Hi Please guide me to clear my queries. Thanks, Benjamin On Tue, Oct 11, 2011 at 7:22 PM, benjamin fernandis <benjo11111@xxxxxxxxx> wrote: > Hi All, > > We have requirement to configure squid to deploy with cisco wccp2. > > I have some confusion regarding configuration, kindly clear my queries > and guide me to configure it. > > > My current network senario: > > Wan side cisco 7200 router ( wan ip 84.24.xx.xx ) ( lan ip > 149.255.xx.xx) ( lan ip is bgp routed ip pool ) > | > | > switch ---------------------squid box ( one > interface only ip : 149.255.xx.19) ( gateway ip is router lan ip ) > | > | > End Users > > > Now i need to configure squid to use with wccp. > > > > i tried to find reference document from google and squid wiki. But i > have some queries, > > > what is remote ip while configuring ip tunnel in squid and local ip ? > > as per my current configuration i tried : remote ip is router wan ip ( > 84.24.xx.xx) and local ip is squd ip ( 149.255.xx.xx ) > > > is it correct one ? > > > and what is the wccp2_router router ip in squid.conf > > i used 149.255.xx.xx ( router lan ip ) > > is it correct one ? > > > --------------------------------------------------------------------------------- > test 1 > > actually i tried to configure router loop back ip on tunnel remote and > squid ip as local ip on tunnel but that time i can see traffic on wccp > interface and traffic on iptables nat redirection rule but no traffic > in squid access.log and surfing is not working. > > ------------------------------------------------------------------------------------------------ > > So please guide me , what could be right configuration while going to > use squid with wccp2. > > > OS: fedora 15 > squid : 3.1.14 > > > Regards, > Benjo >
