On 12/31/20 1:39 PM, roee klinger wrote: > 2020/12/31 20:33:49 kid1| Logfile: opening log daemon:/var/log/squid/access.log > 2020/12/31 20:33:49 kid1| Logfile Daemon: opening log /var/log/squid/access.log > 2020/12/31 20:33:49 kid1| Store logging disabled > 2020/12/31 20:33:57 kid1| logfileRotate: daemon:/var/log/squid/access.log > 2020/12/31 20:33:57 kid1| logfileRotate: daemon:/var/log/squid/access.log > 2020/12/31 20:33:57 kid1| Logfile: opening log daemon:/var/log/squid/access.log > 2020/12/31 20:33:57 kid1| Logfile Daemon: opening log /var/log/squid/access.log > 2020/12/31 20:33:57 kid1| Store logging disabled The second set of the "opening log" lines at 20:33:57 concern me -- why would somebody start opening those files when you are asking Squid to rotate the logs. However, this could be a red herring. Do you get the same kind of output when you send USR1 signal to the process identifier in the PID file (instead of running "squid -k rotate")? > Any tips? I have not looked at v4.6 code, but I do not see anything in the more recent code that would make the visible effects of access.log rotation conditional except setting logfile_rotate to zero. I also do not see any obviously relevant changes in v4 change.log (although there was one access-logging bug fixed). A few thing could go wrong. If you do not get better advice, I can suggest the following: * If you are a developer, I would recommend attaching a debugger to the logging daemon process to (a) make sure it gets the rotation command from Squid and (b) to understand why it ignores that command. * If you are a sysadmin, you may be able to attach strace to the logging daemon process and share its output. This is best done without user traffic going through Squid to avoid accidentally sharing user info. Here are rough steps: 1. Attach strace to the running daemon process (-p). Configure strace to log at least 100 bytes of system call data (-s 100). Tell strace to write the output into a file. 2. Rotate. 3. Wait a few seconds. 4. Stop strace. Compress and share a link to its output file. Cheers, Alex. _______________________________________________ squid-users mailing list squid-users@xxxxxxxxxxxxxxxxxxxxx http://lists.squid-cache.org/listinfo/squid-users
