Amos Jeffries wrote:
On 23/02/11 19:50, Senthilkumar wrote:
Amos Jeffries wrote:
On Wed, 23 Feb 2011 10:41:20 +0530, Senthilkumar wrote:
Hello All,
We have a gateway machine which has three upstream isp and to make
clients use the particular isp we use advance routing based on the
source address. When we run squid on the same machine to log
websites all traffic passes through the single isp i.e. the isp which
is set as default gateway. We need all the users to pass through squid
and use different isp's as per source route.
Please share your views to achieve it.
http://wiki.squid-cache.org/ConfigExamples/Strange/RotatingIPs
Amos
Thank you very much Amos,
We have clients in 10.X.X and 172.16.1.X and 172.16.2.X series, we need
each client series would use single isp for upload and download.
whether the following configuration achieve it?
acl isp1 src 10.X.X
acl isp2 src 172.16.1.X
acl isp3 src 172,16.2.X
acl download method GET HEAD
acl upload method POST PUT
tcp_outgoing_address <isp1 ip> isp1 download upload
tcp_outgoing_address <isp2 ip> isp1 download upload
tcp_outgoing_address <isp3 ip> isp1 download upload
No this wont work. Requests cannot have two methods (one up one down)
simultaneously.
The example was written by an ISP with a satellite and a ground link
where direction of majority data traffic matters a lot. You do not
need the method ACL. Only the src test.
Amos
Thank you very much.
