Quoting Eric Anholt (2016-02-15 19:03:57) > Our dividers weren't being set successfully because CM_PASSWORD wasn't > included in the register write. It looks easier to just compute the > divider to write ourselves than to update clk-divider for the ability > to OR in some arbitrary bits on write. > > Fixes about half of the video modes on my HDMI monitor (everything > except 720x400). > > Cc: stable@xxxxxxxxxxxxxxx > Signed-off-by: Eric Anholt <eric@xxxxxxxxxx> Applied to clk-next. Regards, Mike > --- > drivers/clk/bcm/clk-bcm2835.c | 12 +++++++----- > 1 file changed, 7 insertions(+), 5 deletions(-) > > diff --git a/drivers/clk/bcm/clk-bcm2835.c b/drivers/clk/bcm/clk-bcm2835.c > index 015e687..9f4df8f 100644 > --- a/drivers/clk/bcm/clk-bcm2835.c > +++ b/drivers/clk/bcm/clk-bcm2835.c > @@ -1107,13 +1107,15 @@ static int bcm2835_pll_divider_set_rate(struct clk_hw *hw, > struct bcm2835_pll_divider *divider = bcm2835_pll_divider_from_hw(hw); > struct bcm2835_cprman *cprman = divider->cprman; > const struct bcm2835_pll_divider_data *data = divider->data; > - u32 cm; > - int ret; > + u32 cm, div, max_div = 1 << A2W_PLL_DIV_BITS; > > - ret = clk_divider_ops.set_rate(hw, rate, parent_rate); > - if (ret) > - return ret; > + div = DIV_ROUND_UP_ULL(parent_rate, rate); > + > + div = min(div, max_div); > + if (div == max_div) > + div = 0; > > + cprman_write(cprman, data->a2w_reg, div); > cm = cprman_read(cprman, data->cm_reg); > cprman_write(cprman, data->cm_reg, cm | data->load_mask); > cprman_write(cprman, data->cm_reg, cm & ~data->load_mask); > -- > 2.7.0 > -- To unsubscribe from this list: send the line "unsubscribe stable" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html