[PATCH v4.4+v4.6] i2c: i801: Allow ACPI SystemIO OpRegion to conflict with PCI BAR

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Upstream commit: a7ae81952cdab56a1277bd2f9ed7284c0f575120

Many Intel systems the BIOS declares a SystemIO OpRegion below the SMBus
PCI device as can be seen in ACPI DSDT table from Lenovo Yoga 900:

  Device (SBUS)
  {
      OperationRegion (SMBI, SystemIO, (SBAR << 0x05), 0x10)
      Field (SMBI, ByteAcc, NoLock, Preserve)
      {
          HSTS,   8,
          Offset (0x02),
          HCON,   8,
          HCOM,   8,
          TXSA,   8,
          DAT0,   8,
          DAT1,   8,
          HBDR,   8,
          PECR,   8,
          RXSA,   8,
          SDAT,   16
      }

There are also bunch of AML methods that that the BIOS can use to access
these fields. Most of the systems in question AML methods accessing the
SMBI OpRegion are never used.

Now, because of this SMBI OpRegion many systems fail to load the SMBus
driver with an error looking like one below:

  ACPI Warning: SystemIO range 0x0000000000003040-0x000000000000305F
       conflicts with OpRegion 0x0000000000003040-0x000000000000304F
       (\_SB.PCI0.SBUS.SMBI) (20160108/utaddress-255)
  ACPI: If an ACPI driver is available for this device, you should use
       it instead of the native driver

The reason is that this SMBI OpRegion conflicts with the PCI BAR used by
the SMBus driver.

It turns out that we can install a custom SystemIO address space handler
for the SMBus device to intercept all accesses through that OpRegion. This
allows us to share the PCI BAR with the AML code if it for some reason is
using it. We do not expect that this OpRegion handler will ever be called
but if it is we print a warning and prevent all access from the SMBus
driver itself.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=110041
Reported-by: Andy Lutomirski <luto@xxxxxxxxxx>
Reported-by: Pali Rohár <pali.rohar@xxxxxxxxx>
Suggested-by: Rafael J. Wysocki <rafael.j.wysocki@xxxxxxxxx>
Signed-off-by: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@xxxxxxxxx>
Reviewed-by: Jean Delvare <jdelvare@xxxxxxx>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@xxxxxxxxxx>
Tested-by: Pali Rohár <pali.rohar@xxxxxxxxx>
Tested-by: Jean Delvare <jdelvare@xxxxxxx>
Signed-off-by: Wolfram Sang <wsa@xxxxxxxxxxxxx>
Cc: stable@xxxxxxxxxxxxxxx
---
This is a backport of upstream commit
a7ae81952cdab56a1277bd2f9ed7284c0f575120 suitable for kernels v4.4 and
v4.6. Thanks.

 drivers/i2c/busses/i2c-i801.c |  103 ++++++++++++++++++++++++++++++++++++++----
 1 file changed, 94 insertions(+), 9 deletions(-)

--- linux-4.6.orig/drivers/i2c/busses/i2c-i801.c	2016-07-25 15:30:30.833241957 +0200
+++ linux-4.6/drivers/i2c/busses/i2c-i801.c	2016-07-25 15:41:03.086978167 +0200
@@ -244,6 +244,13 @@ struct i801_priv {
 	struct platform_device *mux_pdev;
 #endif
 	struct platform_device *tco_pdev;
+
+	/*
+	 * If set to true the host controller registers are reserved for
+	 * ACPI AML use. Protected by acpi_lock.
+	 */
+	bool acpi_reserved;
+	struct mutex acpi_lock;
 };
 
 #define FEATURE_SMBUS_PEC	(1 << 0)
@@ -714,9 +721,15 @@ static s32 i801_access(struct i2c_adapte
 {
 	int hwpec;
 	int block = 0;
-	int ret, xact = 0;
+	int ret = 0, xact = 0;
 	struct i801_priv *priv = i2c_get_adapdata(adap);
 
+	mutex_lock(&priv->acpi_lock);
+	if (priv->acpi_reserved) {
+		mutex_unlock(&priv->acpi_lock);
+		return -EBUSY;
+	}
+
 	hwpec = (priv->features & FEATURE_SMBUS_PEC) && (flags & I2C_CLIENT_PEC)
 		&& size != I2C_SMBUS_QUICK
 		&& size != I2C_SMBUS_I2C_BLOCK_DATA;
@@ -773,7 +786,8 @@ static s32 i801_access(struct i2c_adapte
 	default:
 		dev_err(&priv->pci_dev->dev, "Unsupported transaction %d\n",
 			size);
-		return -EOPNOTSUPP;
+		ret = -EOPNOTSUPP;
+		goto out;
 	}
 
 	if (hwpec)	/* enable/disable hardware PEC */
@@ -796,11 +810,11 @@ static s32 i801_access(struct i2c_adapte
 		       ~(SMBAUXCTL_CRC | SMBAUXCTL_E32B), SMBAUXCTL(priv));
 
 	if (block)
-		return ret;
+		goto out;
 	if (ret)
-		return ret;
+		goto out;
 	if ((read_write == I2C_SMBUS_WRITE) || (xact == I801_QUICK))
-		return 0;
+		goto out;
 
 	switch (xact & 0x7f) {
 	case I801_BYTE:	/* Result put in SMBHSTDAT0 */
@@ -812,7 +826,10 @@ static s32 i801_access(struct i2c_adapte
 			     (inb_p(SMBHSTDAT1(priv)) << 8);
 		break;
 	}
-	return 0;
+
+out:
+	mutex_unlock(&priv->acpi_lock);
+	return ret;
 }
 
