Chris Robertson wrote:
vivian t wrote:
On Wed, Feb 4, 2009 at 10:35 PM, Chris Robertson <crobertson@xxxxxxx>
wrote:
vivian t wrote:
hello
when i try to surf any site from any pc i start the squid server in
debug level 1
and found this lines
commBind: cannot bind socket FD 14 to X.X.X.X: (99) cannot assign
requested address
what is it mean ...?
It means that Squid can't open a network socket on the IP X.X.X.X.
Similar error messages from the FAQ are...
http://wiki.squid-cache.org/SquidFaq/TroubleShooting#head-97c3ff164d9706d3782ea3b242b6e409ce8395f6
or
http://wiki.squid-cache.org/SquidFaq/TroubleShooting#head-19aa8aba19772e32d6e3f783a20b0d2be0edc6a2
Additionally in the case of TPROXY, it may mean you misusing the tproxy
flag.
A dedicated TPROXY-only receiving port is REQUIRED, and MUST have the
'tproxy' option set.
Without knowing what "X.X.X.X" actually is, or seeing your
squid.conf, there
is a limited amount of help that can be offered.
Chris
hello
i configure squid with tproxy
X.X.X.X the ip address of client who connect to squid
http_port 8080 tproxy
Two requests:
1) Please reply-all or reply only to the list.
2) If you are going to keep the message history in your quote, add new
information in-line or at the bottom. Posting replies at the top makes
the archives hard to read.
Now, on to your issue... If I understand it correctly, using tproxy
requires kernel, iptables AND Squid patches. See
http://wiki.squid-cache.org/ConfigExamples/TPROXYPatchingCentOS for a
general outline for Squid >3.1 or
http://wiki.squid-cache.org/Features/Tproxy4 for upcoming tproxy4
support in Squid 3.1.
The error message you are seeing probably means that you have not
patched your kernel. But someone else on the list might have more insight.
Chris
Since vivian t first contacted the list about this I've been
investigating the current state of the three softwares involved and
updating the Features/Tproxy4 page.
The CentOS patching how-to is only applicable for older kernel or
iptables versions and we can't/don't/won't provide any support if you
have trouble.
What I'd suggest people coming at this now is to pull the official
bundles of Squid 3.1, kernel 2.6.28, and iptables 1.4.3, and follow the
instructions in the wiki feature page.
http://wiki.squid-cache.org/Features/Tproxy4
If you have any troubles with those, please first experiment to see if
you can find a solution.
PS: even this advice will likely be outdated soon as iptables advances
towards a release.
Amos
--
Please be using
Current Stable Squid 2.7.STABLE6 or 3.0.STABLE13
Current Beta Squid 3.1.0.5
