgbe_phy_impl_if {
+	/* Perform Setup/teardown actions */
+	int (*init)(struct xgbe_prv_data *);
+	void (*exit)(struct xgbe_prv_data *);
+
+	/* Perform start/stop specific actions */
+	int (*reset)(struct xgbe_prv_data *);
+	int (*start)(struct xgbe_prv_data *);
+	void (*stop)(struct xgbe_prv_data *);
+
+	/* Return the link status */
+	int (*link_status)(struct xgbe_prv_data *);
+
+	/* Indicate if a particular speed is valid */
+	bool (*valid_speed)(struct xgbe_prv_data *, int);
+
+	/* Check if the specified mode can/should be used */
+	bool (*use_mode)(struct xgbe_prv_data *, enum xgbe_mode);
+	/* Switch the PHY into various modes */
+	void (*set_mode)(struct xgbe_prv_data *, enum xgbe_mode);
+	/* Retrieve mode needed for a specific speed */
+	enum xgbe_mode (*get_mode)(struct xgbe_prv_data *, int);
+	/* Retrieve new/next mode when trying to auto-negotiate */
+	enum xgbe_mode (*switch_mode)(struct xgbe_prv_data *);
+	/* Retrieve current mode */
+	enum xgbe_mode (*cur_mode)(struct xgbe_prv_data *);
+
+	/* Process results of auto-negotiation */
+	enum xgbe_mode (*an_outcome)(struct xgbe_prv_data *);
+
+	/* Pre/Post KR training enablement support */
+	void (*kr_training_pre)(struct xgbe_prv_data *);
+	void (*kr_training_post)(struct xgbe_prv_data *);
+};
+
 struct xgbe_phy_if {
-	/* For initial PHY setup */
-	void (*phy_init)(struct xgbe_prv_data *);
+	/* For PHY setup/teardown */
+	int (*phy_init)(struct xgbe_prv_data *);
+	void (*phy_exit)(struct xgbe_prv_data *);

 	/* For PHY support when setting device up/down */
 	int (*phy_reset)(struct xgbe_prv_data *);
@@ -696,6 +697,12 @@ struct xgbe_phy_if {
 	/* For PHY support while device is up */
 	void (*phy_status)(struct xgbe_prv_data *);
 	int (*phy_config_aneg)(struct xgbe_prv_data *);
+
+	/* For PHY settings validation */
+	bool (*phy_valid_speed)(struct xgbe_prv_data *, int);
+
+	/* PHY implementation specific services */
+	struct xgbe_phy_impl_if phy_impl;
 };

 struct xgbe_desc_if {
@@ -755,11 +762,20 @@ struct xgbe_hw_features {
 	unsigned int aux_snap_num;	/* Number of Aux snapshot inputs */
 };

+struct xgbe_version_data {
+	void (*init_function_ptrs_phy_impl)(struct xgbe_phy_if *);
+};
+
 struct xgbe_prv_data {
 	struct net_device *netdev;
 	struct platform_device *pdev;
 	struct acpi_device *adev;
 	struct device *dev;
+	struct platform_device *phy_pdev;
+	struct device *phy_dev;
+
+	/* Version related data */
+	struct xgbe_version_data *vdata;

 	/* ACPI or DT flag */
 	unsigned int use_acpi;
@@ -901,6 +917,8 @@ struct xgbe_prv_data {
 	int phy_speed;

 	/* MDIO/PHY related settings */
+	unsigned int phy_started;
+	void *phy_data;
 	struct xgbe_phy phy;
 	int mdio_mmd;
 	unsigned long link_check;
@@ -911,21 +929,6 @@ struct xgbe_prv_data {
 	int an_irq;
 	struct work_struct an_irq_work;

