Search squid archive

Re: policy based routing from cisco router for squid tproxy

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, 28 Sep 2011 11:01:35 -0500, Luis Daniel Lucio Quiroz wrote:
2011/9/28 Benjamin <benjo11111@xxxxxxxxx>:
 Hi,

I am looking for POLICY BASED ROUTING rules , which i need to use route web traffic to squid box which is configured for tproxy purpose.If someone tried
it , please share your tips and feedback for that.


Network setup:

   ROUTER   ------------> PBR CONFIGURATION
         |
         |
         |
         |
      SWITCH
       |  |
       |  |
       |  | -----SQUID BOX ( 1 interface )
       |
      BANDWITH
      SHAPPER
       |
       |
  END  USERS


Thanks,
Benjo Fernandis



Easy,
#       acl normal_service_net src 10.0.0.0/24
#       acl good_service_net src 10.0.1.0/24
#       tcp_outgoing_tos 0x00 normal_service_net
#       tcp_outgoing_tos 0x20 good_service_net


with this you are marking tcp packets, then in your cisco/linux you
can do rules that depending mark and squid-ip will select an specific
rule table. look for "ip rule" command to specify tables rules if you
are using linux.


Depending on your Squid version you may also have zph_* directives (2.7), or qos_flows (3.1+) to play with. They set the TOS value based on source flow type (HIT, MISS, etc).

Amos


[Index of Archives]     [Linux Audio Users]     [Samba]     [Big List of Linux Books]     [Linux USB]     [Yosemite News]

  Powered by Linux