2011/9/28 Benjamin <benjo11111@xxxxxxxxx>: > Hi, > > I am looking for POLICY BASED ROUTING rules , which i need to use route web > traffic to squid box which is configured for tproxy purpose.If someone tried > it , please share your tips and feedback for that. > > > Network setup: > > ROUTER ------------> PBR CONFIGURATION > | > | > | > | > SWITCH > | | > | | > | | -----SQUID BOX ( 1 interface ) > | > BANDWITH > SHAPPER > | > | > END USERS > > > Thanks, > Benjo Fernandis > > Easy, # acl normal_service_net src 10.0.0.0/24 # acl good_service_net src 10.0.1.0/24 # tcp_outgoing_tos 0x00 normal_service_net # tcp_outgoing_tos 0x20 good_service_net with this you are marking tcp packets, then in your cisco/linux you can do rules that depending mark and squid-ip will select an specific rule table. look for "ip rule" command to specify tables rules if you are using linux. LD http://www.twitter.com/ldlq
