This is a note to let you know that I've just added the patch titled
phy: qcom-qmp: qserdes-txrx: Add missing registers offsets
to the 6.9-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary
The filename of the patch is:
phy-qcom-qmp-qserdes-txrx-add-missing-registers-offs.patch
and it can be found in the queue-6.9 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@xxxxxxxxxxxxxxx> know about it.
commit d4b7e8b74638fe4be3d8fcbab66f8b2fa557f63f
Author: Abel Vesa <abel.vesa@xxxxxxxxxx>
Date: Mon May 27 10:20:35 2024 +0300
phy: qcom-qmp: qserdes-txrx: Add missing registers offsets
[ Upstream commit 5314e84c33e7ad61df5203df540626ac59f9dcd9 ]
Currently, the x1e80100 uses pure V6 register offsets for DP part of the
combo PHY. This hasn't been an issue because external DP is not yet
enabled on any of the boards yet. But in order to enabled it, all these
new V6 N4 register offsets are needed. So add them.
Fixes: 762c3565f3c8 ("phy: qcom-qmp: qserdes-txrx: Add V6 N4 register offsets")
Co-developed-by: Kuogee Hsieh <quic_khsieh@xxxxxxxxxxx>
Signed-off-by: Kuogee Hsieh <quic_khsieh@xxxxxxxxxxx>
Signed-off-by: Abel Vesa <abel.vesa@xxxxxxxxxx>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
Link: https://lore.kernel.org/r/20240527-x1e80100-phy-qualcomm-combo-fix-dp-v1-1-be8a0b882117@xxxxxxxxxx
Signed-off-by: Vinod Koul <vkoul@xxxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-txrx-v6_n4.h b/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-txrx-v6_n4.h
index a814ad11af071..d37cc0d4fd365 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-txrx-v6_n4.h
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-txrx-v6_n4.h
@@ -6,11 +6,24 @@
#ifndef QCOM_PHY_QMP_QSERDES_TXRX_V6_N4_H_
#define QCOM_PHY_QMP_QSERDES_TXRX_V6_N4_H_
+#define QSERDES_V6_N4_TX_CLKBUF_ENABLE 0x08
+#define QSERDES_V6_N4_TX_TX_EMP_POST1_LVL 0x0c
+#define QSERDES_V6_N4_TX_TX_DRV_LVL 0x14
+#define QSERDES_V6_N4_TX_RESET_TSYNC_EN 0x1c
+#define QSERDES_V6_N4_TX_PRE_STALL_LDO_BOOST_EN 0x20
#define QSERDES_V6_N4_TX_RES_CODE_LANE_OFFSET_TX 0x30
#define QSERDES_V6_N4_TX_RES_CODE_LANE_OFFSET_RX 0x34
+#define QSERDES_V6_N4_TX_TRANSCEIVER_BIAS_EN 0x48
+#define QSERDES_V6_N4_TX_HIGHZ_DRVR_EN 0x4c
+#define QSERDES_V6_N4_TX_TX_POL_INV 0x50
+#define QSERDES_V6_N4_TX_PARRATE_REC_DETECT_IDLE_EN 0x54
#define QSERDES_V6_N4_TX_LANE_MODE_1 0x78
#define QSERDES_V6_N4_TX_LANE_MODE_2 0x7c
#define QSERDES_V6_N4_TX_LANE_MODE_3 0x80
+#define QSERDES_V6_N4_TX_TRAN_DRVR_EMP_EN 0xac
+#define QSERDES_V6_N4_TX_TX_BAND 0xd8
+#define QSERDES_V6_N4_TX_INTERFACE_SELECT 0xe4
+#define QSERDES_V6_N4_TX_VMODE_CTRL1 0xb0
#define QSERDES_V6_N4_RX_UCDR_FO_GAIN_RATE2 0x8
#define QSERDES_V6_N4_RX_UCDR_SO_GAIN_RATE2 0x18
