This is a note to let you know that I've just added the patch titled
arm64: dt: imx93: tqma9352-mba93xxla: Fix LPUART2 pad config
to the 6.6-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary
The filename of the patch is:
arm64-dt-imx93-tqma9352-mba93xxla-fix-lpuart2-pad-co.patch
and it can be found in the queue-6.6 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@xxxxxxxxxxxxxxx> know about it.
commit 4a3c1ac74da0210df8dedac4fb822474697e2170
Author: Alexander Stein <alexander.stein@xxxxxxxxxxxxxxx>
Date: Thu Oct 19 08:32:17 2023 +0200
arm64: dt: imx93: tqma9352-mba93xxla: Fix LPUART2 pad config
[ Upstream commit 2bfba37b3d90d6d2d499d5b0dfe99c05c38b1b54 ]
LPUART2_RTS# has an external pull-down, so do not enable the internal
pull-up at the same time, use a pull-down instead.
Fixes: c982ecfa7992a ("arm64: dts: freescale: add initial device tree for MBa93xxLA SBC board")
Signed-off-by: Alexander Stein <alexander.stein@xxxxxxxxxxxxxxx>
Signed-off-by: Shawn Guo <shawnguo@xxxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
diff --git a/arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxla.dts b/arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxla.dts
index f06139bdff97e..3c5c67ebee5d3 100644
--- a/arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxla.dts
+++ b/arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxla.dts
@@ -577,7 +577,7 @@ pinctrl_uart2: uart2grp {
fsl,pins = <
MX93_PAD_UART2_TXD__LPUART2_TX 0x31e
MX93_PAD_UART2_RXD__LPUART2_RX 0x31e
- MX93_PAD_SAI1_TXD0__LPUART2_RTS_B 0x31e
+ MX93_PAD_SAI1_TXD0__LPUART2_RTS_B 0x51e
>;
};
