Hi yeah from the rpms. I found the variables to lengthen the timeout period. But I got in the strange situation where the pid file was still there (shutdown took longer than the timeout). and the scripts still thought it was running, so stop would fail as it does a check first. do we need to do a check first on shutdown ?? A On 29 November 2015 at 09:14, Eliezer Croitoru <eliezer@xxxxxxxxxxxx> wrote: > What script are you using? > If it's from my RPMs I might be able to patch it and make sure it will work > better. > > Eliezer > > On 27/11/2015 08:09, Alex Samad wrote: >> >> Hi >> >> I have a rather long list of blocked address in my squid config. >> and the default start stop timeout values are a bit short for my setup. >> >> when i did stop it failed because the time to parse the config took to >> long. any reason it needs to parse to shutdown ? >> >> that left the pid file behind, which causes stop to fail again as >> squid -k check -f /etc/squid/squid.conf >> >> fails no running process >> >> Alex >> _______________________________________________ >> squid-users mailing list >> squid-users@xxxxxxxxxxxxxxxxxxxxx >> http://lists.squid-cache.org/listinfo/squid-users >> > > _______________________________________________ > squid-users mailing list > squid-users@xxxxxxxxxxxxxxxxxxxxx > http://lists.squid-cache.org/listinfo/squid-users _______________________________________________ squid-users mailing list squid-users@xxxxxxxxxxxxxxxxxxxxx http://lists.squid-cache.org/listinfo/squid-users