-	unsigned int speed_set;
-
-	/* SerDes UEFI configurable settings.
-	 *   Switching between modes/speeds requires new values for some
-	 *   SerDes settings.  The values can be supplied as device
-	 *   properties in array format.  The first array entry is for
-	 *   1GbE, second for 2.5GbE and third for 10GbE
-	 */
-	u32 serdes_blwc[XGBE_SPEEDS];
-	u32 serdes_cdr_rate[XGBE_SPEEDS];
-	u32 serdes_pq_skew[XGBE_SPEEDS];
-	u32 serdes_tx_amp[XGBE_SPEEDS];
-	u32 serdes_dfe_tap_cfg[XGBE_SPEEDS];
-	u32 serdes_dfe_tap_ena[XGBE_SPEEDS];
-
 	/* Auto-negotiation state machine support */
 	unsigned int an_int;
 	struct mutex an_mutex;
@@ -955,6 +958,7 @@ struct xgbe_prv_data {

 void xgbe_init_function_ptrs_dev(struct xgbe_hw_if *);
 void xgbe_init_function_ptrs_phy(struct xgbe_phy_if *);
+void xgbe_init_function_ptrs_phy_v1(struct xgbe_phy_if *);
 void xgbe_init_function_ptrs_desc(struct xgbe_desc_if *);
 const struct net_device_ops *xgbe_get_netdev_ops(void);
 const struct ethtool_ops *xgbe_get_ethtool_ops(void);


Patches currently in stable-queue which might be from gregkh@xxxxxxxxxxxxxxxxxxx are

