On 17/07/2012 7:51 p.m., Anonymous wrote:
Sorry! I forget to paste the Error Log displaying continuously on the console in my previous message. Here's error log:
******************************************************************
[ERROR] commonUfsDirOpenSwapLog: Failed to open swap log
---------------------------------------------------------------------------
Squid Parent: (squid-1) process 1870 exited with status 1
Squid Parent: (squid-1) process 1874 started
commonUfsDirOpenSwapLog: Failed to open swap log.
Squid Parent: (squid-1) process 1874 exited with status 1
Squid Parent: (squid-1) process 1879 started
commonUfsDirOpenSwapLog: Failed to open swap log.
Squid Parent: (squid-1) process 1879 exited with status 1
Squid Parent: (squid-1) process 1879 will not be restarted due to repeated, frequent failures
squid[1850]: Exiting due to repeated, frequent failures
-------------***********************************************
These are the kernel messages about it.
The path to the failed fopen() is listed in cache.log at level 50,1
right before the "commonUfsDirOpenSwapLog" message is written.
--- On Tue, 7/17/12, Anonymous wrote:
From: Anonymous
1. OS: FreeBSD
9.0-RELEASE-p3 amd64
2. Squid User: squid:*:100:100:Squid
caching-proxy psuedo user:/var/squid:/usr/sbin/nologin
3. # squid -v
Squid Cache: Version 3.2.0.18-20120711-r11610
configure options: '--with-default-user=squid'
'--bindir=/usr/local/sbin' '--sbindir=/usr/local/sbin'
'--datadir=/usr/local/etc/squid'
'--libexecdir=/usr/local/libexec/squid'
'--localstatedir=/var/squid'
--sysconfdir=/usr/local/etc/squid'
'--with-logdir=/var/log/squid'
'--with-pidfile=/var/run/squid/squid.pid'
Your PID file (/var/run/squid/squid.pid) is not inside the localstatedir
(/var/squid/). Does that work within BSD policy?
'--with-large-files' '--enable-removal-policies=lru heap'
'--enable-delay-pools' '--disable-linux-netfilter'
'--disable-linux-tproxy' '--disable-epoll'
'--disable-translation' '--enable-basic-auth-helpers=DB NCSA
PAM MSNT SMB squid_radius_auth YP'
'--enable-digest-auth-helpers=password'
'--enable-external-acl-helpers=ip_user session unix_group
wbinfo_group' '--enable-ntlm-auth-helpers=smb_lm'
'--enable-negotiate-auth-helpers=squid_kerb_auth'
'--enable-storeio=ufs diskd aufs' '--enable-disk-io=AIO
Blocking DiskDaemon DiskThreads' '--disable-ecap'
'--disable-loadable-modules' '--enable-kqueue'
'--prefix=/usr/local' '--mandir=/usr/local/man'
'--infodir=/usr/local/info/'
'--build=amd64-portbld-freebsd9.0'
'build_alias=amd64-portbld-freebsd9.0' 'CC=cc' 'CFLAGS=-O2
-pipe -fno-strict-aliasing' 'LDFLAGS=' 'CPPFLAGS='
'CXX=c++' 'CXXFLAGS=-O2 -pipe -fno-strict-aliasing'
'CPP=cpp'
'--with-squid=/work/a/ports/www/squid31/work/squid-3.1.16'
'--enable-ltdl-convenience'
FYI: configure options went under the knife in 3.2 and a lot of them
have some form of change. Particularly the ones with parameters. See the
squid-3.2 release notes for details.
--------------------------------------------------------------------------
4. squid.conf >>
cache_effective_user squid
You built with "--with-default-user=squid" meaning the built-in value
for cache_effective_user is already "squid". You can omit that directive
from your config file.
# ls -all
/var/squid/cache/squid/swap.state
-rw-r----- 1 squid squid 130536 Jul 17
08:35 /var/squid/cache/squid/swap.state
What version/release of Squid created this swap file?
What cache_dir lines does your squid config contain? there is no disk
cache by default in 3.2 series.
Amos
