Hi, I'm using Microtik 1100 AH X2 Router, here is my Basic Data from your latest script. http://pastebin.com/GHkD5yYx Thanks, Ganesh J On Wed, Jul 9, 2014 at 1:08 AM, Eliezer Croitoru <eliezer@xxxxxxxxxxxx> wrote: > What router are you using?? > > Eliezer > > P.S. I will be at the squid irc channel for about couple hours > http://webchat.freenode.net/?channels=squid > > > On 07/08/2014 10:19 PM, Info OoDoO wrote: >> >> Configured Squid 3.4.6 again with all the options, still facing the same >> issue. >> >> Thanks, >> Ganesh J >> >> >> On Tue, Jul 8, 2014 at 11:55 PM, Nyamul Hassan <nyamul@xxxxxxxxx> wrote: >>> >>> We were in the same problem just a few days ago. Can you recompile and >>> check? >>> >>> Also, since you are compiling, then can you also try the latest stable >>> version 3.4.6? >>> >>> Regards >>> HASSAN >>> >>> >>> On Wed, Jul 9, 2014 at 12:24 AM, Info OoDoO <info@xxxxxxxxxxx> wrote: >>>> >>>> Sorry, I installed it recently and it was not there when i compiled >>>> and configured squid from source. >>>> >>>> Thanks, >>>> Ganesh J >>>> >>>> >>>> On Tue, Jul 8, 2014 at 11:52 PM, Info OoDoO <info@xxxxxxxxxxx> wrote: >>>>> >>>>> Yes.. it is installed.. >>>>> >>>>> libcap-devel.x86_64 2.16-5.5.el6 @base >>>>> >>>>> Thanks, >>>>> Ganesh J >>>>> >>>>> >>>>> On Tue, Jul 8, 2014 at 11:49 PM, Nyamul Hassan <nyamul@xxxxxxxxx> >>>>> wrote: >>>>>>>> >>>>>>>> For your kind attention, i have not installed Squid 3.1.10 from YUM. >>>>>>>> I >>>>>>>> have Compiled and installed from the source with the following >>>>>>>> options. >>>>>>>> >>>>>>>> http://pastebin.com/jFhzd3qj >>>>>>>> >>>>>> >>>>>> Oh! If you did compile it, then can you check if you have >>>>>> "libcap-devel" installed? >>>>>> >>>>>> Regards >>>>>> HASSAN > >
