This is a note to let you know that I've just added the patch titled arm64: dts: qcom: acer-aspire1: Correct audio codec definition to the 6.7-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary The filename of the patch is: arm64-dts-qcom-acer-aspire1-correct-audio-codec-defi.patch and it can be found in the queue-6.7 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable@xxxxxxxxxxxxxxx> know about it. commit a8eb37975638c0758b8853a4659b3a3121c56886 Author: Nikita Travkin <nikita@xxxxxxx> Date: Tue Dec 5 16:48:11 2023 +0500 arm64: dts: qcom: acer-aspire1: Correct audio codec definition [ Upstream commit feec9f0add432a867f23e29afcd2f7088889b8e2 ] When initially added, a mistake was made in the definition of the codec. Despite the fact that the DMIC line is connected on the side of the codec chip, and relevant passive components, including 0-ohm resistors connecting the dmics, are present, the dmic line is still cut in another place on the board, which was overlooked. Correct this by replacing the dmic configuration with a comment describing this hardware detail. While at it, also add missing regulators definitions. This is not a functional change as all the relevant regulators were already added via the other rail supplies. Fixes: 4a9f8f8f2ada ("arm64: dts: qcom: Add Acer Aspire 1") Signed-off-by: Nikita Travkin <nikita@xxxxxxx> Link: https://lore.kernel.org/r/20231205-aspire1-sound-v2-2-443b7ac0a06f@xxxxxxx Signed-off-by: Bjorn Andersson <andersson@xxxxxxxxxx> Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx> diff --git a/arch/arm64/boot/dts/qcom/sc7180-acer-aspire1.dts b/arch/arm64/boot/dts/qcom/sc7180-acer-aspire1.dts index dbb48934d499..3342cb048038 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-acer-aspire1.dts +++ b/arch/arm64/boot/dts/qcom/sc7180-acer-aspire1.dts @@ -209,9 +209,22 @@ alc5682: codec@1a { AVDD-supply = <&vreg_l15a_1p8>; MICVDD-supply = <®_codec_3p3>; VBAT-supply = <®_codec_3p3>; + DBVDD-supply = <&vreg_l15a_1p8>; + LDO1-IN-supply = <&vreg_l15a_1p8>; + + /* + * NOTE: The board has a path from this codec to the + * DMIC microphones in the lid, however some of the option + * resistors are absent and the microphones are connected + * to the SoC instead. + * + * If the resistors were to be changed by the user to + * connect the codec, the following could be used: + * + * realtek,dmic1-data-pin = <1>; + * realtek,dmic1-clk-pin = <1>; + */ - realtek,dmic1-data-pin = <1>; - realtek,dmic1-clk-pin = <1>; realtek,jd-src = <1>; }; };