Well! I have tried every mentioned method and still getting the same old error...! ----- Original Message ----- > From: Warren Baker <warren@xxxxxxxxxxx> > To: Anonymous <eletters_mail@xxxxxxxxx> > Cc: Amos Jeffries <squid3@xxxxxxxxxxxxx>; "squid-users@xxxxxxxxxxxxxxx" <squid-users@xxxxxxxxxxxxxxx>; Squid Developers <squid-dev@xxxxxxxxxxxxxxx> > Sent: Monday, July 23, 2012 1:00 PM > Subject: Re: Fw: [ERROR] commonUfsDirOpenSwapLog: Failed to open swap log > > On Mon, Jul 23, 2012 at 8:02 AM, Anonymous <eletters_mail@xxxxxxxxx> > wrote: >> squid_enable"YES" > > If you installed Squid from ports then you will have a file called > /usr/local/etc/rc.d/squid - which is the startup file. You can get the > startup variables from this file by executing it and passing the > option rcvar. > > # /usr/local/etc/rc.d/squid rcvar > # squid > # > squid_enable="NO" > # (default: "") > > it should return what the startup variable is and what it's value it. > In your configured setting, above, you are missing the '=' sign. So > set it to squid_enable="YES" and remove any of your other additional > references to squid. > > -- > .warren >
