The patch below does not apply to the 3.9-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable@xxxxxxxxxxxxxxx>.
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
>From 731da21b7b205efb388481f7a9731c4c1ca3b48c Mon Sep 17 00:00:00 2001
From: Alex Deucher <alexander.deucher@xxxxxxx>
Date: Mon, 13 May 2013 11:35:26 -0400
Subject: [PATCH] drm/radeon/dce2: use 10khz units for audio dto calculation
Avoids overflows on DCE2.x devices. Also clarify the calculation
on other asics.
Signed-off-by: Alex Deucher <alexander.deucher@xxxxxxx>
Cc: stable@xxxxxxxxxxxxxxx
diff --git a/drivers/gpu/drm/radeon/evergreen_hdmi.c b/drivers/gpu/drm/radeon/evergreen_hdmi.c
index b4ab8ce..ed7c8a7 100644
--- a/drivers/gpu/drm/radeon/evergreen_hdmi.c
+++ b/drivers/gpu/drm/radeon/evergreen_hdmi.c
@@ -154,19 +154,18 @@ static void evergreen_audio_set_dto(struct drm_encoder *encoder, u32 clock)
struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
struct radeon_encoder_atom_dig *dig = radeon_encoder->enc_priv;
struct radeon_crtc *radeon_crtc = to_radeon_crtc(encoder->crtc);
- u32 base_rate = 48000;
+ u32 base_rate = 24000;
if (!dig || !dig->afmt)
return;
- /* XXX: properly calculate this */
/* XXX two dtos; generally use dto0 for hdmi */
/* Express [24MHz / target pixel clock] as an exact rational
* number (coefficient of two integer numbers. DCCG_AUDIO_DTOx_PHASE
* is the numerator, DCCG_AUDIO_DTOx_MODULE is the denominator
*/
- WREG32(DCCG_AUDIO_DTO0_PHASE, (base_rate*50) & 0xffffff);
- WREG32(DCCG_AUDIO_DTO0_MODULE, (clock*100) & 0xffffff);
+ WREG32(DCCG_AUDIO_DTO0_PHASE, base_rate * 100);
+ WREG32(DCCG_AUDIO_DTO0_MODULE, clock * 100);
WREG32(DCCG_AUDIO_DTO_SOURCE, DCCG_AUDIO_DTO0_SOURCE_SEL(radeon_crtc->crtc_id));
}
diff --git a/drivers/gpu/drm/radeon/r600_hdmi.c b/drivers/gpu/drm/radeon/r600_hdmi.c
index 47f180a..456750a 100644
--- a/drivers/gpu/drm/radeon/r600_hdmi.c
+++ b/drivers/gpu/drm/radeon/r600_hdmi.c
@@ -232,7 +232,7 @@ void r600_audio_set_dto(struct drm_encoder *encoder, u32 clock)
struct radeon_device *rdev = dev->dev_private;
struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
struct radeon_encoder_atom_dig *dig = radeon_encoder->enc_priv;
- u32 base_rate = 48000;
+ u32 base_rate = 24000;
if (!dig || !dig->afmt)
return;
@@ -240,7 +240,6 @@ void r600_audio_set_dto(struct drm_encoder *encoder, u32 clock)
/* there are two DTOs selected by DCCG_AUDIO_DTO_SELECT.
* doesn't matter which one you use. Just use the first one.
*/
- /* XXX: properly calculate this */
/* XXX two dtos; generally use dto0 for hdmi */
/* Express [24MHz / target pixel clock] as an exact rational
* number (coefficient of two integer numbers. DCCG_AUDIO_DTOx_PHASE
@@ -250,13 +249,13 @@ void r600_audio_set_dto(struct drm_encoder *encoder, u32 clock)
/* according to the reg specs, this should DCE3.2 only, but in
* practice it seems to cover DCE3.0 as well.
*/
- WREG32(DCCG_AUDIO_DTO0_PHASE, base_rate * 50);
+ WREG32(DCCG_AUDIO_DTO0_PHASE, base_rate * 100);
WREG32(DCCG_AUDIO_DTO0_MODULE, clock * 100);
WREG32(DCCG_AUDIO_DTO_SELECT, 0); /* select DTO0 */
} else {
/* according to the reg specs, this should be DCE2.0 and DCE3.0 */
- WREG32(AUDIO_DTO, AUDIO_DTO_PHASE(base_rate * 50) |
- AUDIO_DTO_MODULE(clock * 100));
+ WREG32(AUDIO_DTO, AUDIO_DTO_PHASE(base_rate / 10) |
+ AUDIO_DTO_MODULE(clock / 10));
}
}
--
To unsubscribe from this list: send the line "unsubscribe stable" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html