On Sat, Nov 12, 2011 at 12:57 PM, Amos Jeffries <squid3@xxxxxxxxxxxxx> wrote: > On 12/11/2011 1:02 a.m., feralert wrote: >> >> On Fri, Nov 11, 2011 at 1:22 AM, Amos Jeffries<squid3@xxxxxxxxxxxxx> >> wrote: >>> >>> On 11/11/2011 4:16 a.m., feralert wrote: >>>> >>>> As a workaround (thanks to Radoslaw, who came up with the idea) I have >>>> done this: >>>> >>>> I added an entry for www.citibank.com pointing to the working server >>>> ip into /etc/hosts, then added "hosts_file /etc/hosts" into >>>> squid.conf. >>>> >>>> It works for the time being, but is not a final solution. >>> >>> NP: You should not have had to mark /etc/hosts in squid.conf (one less >>> place >>> to undo later), unless the file is in a strange location. >> >> I'm not sure if I undestand your tip. >> Do you mean that I can get rid of "/etc/hosts" argument to the >> "hosts_file" directive because that is actually the default setting >> for "hosts_file"?, or you mean that I can get rid of the whole >> directive since squid already takes into account the entries in >> /etc/hosts by default? > > Yes. > > You should not need the whole line because it is the default value. > > Removing just the value will tell Squid *not* to use the hosts file at all > (or kill Squid with a bungled config, one or the other). > > > Amos > Thank you Amos for the explanation and your help. >From last Friday both servers pointing to www.citibank.com are answering HTTP 1.0 petitions as they should, and therefore the problem is gone. This confirms it wasn't a squid 2.7 issue but citibank's, although I haven't got confirmation from them because they didn't care to answer my emails. Cheers, Fred.
