Your test is broken. " curl http://www.ciudad.com.ar -x http://SQUIDIP:80 " tells curl to fetch from a *forward-proxy* listening at SQUIDIP:80. The HTTP syntax for port 80 (web server / reverse-proxy) and for port 3128 (forward-proxy) is significantly different in ways which open security vulnerability CVE-2009-0801 if handled incorrectly. Squid since 3.2 perform additional security checks on intercepted port 80 syntax traffic and if those fail (like they will on your test) relays *transparently* to the same destination server IP:port reported by the kernel NAT system that the client was connecting to. Squid 3.1 and older did not actually act transparently when configured with "transparent" or "intercept" options. They appeared to work while logging bogus details about the server. Amos On 24/07/2014 9:07 a.m., Roberto O. Fernández Crisial wrote: > Same configuration with Squid-3.2.13 and the same problem: > > connect(11, {sa_family=AF_INET, sin_port=htons(80), > sin_addr=inet_addr("SQUIDIP")}, 16) = -1 EINPROGRESS (Operation now in > progress) > > Something related to configure line? > > On Wed, Jul 23, 2014 at 5:54 PM, Roberto O. Fernández Crisial wrote: >> Nicolas, >> >> I do not use client and server on the same machine. >> >> The Squid 3.1.10 has been installed via "yum". The Squid 3.4.6 has >> been compiled using: "./configure --prefix=/usr/local/squid-3.4.6 >> -enable-icap-client --enable-ssl --enable-ssl-crtd >> --with-default-user=squid --enable-ltdl-convenience >> --enable-linux-netfilter--enable-snmp --enable-esi >> --with-filedescriptors=16384 --with-dl --with-openssl --with-pthreads >> --enable-arp-acl --enable-follow-x-forwarded-for" >> >> I'm going to try with Squid 3.2.16 and let you all know. >> >> Best, >> >> On Wed, Jul 23, 2014 at 5:15 PM, Nicolás wrote: >>> Hi Roberto, >>> >>> El 23/07/2014 20:54, Roberto O. Fernández Crisial escribió: >>> >>>> Hi guys, >>>> >>>> I hope you're doing fine. I'm trying to intercept HTTP requests on >>>> Squid 3.4.6 but I'm going crazy. Is there any http_port parameter >>>> change between 3.1.10 and 3.4.6? >>>> >>>> I have 3.1.10 working fine, here are the examples: >>>> >>>> IPTABLES CONFIGURATION (Global config) >>>> -A PREROUTING -s 10.1.0.0/16 -p tcp -m tcp --dport 80 -j DNAT >>>> --to-destination SQUIDIP:3129 >>>> >>>> >>>> With Squid 3.1.10 >>>> >>>> SQUID CONF >>>> http_port 3128 transparent >>>> http_port 3129 intercept >>>> >>>> START SQUID 3.1.10 >>>> 2014/07/23 16:06:38| Accepting intercepted HTTP connections at >>>> 0.0.0.0:3128, FD 12. >>>> 2014/07/23 16:06:38| Accepting intercepted HTTP connections at >>>> 0.0.0.0:3129, FD 13. >>>> >>>> CURL >>>> curl http://www.ciudad.com.ar -x http://SQUIDIP:80 >>>> >>>> STRACE >>>> accept(13, {sa_family=AF_INET, sin_port=htons(34330), >>>> sin_addr=inet_addr("10.1.100.158")}, [16]) = 9 >>>> getsockname(9, {sa_family=AF_INET, sin_port=htons(3129), >>>> sin_addr=inet_addr("SQUIDIP")}, [16]) = 0 >>>> connect(15, {sa_family=AF_INET6, sin6_port=htons(80), >>>> inet_pton(AF_INET6, "::ffff:200.42.143.77", &sin6_addr), >>>> sin6_flowinfo=0, sin6_scope_id=0}, 28) = -1 EINPROGRESS (Operation now >>>> in progress) >>>> >>>> STOP SQUID 3.1.10 >>>> >>>> >>>> Now with Squid 3.4.6 >>>> >>>> SQUID CONF >>>> http_port 3128 >>>> http_port 3129 intercept >>>> >>>> START SQUID 3.4.6 >>>> 2014/07/23 16:06:05| Accepting HTTP Socket connections at >>>> local=[::]:3128 remote=[::] FD 19 flags=9 >>>> 2014/07/23 16:06:05| Accepting NAT intercepted HTTP Socket connections >>>> at local=[::]:3129 remote=[::] FD 20 flags=41 >>>> >>>> CURL >>>> curl http://www.ciudad.com.ar -x http://SQUIDIP:80 >>>> >>>> STRACE >>>> accept(20, {sa_family=AF_INET6, sin6_port=htons(34428), >>>> inet_pton(AF_INET6, "::ffff:10.1.100.158", &sin6_addr), >>>> sin6_flowinfo=0, sin6_scope_id=0}, [28]) = 8 >>>> getsockname(8, {sa_family=AF_INET6, sin6_port=htons(3129), >>>> inet_pton(AF_INET6, "::ffff:SQUIDIP", &sin6_addr), sin6_flowinfo=0, >>>> sin6_scope_id=0}, [28]) = 0 >>>> connect(10, {sa_family=AF_INET, sin_port=htons(80), >>>> sin_addr=inet_addr("SQUIDIP")}, 16) = -1 EINPROGRESS (Operation now in >>>> progress) >>>> >>>> STOP SQUID 3.4.6 >>>> >>>> >>>> I see in Squid 3.4.6 the squid process tries to conect to itself on >>>> port 80. With Squid 3.1.10 works fine (connets to reomte server). Any >>>> ideas? >>>> >>>> Thank you all in advance. >>>> >>>> Best, >>> >>> >>> In my case I'm running v. 3.3.8, but I'm having the same issue than you. The >>> packets are correctly DNATed from the client to the squid box, but once >>> there, squid3 seems to try to connect to itself several times and keeps >>> adding its 'visible_hostname' to the Via header, causing a forwarding loop. >>> >>> I've followed these instructions to achieve it: >>> http://wiki.squid-cache.org/ConfigExamples/Intercept/AtSource >>> >>> Recently, the document got updated adding a new iptables OUTPUT rule, you >>> could try and see if it works to you (it didn't work to me, though). >>> >>> Regards, >>> >>> Nicolás >>>