 
@@ -1249,6 +1266,72 @@ static void i801_add_tco(struct i801_pri
 	priv->tco_pdev = pdev;
 }
 
+#ifdef CONFIG_ACPI
+static acpi_status
+i801_acpi_io_handler(u32 function, acpi_physical_address address, u32 bits,
+		     u64 *value, void *handler_context, void *region_context)
+{
+	struct i801_priv *priv = handler_context;
+	struct pci_dev *pdev = priv->pci_dev;
+	acpi_status status;
+
+	/*
+	 * Once BIOS AML code touches the OpRegion we warn and inhibit any
+	 * further access from the driver itself. This device is now owned
+	 * by the system firmware.
+	 */
+	mutex_lock(&priv->acpi_lock);
+
+	if (!priv->acpi_reserved) {
+		priv->acpi_reserved = true;
+
+		dev_warn(&pdev->dev, "BIOS is accessing SMBus registers\n");
+		dev_warn(&pdev->dev, "Driver SMBus register access inhibited\n");
+	}
+
+	if ((function & ACPI_IO_MASK) == ACPI_READ)
+		status = acpi_os_read_port(address, (u32 *)value, bits);
+	else
+		status = acpi_os_write_port(address, (u32)*value, bits);
+
+	mutex_unlock(&priv->acpi_lock);
+
+	return status;
+}
+
+static int i801_acpi_probe(struct i801_priv *priv)
+{
+	struct acpi_device *adev;
+	acpi_status status;
+
+	adev = ACPI_COMPANION(&priv->pci_dev->dev);
+	if (adev) {
+		status = acpi_install_address_space_handler(adev->handle,
+				ACPI_ADR_SPACE_SYSTEM_IO, i801_acpi_io_handler,
+				NULL, priv);
+		if (ACPI_SUCCESS(status))
+			return 0;
+	}
+
+	return acpi_check_resource_conflict(&priv->pci_dev->resource[SMBBAR]);
+}
+
+static void i801_acpi_remove(struct i801_priv *priv)
+{
+	struct acpi_device *adev;
+
+	adev = ACPI_COMPANION(&priv->pci_dev->dev);
+	if (!adev)
+		return;
+
+	acpi_remove_address_space_handler(adev->handle,
+		ACPI_ADR_SPACE_SYSTEM_IO, i801_acpi_io_handler);
+}
+#else
+static inline int i801_acpi_probe(struct i801_priv *priv) { return 0; }
+static inline void i801_acpi_remove(struct i801_priv *priv) { }
+#endif
+
 static int i801_probe(struct pci_dev *dev, const struct pci_device_id *id)
 {
 	unsigned char temp;
@@ -1266,6 +1349,7 @@ static int i801_probe(struct pci_dev *de
 	priv->adapter.dev.parent = &dev->dev;
 	ACPI_COMPANION_SET(&priv->adapter.dev, ACPI_COMPANION(&dev->dev));
 	priv->adapter.retries = 3;
+	mutex_init(&priv->acpi_lock);
 
 	priv->pci_dev = dev;
 	switch (dev->device) {
@@ -1328,10 +1412,8 @@ static int i801_probe(struct pci_dev *de
 		return -ENODEV;
 	}
 
-	err = acpi_check_resource_conflict(&dev->resource[SMBBAR]);
-	if (err) {
+	if (i801_acpi_probe(priv))
 		return -ENODEV;
-	}
 
 	err = pcim_iomap_regions(dev, 1 << SMBBAR,
 				 dev_driver_string(&dev->dev));
@@ -1340,6 +1422,7 @@ static int i801_probe(struct pci_dev *de
 			"Failed to request SMBus region 0x%lx-0x%Lx\n",
 			priv->smba,
 			(unsigned long long)pci_resource_end(dev, SMBBAR));
+		i801_acpi_remove(priv);
 		return err;
 	}
 
@@ -1404,6 +1487,7 @@ static int i801_probe(struct pci_dev *de
 	err = i2c_add_adapter(&priv->adapter);
 	if (err) {
 		dev_err(&dev->dev, "Failed to add SMBus adapter\n");
+		i801_acpi_remove(priv);
 		return err;
 	}
 
@@ -1422,6 +1506,7 @@ static void i801_remove(struct pci_dev *
 
 	i801_del_mux(priv);
 	i2c_del_adapter(&priv->adapter);
+	i801_acpi_remove(priv);
 	pci_write_config_byte(dev, SMBHSTCFG, priv->original_hstcfg);
 
 	platform_device_unregister(priv->tco_pdev);


-- 
Jean Delvare
SUSE L3 Support
--
To unsubscribe from this list: send the line "unsubscribe stable" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]