Thanks Hassan, I have covered all the steps except the WCCP Configuration, Coz i dont use WCCP Router. I tried discovering for Routing loop and was unable to find any, Could you please help me How to Find a Routing loop. Here is my Squid Conf and my TCPdump sample. http://pastebin.com/aJskfywx --> TCPdump http://pastebin.com/b9u24rEC --> Squid Conf Thanks, Ganesh J On Tue, Jul 8, 2014 at 2:55 AM, Nyamul Hassan <nyamul@xxxxxxxxx> wrote: > Did you check the possibility of a routing loop as described in the > troubleshooting section of the TProxy wiki page? In fact, can you > check that you have covered all the steps mentioned in that section? > > Regards > HASSAN > > On Tue, Jul 8, 2014 at 2:37 AM, Info OoDoO <info@xxxxxxxxxxx> wrote: >> Thanks Hassan, >> >> Now the request are passing through Squid but Failing with "110 >> Connection Timed Out" Error. >> >> When I use transparent Mode its working fine. Any Idea..!! >> >> Thanks, >> Ganesh J >> Thanks, >> OodoO Fiber, >> +91 8940808080 >> www.oodoo.co.in >> >> >> On Tue, Jul 8, 2014 at 1:16 AM, Nyamul Hassan <nyamul@xxxxxxxxx> wrote: >>> Hi Ganesh, >>> >>> In your "basic data" pastebin, seems like the "ip rule" and "ip route" >>> rules are missing. >>> >>> Please see if running the following commands helps the situation: >>> * echo 100 squidtproxy >> /etc/iproute2/rt_tables >>> * ip rule add fwmark 1 lookup 100 >>> * ip route add local default dev lo table 100 >>> >>> Regards >>> HASSAN >>> >>> >>> On Tue, Jul 8, 2014 at 1:15 AM, Nyamul Hassan <nyamul@xxxxxxxxx> wrote: >>>> Can you also pastebin your squid.conf? >>>> >>>> Regards >>>> HASSAN >>>> >>>> On Tue, Jul 8, 2014 at 12:53 AM, collect oodoo <collect@xxxxxxxxxxx> wrote: >>>>> I have configured squid with the options in the below paste .. >>>>> http://pastebin.com/jFhzd3qj >>>>> I packets are being forwarded from the cache box to internet and i'm >>>>> able to see the Client Public address instaed of squid Box Public >>>>> Address.. >>>>> the Issue here is the requests are not being forwarded by or through Squid.. >>>>> I'm unable to view any log for the request on access.log. >>>>> If i use the same squid in transparent mode then I'm able to view the >>>>> requests forwarded and logged on access.log but it shows Squid Box >>>>> Public IP address. >>>>> Can some body Help me on this.. >>>>> My basic Data of Machine is >>>>> >>>>> http://pastebin.com/TdnhnJtx >>>>> >>>>> Thanks, >>>>> Ganesh J