queue-4.9/staging-android-ashmem-lseek-failed-due-to-no-fmode_lseek.patch
queue-4.9/arm64-dts-hisi-fix-hip06-sas-am-max-trans-quirk.patch
queue-4.9/scsi-ufs-introduce-ufshcd_quirk_prdt_byte_gran-quirk.patch
queue-4.9/acpi-button-change-default-behavior-to-lid_init_state-open.patch
queue-4.9/usb-musb-da8xx-fix-host-mode-suspend.patch
queue-4.9/drm-i915-fix-intel_bdw_ids-definition.patch
queue-4.9/sysfs-be-careful-of-error-returns-from-ops-show.patch
queue-4.9/mips-flush-wrong-invalid-ftlb-entry-for-huge-page.patch
queue-4.9/mips-end-spinlocks-with-.insn.patch
queue-4.9/mmc-sdhci-of-esdhc-remove-default-broken-cd-for-arm.patch
queue-4.9/kvm-arm-arm64-fix-locking-for-kvm_free_stage2_pgd.patch
queue-4.9/powerpc-disable-hfscr-if-tm-is-not-supported.patch
queue-4.9/metag-usercopy-add-missing-fixups.patch
queue-4.9/nios2-reserve-boot-memory-for-device-tree.patch
queue-4.9/alsa-usb-audio-add-implicit-fb-quirk-for-axe-fx-ii.patch
queue-4.9/svcauth_gss-close-connection-when-dropping-an-incoming-message.patch
queue-4.9/platform-x86-asus-wmi-detect-quirk_no_rfkill-from-the-dsdt.patch
queue-4.9/ring-buffer-fix-return-value-check-in-test_ringbuffer.patch
queue-4.9/ppdev-check-before-attaching-port.patch
queue-4.9/firmware-qcom-scm-fix-interrupted-scm-calls.patch
queue-4.9/pci-add-broadcom-northstar2-paxc-quirk-for-device-class-and-mpss.patch
queue-4.9/powerpc-64-fix-flush_-d-i-cache_range-called-from-modules.patch
queue-4.9/drm-sun4i-tcon-move-soc-specific-quirks-to-a-dt-matched-data-structure.patch
queue-4.9/acpi-gpio-do-not-fall-back-to-parsing-_crs-when-we-get-a-deferral.patch
queue-4.9/pci-explain-arm64-acpi-mcfg-quirk-kconfig-and-build-strategy.patch
queue-4.9/metag-usercopy-add-early-abort-to-copy_to_user.patch
queue-4.9/powerpc-crypto-crc32c-vpmsum-fix-missing-preempt_disable.patch
queue-4.9/hid-multitouch-do-not-retrieve-all-reports-for-all-devices.patch
queue-4.9/arm-arm64-kvm-take-mmap_sem-in-kvm_arch_prepare_memory_region.patch
queue-4.9/arm-dts-stih407-family-set-snps-dis_u3_susphy_quirk.patch
queue-4.9/rx51-broken-build.patch
queue-4.9/mips-ralink-fix-typos-in-rt3883-pinctrl.patch
queue-4.9/cfg80211-check-rdev-resume-callback-only-for-registered-wiphy.patch
queue-4.9/metag-usercopy-set-flags-before-addz.patch
queue-4.9/asoc-intel-bytct_rt5640-change-default-capture-settings.patch
queue-4.9/metag-usercopy-fix-src-fixup-in-from-user-rapf-loops.patch
queue-4.9/hid-asus-fix-keyboard-support.patch
queue-4.9/drm-sun4i-add-compatible-string-for-a31-a31s-tcon-timing-controller.patch
queue-4.9/arm64-pci-manage-controller-specific-data-on-per-controller-basis.patch
queue-4.9/platform-x86-acer-wmi-only-supports-amw0_guid1-on-acer-family.patch
queue-4.9/xtensa-make-__pa-work-with-uncached-kseg-addresses.patch
queue-4.9/asoc-codecs-rt5670-add-quirk-for-lenovo-thinkpad-10.patch
queue-4.9/clk-lpc32xx-add-a-quirk-for-pwm-and-ms-clock-dividers.patch
queue-4.9/powerpc-mm-add-missing-global-tlb-invalidate-if-cxl-is-active.patch
queue-4.9/tools-power-turbostat-dump-atom-p-states-correctly.patch
queue-4.9/clocksource-drivers-arm_arch_timer-don-t-assume-clock-runs-in-suspend.patch
queue-4.9/asoc-intel-cht_bsw_rt5645-add-baytrail-mclk-support.patch
queue-4.9/watchdog-s3c2410-fix-infinite-interrupt-in-soft-mode.patch
queue-4.9/arm64-pci-search-acpi-namespace-to-ensure-ecam-space-is-reserved.patch
queue-4.9/pci-add-mcfg-quirks-for-cavium-thunderx-pass1.x-host-controller.patch
queue-4.9/drm-i915-actually-drive-the-bdw-reserved-ids.patch
queue-4.9/net-mlx4_core-use-device-id-defines.patch
