Patch "arm64: dts: imx8-ss-dma: assign default clock rate for lpuarts" has been added to the 5.15-stable tree

[Sasha Levin <sashal@xxxxxxxxxx>]

This is a note to let you know that I've just added the patch titled

    arm64: dts: imx8-ss-dma: assign default clock rate for lpuarts

to the 5.15-stable tree which can be found at:
    http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary

The filename of the patch is:
     arm64-dts-imx8-ss-dma-assign-default-clock-rate-for-.patch
and it can be found in the queue-5.15 subdirectory.

If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@xxxxxxxxxxxxxxx> know about it.



commit 0efbe0b5a1623f1732b9b2ceb396f1cf9b18dab1
Author: Shenwei Wang <shenwei.wang@xxxxxxx>
Date:   Fri May 26 10:38:54 2023 -0500

    arm64: dts: imx8-ss-dma: assign default clock rate for lpuarts
    
    [ Upstream commit ca50d7765587fe0a8351a6e8d9742cfd4811d925 ]
    
    Add the assigned-clocks and assigned-clock-rates properties for the
    LPUARTx nodes. Without these properties, the default clock rate
    used would be 0, which can cause the UART ports to fail when open.
    
    Fixes: 35f4e9d7530f ("arm64: dts: imx8: split adma ss into dma and audio ss")
    Signed-off-by: Shenwei Wang <shenwei.wang@xxxxxxx>
    Reviewed-by: Fabio Estevam <festevam@xxxxxxxxx>
    Signed-off-by: Shawn Guo <shawnguo@xxxxxxxxxx>
    Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>

diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi b/arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi
index 960a802b8b6ee..c33892711138f 100644
--- a/arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi
@@ -26,6 +26,8 @@ lpuart0: serial@5a060000 {
 		clocks = <&uart0_lpcg IMX_LPCG_CLK_4>,
 			 <&uart0_lpcg IMX_LPCG_CLK_0>;
 		clock-names = "ipg", "baud";
+		assigned-clocks = <&clk IMX_SC_R_UART_0 IMX_SC_PM_CLK_PER>;
+		assigned-clock-rates = <80000000>;
 		power-domains = <&pd IMX_SC_R_UART_0>;
 		status = "disabled";
 	};
@@ -36,6 +38,8 @@ lpuart1: serial@5a070000 {
 		clocks = <&uart1_lpcg IMX_LPCG_CLK_4>,
 			 <&uart1_lpcg IMX_LPCG_CLK_0>;
 		clock-names = "ipg", "baud";
+		assigned-clocks = <&clk IMX_SC_R_UART_1 IMX_SC_PM_CLK_PER>;
+		assigned-clock-rates = <80000000>;
 		power-domains = <&pd IMX_SC_R_UART_1>;
 		status = "disabled";
 	};
@@ -46,6 +50,8 @@ lpuart2: serial@5a080000 {
 		clocks = <&uart2_lpcg IMX_LPCG_CLK_4>,
 			 <&uart2_lpcg IMX_LPCG_CLK_0>;
 		clock-names = "ipg", "baud";
+		assigned-clocks = <&clk IMX_SC_R_UART_2 IMX_SC_PM_CLK_PER>;
+		assigned-clock-rates = <80000000>;
 		power-domains = <&pd IMX_SC_R_UART_2>;
 		status = "disabled";
 	};
@@ -56,6 +62,8 @@ lpuart3: serial@5a090000 {
 		clocks = <&uart3_lpcg IMX_LPCG_CLK_4>,
 			 <&uart3_lpcg IMX_LPCG_CLK_0>;
 		clock-names = "ipg", "baud";
+		assigned-clocks = <&clk IMX_SC_R_UART_3 IMX_SC_PM_CLK_PER>;
+		assigned-clock-rates = <80000000>;
 		power-domains = <&pd IMX_SC_R_UART_3>;
 		status = "disabled";
 	};