thanks,do you think my squid.conf is correct?
On 2013-12-1 17:48, Pavel Kazlenka wrote:
On 12/01/2013 12:41 PM, janwen wrote:
thanks,i telnet ssh port is ok:telent ip 22
and how can i ping squid proxy port 3142?
If telnet to ssh port is ok, than ip connection is fine and we get
back to theory of firewall. If you need proof that there is some
firewall between your client and squid server, just start tcpdump on
squid proxy (e.g. # tcpdump -i any 'port 3128'). Then try telnet from
client again. You will not see anything in capture on server.
On 2013-12-1 17:37, Pavel Kazlenka wrote:
On 12/01/2013 12:32 PM, janwen wrote:
thanks for your reply:
all your suggest,i tried before i send the email for help.
netstat -tulpn | grep ':3128'
(No info could be read for "-p": geteuid()=1000 but you should be
root.)
tcp6 0 0 :::3128
telnet localhost 3128
Trying 127.0.0.1...
Connected to ubuntu.San.
Escape character is '^]'.
so squid start ok.no firewall settings.
Then you have no ip connect between client and squid server. Check
using ping.
P.S. Please, don't CC me, use 'reply to list' action (if available
in your client).
On 2013-12-1 17:29, Pavel Kazlenka wrote:
TCP (telnet) timeout means that you have networking issue.
Check firewalls, routing as well as if squid is started and is
listening on port (#netstat -ntpl on squid node).
On 12/01/2013 12:24 PM, janwen wrote:
just try to use squid,i try to setup squid 2 days.
i use squidclient http://www.googe.com get response on local
machine,
but when i try to connect to from remote ip(any ip is allowed for
test),
i use:
telnet ip 3128 just get timeout exception.
my squid.conf as follow:
#
# Recommended minimum configuration:
#
#user
cache_effective_user squid
cache_effective_group squid
visible_hostname beerdark.com
# Example rule allowing access from your local networks.
# Adapt to list your (internal) IP networks from where browsing
# should be allowed
acl localnet src 10.0.0.0/8 # RFC1918 possible internal network
acl localnet src 172.16.0.0/12 # RFC1918 possible internal network
acl localnet src 192.168.0.0/16 # RFC1918 possible internal network
acl localnet src fc00::/7 # RFC 4193 local private network range
acl localnet src fe80::/10 # RFC 4291 link-local (directly
plugged) machines
#acl all src 0.0.0.0/0.0.0.0
acl SSL_ports port 443
acl Safe_ports port 80 # http
acl Safe_ports port 21 # ftp
acl Safe_ports port 443 # https
acl Safe_ports port 70 # gopher
acl Safe_ports port 210 # wais
acl Safe_ports port 1025-65535 # unregistered ports
acl Safe_ports port 280 # http-mgmt
acl Safe_ports port 488 # gss-http
acl Safe_ports port 591 # filemaker
acl Safe_ports port 777 # multiling http
acl CONNECT method CONNECT
acl testip src 222.73.112.140
http_access allow all
http_access allow testip
#
# Recommended minimum Access Permission configuration:
#
# Deny requests to certain unsafe ports
http_access deny !Safe_ports
# Deny CONNECT to other than secure SSL ports
http_access deny CONNECT !SSL_ports
# Only allow cachemgr access from localhost
http_access allow localhost manager
http_access deny manager
# We strongly recommend the following be uncommented to protect
innocent
# web applications running on the proxy server who think the only
# one who can access services on "localhost" is a local user
#http_access deny to_localhost
#
# INSERT YOUR OWN RULE(S) HERE TO ALLOW ACCESS FROM YOUR CLIENTS
#
# Example rule allowing access from your local networks.
# Adapt localnet in the ACL section to list your (internal) IP
networks
# from where browsing should be allowed
http_access allow localnet
http_access allow localhost
http_access allow testip
# And finally deny all other access to this proxy
#http_access allow all
http_access deny all
# Squid normally listens to port 3128
http_port 3128
# Uncomment and adjust the following to add a disk cache directory.
#cache_dir ufs /usr/local/squid/var/cache/squid 100 16 256
# Leave coredumps in the first cache dir
coredump_dir /usr/local/squid/var/cache/squid
#
# Add any of your own refresh_pattern entries above these.
#
refresh_pattern ^ftp: 1440 20% 10080
refresh_pattern ^gopher: 1440 0% 1440
refresh_pattern -i (/cgi-bin/|\?) 0 0% 0
refresh_pattern . 0 20% 4320
--
推荐使用最好的ssh翻墙服务:http://126.am/qNyHs4
使用方法:http://126.am/E71qo3