queue-4.9/scsi-ufs-introduce-a-new-ufshcd_statea-ufshcd_state_eh_scheduled.patch
queue-4.9/hid-sensor-hub-add-quirk-for-microsoft-surface-3.patch
queue-4.9/serial-8250_omap-add-omap_dma_tx_kick-quirk-for-am437x.patch
queue-4.9/brcmfmac-use-local-iftype-avoiding-use-after-free-of-virtual-interface.patch
queue-4.9/pci-acpi-check-for-platform-specific-mcfg-quirks.patch
queue-4.9/drm-vmwgfx-remove-getparam-error-message.patch
queue-4.9/mac80211-unconditionally-start-new-netdev-queues-with-itxq-support.patch
queue-4.9/dm-verity-fec-fix-bufio-leaks.patch
queue-4.9/x86-intel_idle-add-cpu-model-0x4a-atom-z34xx-series.patch
queue-4.9/hid-wacom-don-t-apply-generic-settings-to-old-devices.patch
queue-4.9/hid-sensor-hub-add-quirk-for-microchip-mm7150.patch
queue-4.9/arm-kernel-add-smc-structure-parameter.patch
queue-4.9/usb-storage-add-ignore-residue-quirk-for-initio-inic-3619.patch
queue-4.9/drm-vmwgfx-type-check-lookups-of-fence-objects.patch
queue-4.9/hid-asus-add-i2c-touchpad-support.patch
queue-4.9/nvme-simplify-stripe-quirk.patch
queue-4.9/drm-sun4i-add-compatible-strings-for-a31-a31s-display-pipelines.patch
queue-4.9/dm-verity-fec-limit-error-correction-recursion.patch
queue-4.9/drm-edid-constify-edid-quirk-list.patch
queue-4.9/s390-uaccess-get_user-should-zero-on-failure-again.patch
queue-4.9/dm-raid-fix-null-pointer-dereference-for-raid1-without-bitmap.patch
queue-4.9/random-use-chacha20-for-get_random_int-long.patch
queue-4.9/ptrace-fix-ptrace_listen-race-corrupting-task-state.patch
queue-4.9/drm-vmwgfx-fix-integer-overflow-in-vmw_surface_define_ioctl.patch
queue-4.9/pci-sort-the-list-of-devices-with-d3-delay-quirk-by-id.patch
queue-4.9/pci-add-mcfg-quirks-for-x-gene-host-controller.patch
queue-4.9/hid-i2c-hid-add-a-simple-quirk-to-fix-device-defects.patch
queue-4.9/drm-msm-adreno-move-function-declarations-to-header-file.patch
queue-4.9/s390-decompressor-fix-initrd-corruption-caused-by-bss-clear.patch
queue-4.9/pci-disable-msi-for-hisilicon-hip06-hip07-root-ports.patch
queue-4.9/mips-check-tlb-before-handle_ri_rdhwr-for-loongson-3.patch
queue-4.9/pci-add-acs-quirk-for-intel-union-point.patch
queue-4.9/asoc-intel-baytrail-add-quirk-for-lenovo-thinkpad-10.patch
queue-4.9/can-flexcan-add-quirk-flexcan_quirk_enable_eacen_rrs.patch
queue-4.9/metag-usercopy-drop-unused-macros.patch
queue-4.9/pci-expand-vpd-access-disabled-quirk-message.patch
queue-4.9/drm-i915-more-.is_mobile-cleanups-for-bdw.patch
queue-4.9/hid-multitouch-enable-the-surface-4-type-cover-pro-jp-to-report-multitouch-data.patch
queue-4.9/iio-bmg160-reset-chip-when-probing.patch
queue-4.9/orangefs-move-features-validation-to-fix-filesystem-hang.patch
queue-4.9/arm64-mm-unaligned-access-by-user-land-should-be-received-as-sigbus.patch
queue-4.9/powerpc-don-t-try-to-fix-up-misaligned-load-with-reservation-instructions.patch
queue-4.9/usb-chipidea-msm-rely-on-core-to-override-ahbburst.patch
queue-4.9/scsi-ufs-refactor-device-descriptor-reading.patch
queue-4.9/asoc-intel-bytcr_rt5640-quirks-for-insyde-devices.patch
queue-4.9/mips-lantiq-fix-missing-xbar-kernel-panic.patch
queue-4.9/metag-usercopy-zero-rest-of-buffer-from-copy_from_user.patch
queue-4.9/xfs-honor-falloc_fl_keep_size-when-punching-ends-of-files.patch
queue-4.9/hid-multitouch-enable-the-surface-3-type-cover-to-report-multitouch-data.patch
queue-4.9/scsi-ufs-issue-link-starup-2-times-if-device-isn-t-active.patch
queue-4.9/asoc-rt5670-add-missing-10ec5072-acpi-id.patch
queue-4.9/metag-usercopy-fix-alignment-error-checking.patch
queue-4.9/x86-reboot-quirks-add-asus-eeebook-x205ta-reboot-quirk.patch
