> From: Amos Jeffries <squid3@xxxxxxxxxxxxx> > Date: Mon, 19 Oct 2009 14:32:17 +1300 > Cc: "squid-users@xxxxxxxxxxxxxxx" <squid-users@xxxxxxxxxxxxxxx> > Subject: Re: WCCP > > Ross Kovelman wrote: >> I am going to be using WCCP. I did another reconfigure with the --enable >> WCCP option. How can I check that it is on and running? The next step I >> need to do is upgrade to version 2 since the Cisco only communicates on >> version 2. I tried to do the patch < upgrade patch but then I get a >> response with path to upgrade and I am not sure where the file is I need >> patch. > > There is zero need to patch for support WCCPv2. It's been built into > Squid for many years now. > > Run "./configure --help". > * If it lists "--disable-wccpv2" there is no need to do anything. > * If it lists "--enable-wccpv2" , add that to your build options. > * If it does not mention "wccpv2" at all upgrade your Squid version. > > Then setup squid.conf with the relevant wccp2_* options. > > http://www.squid-cache.org/Doc/config/ or the wiki example configs have > details on those. > > Amos > -- > Please be using > Current Stable Squid 2.7.STABLE7 or 3.0.STABLE19 > Current Beta Squid 3.1.0.14 Amos, Thanks again. Running the ./configure --help only says this: --disable-wccp Disable Web Cache Coordination V1 Protocol --disable-wccpv2 Disable Web Cache Coordination V2 Protocol When I did the install I ran the ./configure --enable wccp option. I didn't say --enable-wccpv2, does this matter? I also have this in the config: wccp2_router 192.168.16.1 wccp2_forwarding_method 1 wccp2_return_method 1 I am running Squid Web Proxy 2.7.STABLE5. Thanks
