Hi, I have installed SQUID 3 on an OpenSuSe 11.1 server fitted with 2 NICs. NIC1 is connected to a Broadband router. NIC 2 is connected to an internal LAN. I followed the instructions in the squid.conf file to set the http_port to the internal NIC address (in this case 10.1.2.25:3128). When I try to access the internet from a pc on the LAN with the proxy set to 10.1.2.25, port 3128 nothing happens. Connection times out. I have run SQUID in debug mode and tried connecting from the Squid server wvia squidconsole, and connection works (connecting from 127.0.0.0). I installed wireshark on the Squid server and ran a capture on the LAN NIC while trying to connect. All I saw was SYN packets from the originating PC. No ACKs were sent from the Squid server. I don't know if what I have said makes a great deal of sense, but does anyone have any ideas what I am doing wrong (routing is NOT set up between the LAn & WAN NICs). -- View this message in context: http://www.nabble.com/Squid-3-multi-homed-on-OpenSuSe-11.1-setup-problem-tp25276639p25276639.html Sent from the Squid - Users mailing list archive at Nabble.com.
