This is a note to let you know that I've just added the patch titled
ARM: dts: imx7d-sdb: config the max pressure for tsc2046
to the 5.15-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary
The filename of the patch is:
arm-dts-imx7d-sdb-config-the-max-pressure-for-tsc204.patch
and it can be found in the queue-5.15 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@xxxxxxxxxxxxxxx> know about it.
commit 3ac783a34a8126c75f97ca84c053964b7270c54c
Author: Haibo Chen <haibo.chen@xxxxxxx>
Date: Mon Jul 25 18:16:22 2022 +0800
ARM: dts: imx7d-sdb: config the max pressure for tsc2046
[ Upstream commit e7c4ebe2f9cd68588eb24ba4ed122e696e2d5272 ]
Use the general touchscreen method to config the max pressure for
touch tsc2046(data sheet suggest 8 bit pressure), otherwise, for
ABS_PRESSURE, when config the same max and min value, weston will
meet the following issue,
[17:19:39.183] event1 - ADS7846 Touchscreen: is tagged by udev as: Touchscreen
[17:19:39.183] event1 - ADS7846 Touchscreen: kernel bug: device has min == max on ABS_PRESSURE
[17:19:39.183] event1 - ADS7846 Touchscreen: was rejected
[17:19:39.183] event1 - not using input device '/dev/input/event1'
This will then cause the APP weston-touch-calibrator can't list touch devices.
root@imx6ul7d:~# weston-touch-calibrator
could not load cursor 'dnd-move'
could not load cursor 'dnd-copy'
could not load cursor 'dnd-none'
No devices listed.
And accroding to binding Doc, "ti,x-max", "ti,y-max", "ti,pressure-max"
belong to the deprecated properties, so remove them. Also for "ti,x-min",
"ti,y-min", "ti,x-plate-ohms", the value set in dts equal to the default
value in driver, so are redundant, also remove here.
Signed-off-by: Haibo Chen <haibo.chen@xxxxxxx>
Signed-off-by: Shawn Guo <shawnguo@xxxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
diff --git a/arch/arm/boot/dts/imx7d-sdb.dts b/arch/arm/boot/dts/imx7d-sdb.dts
index e5f1bdbe7992..4e1a6cde90fe 100644
--- a/arch/arm/boot/dts/imx7d-sdb.dts
+++ b/arch/arm/boot/dts/imx7d-sdb.dts
@@ -206,12 +206,7 @@
interrupt-parent = <&gpio2>;
interrupts = <29 0>;
pendown-gpio = <&gpio2 29 GPIO_ACTIVE_HIGH>;
- ti,x-min = /bits/ 16 <0>;
- ti,x-max = /bits/ 16 <0>;
- ti,y-min = /bits/ 16 <0>;
- ti,y-max = /bits/ 16 <0>;
- ti,pressure-max = /bits/ 16 <0>;
- ti,x-plate-ohms = /bits/ 16 <400>;
+ touchscreen-max-pressure = <255>;
wakeup-source;
};
};
