M. Asghar Nazir wrote:
Dear Amos!
I want to setup same setup same setup like in version 2.5 using these commands written bellow.
httpd_accel_host
httpd_accel_port
httpd_accel_with_proxy
httpd_accel_uses_host_header
and add prerouting rule to redirect all tcp 80 traffic to squid port 3128.
these "prerouting rule" probably stay unchanged.
Because I don't want to setup proxy setting on all of my lan users computers. if any user want to brows the internet port 80 req redirect it to squid port 3128.
And I really don't have any idea how to setup in new version of squid 3.0. please advise
okay, that is a simple intercepting proxy.
drop the httpd_accel garbage.
add "transparent" to end of "http_port 3128" line in squid.conf
Amos
----- Original Message ----
From: Amos Jeffries <squid3@xxxxxxxxxxxxx>
To: asghar_nazir@xxxxxxxxx
Cc: Jeff Peng <jeff@xxxxxxxxxxxxxxxxx>; squid-users@xxxxxxxxxxxxxxx
Sent: Tuesday, February 10, 2009 9:52:54 AM
Subject: Re: How to enable transparent proxy (squid-3.0.STABLE13)
M. Asghar Nazir wrote:
Dear Jeff!
Thanks for your quick reply. Actually I have only work on squid 2.5 version and after a very long time now I need to rebuilt proxy in my new company using new version squid 3.0.
could you please help me with a live Config Examples of squid 3.0 transparent proxy version.
Rgd,
Three things:
1) please don't hijack discussions. They can lead to confusion such as Jeff's assumption that you were still talking about tproxy.
2) Are you trying to setup a website accelerator proxy (reverse proxy) or a traffic intercepting proxy?
Both of your emails to date contradict each other.
The httpd_accel_* are old 2.5 config for accelerators. Replaced with any of the setups listed under "Reverse Proxy" at:
http://wiki.squid-cache.org/ConigExamples
Transparent proxy is a single broad term used for several other very different types of setup.
Please clarify what you need.
3)
The ConfigExamples wiki pages details how to setup their config. In most cases they are live configs used by people somewhere on the web.
Amos
--- On Tue, 2/10/09, Jeff Peng <jeff@xxxxxxxxxxxxxxxxx> wrote:
From: Jeff Peng <jeff@xxxxxxxxxxxxxxxxx>
Subject: Re: How to enable transparent proxy (squid-3.0.STABLE13)
To: asghar_nazir@xxxxxxxxx
Cc: squid-users@xxxxxxxxxxxxxxx
Date: Tuesday, February 10, 2009, 9:01 AM
2009/2/10 M. Asghar Nazir <asghar_nazir@xxxxxxxxx>:
Dear All,
I am want to configure squid as a transparent proxy
using squid-3.0.STABLE13
version. I have compile squid with following
parameters written below.
/configure --enable-delay-pools --enable-snmp
--enable-arp-acl
--enable-default-err-language="English"
--enable-default-err-language="English"
--enable-linux-netfilter --disable-ident-lookups
--with-filedescriptors=51200
when I open /usr/local/squid/etc/squid.conf
I didn't find these options their to enable
transperent proxy.
httpd_accel_host
httpd_accel_port
httpd_accel_with_proxy
httpd_accel_uses_host_header
This is the very old directives in Squid-2.5 version.
You could check the new configure directives in
squid.conf.default or
configure samples on:
http://wiki.squid-cache.org/ConfigExamples/
-- Jeff Peng
Office: +86-20-38350822
AIM: jeffpang
www.dtonenetworks.com
-- Please be using
Current Stable Squid 2.7.STABLE6 or 3.0.STABLE13
Current Beta Squid 3.1.0.5
--
Please be using
Current Stable Squid 2.7.STABLE6 or 3.0.STABLE13
Current Beta Squid 3.1.0.5
