Now it is solved. It's not necesary open ports on modem-router. I modified
squid.conf with acl safe_ports port 123 and install ntdp server.
Thanks.
--------------------------------------------------
From: "Jose perez" <jopeme2000@xxxxxxxx>
Sent: Monday, October 18, 2010 3:06 PM
To: <squid-users@xxxxxxxxxxxxxxx>
Subject: Re: Squid 2.7 & sync outside time server
I have installed a ntp server on windows xp with squid 2.7. and i have
configured ntpd. Now i have changed on a windows xp client (i have
modified registry to include internal ip address of my squid) but it
doesn't works.
Windows client; ip: 130.210.69.2
gateway: 130.210.69.1
dns primary: 130.210.69.1
Windows xp with squid: internal ip: 130.210.69.1
external ip: 192.168.1.2
gateway: 192.168.1.1
dns primary: 80.58.0.33
dns secondary: 80.58.32.97
On a modem-router adsl i have used NAT and port 123 to 192.168.1.2
address(external )
any idea ?
--------------------------------------------------
From: "Carlos Lopez" <the_spide21@xxxxxxxxx>
Sent: Monday, October 18, 2010 5:15 AM
To: <squid-users@xxxxxxxxxxxxxxx>
Subject: Re: Squid 2.7 & sync outside time server
Hi/Hola,
From some point of view, it is better to setup yourself a NTP server for
the local LAN and allow NTP Server to update time to any ntp.*.com
sources, then thru DHCP or manually configure users to update localtime
from the loca resource, that way you can save a lot of traffic and
efforts.
Then open the UDP port 123 on your router and let's the traffic flow.
Cheers/saludos.
--- El vie, 10/15/10, Jose perez <jopeme2000@xxxxxxxx> escribió:
De: Jose perez <jopeme2000@xxxxxxxx>
Asunto: Re: Squid 2.7 & sync outside time server
A: squid-users@xxxxxxxxxxxxxxx
Fecha: viernes, 15 de octubre de 2010, 10:01 pm
Where i have to open port 123 ? On a
Modem-router adsl and i must to have nat to the proxy
external address ?
> The Windows XP systems require a NTP server that they
can connect to in order to time sync. You can either open
TCP/123 and UDP/123 for your clients to the internet, or set
up NTPD on your squid server and specify it as your NTP
server.
