Hi, On Wed, 10 Jun 2009, oar22 wrote: > Sorry if this has been asked a bunch of times before, but seem to have hit a > dead end here. I'm running Squid version 3.0 on linux. When it starts up it > shows that it's accepting HTTP connections at the correct IP. I'm able to > test using squidclient and that part seems to work just fine -- the correct > HTML comes up, all the relevant log files get written to, and I don't get > any error messages. However, when I put in the same IP in the browser's > proxy settings along with the default IP, any page I try to go to just times > out. I turned off the Windows firewall and the antivirus on the client > machine but to no avail. Any suggestions would be very much appreciated. >From the client machine with the browser, can you: 1. Ping the proxy server (ie make sure there's no routing issues). 2. Telnet to the proxy server on the relevant port, get a reply and GET http://google.com/ HTTP/1.0 (make sure a firewall isn't blocking connections). and if you like: 3. Run "tcpdump -i <interface> tcp host <clientip>" on the proxy server to see what network conversation the proxy server has with the client. As with [2], no packets probably indicates a firewall blocking the path. Gavin
