Our dividers weren't being set successfully because CM_PASSWORD wasn't included in the register write. It looks easier to just compute the divider to write ourselves than to update clk-divider for the ability to OR in some arbitrary bits on write. Fixes about half of the video modes on my HDMI monitor (everything except 720x400). Cc: stable@xxxxxxxxxxxxxxx Signed-off-by: Eric Anholt <eric@xxxxxxxxxx> --- drivers/clk/bcm/clk-bcm2835.c | 12 +++++++----- 1 file changed, 7 insertions(+), 5 deletions(-) diff --git a/drivers/clk/bcm/clk-bcm2835.c b/drivers/clk/bcm/clk-bcm2835.c index 015e687..9f4df8f 100644 --- a/drivers/clk/bcm/clk-bcm2835.c +++ b/drivers/clk/bcm/clk-bcm2835.c @@ -1107,13 +1107,15 @@ static int bcm2835_pll_divider_set_rate(struct clk_hw *hw, struct bcm2835_pll_divider *divider = bcm2835_pll_divider_from_hw(hw); struct bcm2835_cprman *cprman = divider->cprman; const struct bcm2835_pll_divider_data *data = divider->data; - u32 cm; - int ret; + u32 cm, div, max_div = 1 << A2W_PLL_DIV_BITS; - ret = clk_divider_ops.set_rate(hw, rate, parent_rate); - if (ret) - return ret; + div = DIV_ROUND_UP_ULL(parent_rate, rate); + + div = min(div, max_div); + if (div == max_div) + div = 0; + cprman_write(cprman, data->a2w_reg, div); cm = cprman_read(cprman, data->cm_reg); cprman_write(cprman, data->cm_reg, cm | data->load_mask); cprman_write(cprman, data->cm_reg, cm & ~data->load_mask); -- 2.7.0 -- To unsubscribe from this list: send the line "unsubscribe stable" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html