queue-4.9/input-gpio_keys-add-support-for-gpio-descriptors.patch
queue-4.9/pci-xgene-fix-double-free-on-init-error.patch
queue-4.9/acpi-save-nvs-memory-for-lenovo-g50-45.patch
queue-4.9/asoc-intel-cht_bsw_rt5645-harden-acpi-device-detection.patch
queue-4.9/sata-ahci-da850-implement-a-workaround-for-the-softreset-quirk.patch
queue-4.9/reset-treeid-to-zero-on-smb2-tree_connect.patch
queue-4.9/pci-add-acs-quirk-for-qualcomm-qdf2400-and-qdf2432.patch
queue-4.9/tools-power-turbostat-decode-baytrail-cc6-and-mc6-demotion-configuration.patch
queue-4.9/arm-davinci-pm-support-da8xx-dt-platforms.patch
queue-4.9/documentation-stable-kernel-rules-fix-stable-tag-format.patch
queue-4.9/drm-mga-remove-device_is_agp-callback.patch
queue-4.9/usb-host-xhci-plat-enable-broken_ped-quirk-if-platform-requested.patch
queue-4.9/mm-mempolicy.c-fix-error-handling-in-set_mempolicy-and-mbind.patch
queue-4.9/pci-add-mcfg-quirks-for-qualcomm-qdf2432-host-controller.patch
queue-4.9/amd-xgbe-prepare-for-working-with-more-than-one-type-of-phy.patch
queue-4.9/arm-arm64-kvm-take-mmap_sem-in-stage2_unmap_vm.patch
queue-4.9/mm-page_alloc.c-fix-print-order-in-show_free_areas.patch
queue-4.9/usb-dwc3-host-pass-quirk-broken-port-ped-property-for-known-broken-revisions.patch
queue-4.9/hid-usbhid-add-quirk-for-the-futaba-tosd-5711bb-vfd.patch
queue-4.9/mmc-sdhci-msm-enable-few-quirks.patch
queue-4.9/hid-usbhid-add-quirk-for-mayflash-dragonrise-dolphinbar.patch
queue-4.9/arm-smccc-update-hvc-comment-to-describe-new-quirk-parameter.patch
queue-4.9/hid-usbhid-add-quirks-for-mayflash-dragonrise-gamecube-and-ps3-adapters.patch
queue-4.9/pci-thunder-pem-factor-out-resource-lookup.patch
queue-4.9/pci-acpi-extend-pci_mcfg_lookup-to-return-ecam-config-accessors.patch
queue-4.9/mips-c-r4k-fix-loongson-3-s-vcache-scache-waysize-calculation.patch
queue-4.9/platform-x86-asus-wmi-set-specified-xusb2pr-value-for-x550lb.patch
queue-4.9/drm-vmwgfx-avoid-calling-vzalloc-with-a-0-size-in-vmw_get_cap_3d_ioctl.patch
queue-4.9/usb-xhci-add-quirk-flag-for-broken-ped-bits.patch
queue-4.9/scsi-ufs-ensure-that-host-pa_tactivate-is-higher-than-device.patch
queue-4.9/mips-force-o32-fp64-support-on-32bit-mips64r6-kernels.patch
queue-4.9/arm-davinci-add-skeleton-for-pdata-quirks.patch
queue-4.9/usb-dwc3-gadget-delay-unmap-of-bounced-requests.patch
queue-4.9/x86-reboot-quirks-fix-typo-in-asus-eeebook-x205ta-reboot-quirk.patch
queue-4.9/mips-add-mips_cpu_ftlb-for-loongson-3a-r2.patch
queue-4.9/alsa-usb-audio-add-native-dsd-support-for-teac-501-503-dac.patch
queue-4.9/kbuild-use-cc-disable-warning-consistently-for-maybe-uninitialized.patch
queue-4.9/arm-omap2-fix-init-for-multiple-quirks-for-the-same-soc.patch
queue-4.9/pci-add-mcfg-quirks-for-hisilicon-hip05-06-07-host-controllers.patch
queue-4.9/hid-microsoft-add-surface-4-type-cover-pro-4-not-jp-versions.patch
queue-4.9/ppdev-fix-registering-same-device-name.patch
queue-4.9/pci-add-mcfg-quirks-for-cavium-thunderx-pass2.x-host-controller.patch
queue-4.9/x86-reboot-quirks-add-asus-eeebook-x205ta-w-reboot-quirk.patch
queue-4.9/acpi-sysfs-provide-quirk-mechanism-to-prevent-gpe-flooding.patch
queue-4.9/scsi-ufs-add-quirk-to-increase-host-pa_saveconfigtime.patch
queue-4.9/drm-ttm-drm-vmwgfx-relax-permission-checking-when-opening-surfaces.patch
queue-4.9/arm64-pci-add-local-struct-device-pointers.patch
queue-4.9/drm-vmwgfx-null-pointer-dereference-in-vmw_surface_define_ioctl.patch
queue-4.9/asoc-sun4i-i2s-add-quirks-to-handle-a31-compatible.patch





[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]