Re: Squid 3.0 STABLE 12 is available

["Enrique" <enrique@xxxxxxxxx>]

Fine!
i was tired of looking answers to my problem abaut the images no show when 
making image search, the problem was because acl maxconn  having value 4, i 
have deactivate all acls and see whats happened  and finaly this acl  not 
permit see all images in a web page, i have incremented  this value to 32 , 
i;m no sure abat th rigth value, but with this work fine and finaly my users 
and me we happy, thaks

sorry abaut my english and thanks to all people  that helpme to fix my 
error, haved dedicated time reading my bad english .
regards
----- Original Message ----- 
From: "Amos Jeffries" <squid3@xxxxxxxxxxxxx>
To: "Enrique" <enrique@xxxxxxxxx>
Cc: <squid-users@xxxxxxxxxxxxxxx>
Sent: Friday, January 23, 2009 10:47 AM
Subject: Re:  Squid 3.0 STABLE 12 is available


> Enrique wrote:
> > fine
> > thank very much
> > and sorry again, but if you see in my configure option i have removed the 
> > authentication heper option because many errors related with ldap, pam, a 
> > realy use only digest authentication.
> > one cuestion i'm not include in configure option any authentication 
> > helper the squid unsoport thats helpers??????
>
> Squid will merely not build those helpers from its own sources.
>
> It will still support same helper built by other means.
>
> Amos
>
>
> > here i include the lasts lines refered wiht 3 errors separeted by 
> > *************************************
> > Making all in external_acl
> > make[2]: Entering directory 
> > `/root/squid-3.0.STABLE12/helpers/external_acl'
> > Making all in ip_user
> > make[3]: Entering directory 
> > `/root/squid-3.0.STABLE12/helpers/external_acl/ip_user'
> > make[3]: Nothing to be done for `all'.
> > make[3]: Leaving directory 
> > `/root/squid-3.0.STABLE12/helpers/external_acl/ip_user'
> > Making all in session
> > make[3]: Entering directory 
> > `/root/squid-3.0.STABLE12/helpers/external_acl/session'
> > gcc -DHAVE_CONFIG_H -I. -I. -I../../../include -I. -I../../../include -I../../../include 
> >     -Wall -g -O2 -c squid_session.c
> > squid_session.c:44:20: error: db_185.h: No such file or directory
> > squid_session.c:51: error: expected '=', ',', ';', 'asm' or 
> > '__attribute__' before '*' token
> > squid_session.c: In function 'init_db':
> > squid_session.c:55: error: 'db' undeclared (first use in this function)
> > squid_session.c:55: error: (Each undeclared identifier is reported only 
> > once
> > squid_session.c:55: error: for each function it appears in.)
> > squid_session.c:55: warning: implicit declaration of function 'dbopen'
> > squid_session.c:55: error: 'DB_BTREE' undeclared (first use in this 
> > function)
> > squid_session.c: In function 'shutdown_db':
> > squid_session.c:64: error: 'db' undeclared (first use in this function)
> > squid_session.c: In function 'session_active':
> > squid_session.c:71: error: 'DBT' undeclared (first use in this function)
> > squid_session.c:71: error: expected ';' before 'key'
> > squid_session.c:72: error: 'key' undeclared (first use in this function)
> > squid_session.c:74: error: 'db' undeclared (first use in this function)
> > squid_session.c:74: error: 'data' undeclared (first use in this function)
> > squid_session.c: In function 'session_login':
> > squid_session.c:90: error: 'DBT' undeclared (first use in this function)
> > squid_session.c:90: error: expected ';' before 'key'
> > squid_session.c:92: error: 'key' undeclared (first use in this function)
> > squid_session.c:94: error: 'data' undeclared (first use in this function)
> > squid_session.c:96: error: 'db' undeclared (first use in this function)
> > squid_session.c: In function 'session_logout':
> > squid_session.c:101: error: 'DBT' undeclared (first use in this function)
> > squid_session.c:101: error: expected ';' before 'key'
> > squid_session.c:102: error: 'key' undeclared (first use in this function)
> > squid_session.c:104: error: 'db' undeclared (first use in this function)
> > make[3]: *** [squid_session.o] Error 1
> > make[3]: Leaving directory 
> > `/root/squid-3.0.STABLE12/helpers/external_acl/session'
> > make[2]: *** [all-recursive] Error 1
> > make[2]: Leaving directory 
> > `/root/squid-3.0.STABLE12/helpers/external_acl'
> > make[1]: *** [all-recursive] Error 1
> > make[1]: Leaving directory `/root/squid-3.0.STABLE12/helpers'
> > make: *** [all-recursive] Error 1
> > **************************************************************
> > Making all in NCSA
> > make[3]: Entering directory 
> > `/root/squid-3.0.STABLE12/helpers/basic_auth/NCSA'
> > cc -DHAVE_CONFIG_H -I. -I. -I../../../include -I../../../include    -g -c 
> > ncsa_auth.c
> > cc -DHAVE_CONFIG_H -I. -I. -I../../../include -I../../../include    -g -c 
> > crypt_md5.c
> > /bin/sh ../../../libtool --tag=CC --mode=link cc  -g  -g -o ncsa_auth 
> > ncsa_auth.o 
> > crypt_md5.o -L../../../lib -lmiscutil -lcrypt -lpthread -lm -lresolv -lnsl
> > mkdir .libs
> > cc -g -g -o ncsa_auth ncsa_auth.o 
> > ypt_md5.o  -L/root/squid-3.0.STABLE12/lib -lmiscutil -lcrypt -lpthread -lm 
> >   -lresolv -lnsl
> > make[3]: Leaving directory 
> > `/root/squid-3.0.STABLE12/helpers/basic_auth/NCSA'
> > Making all in PAM
> > make[3]: Entering directory 
> > `/root/squid-3.0.STABLE12/helpers/basic_auth/PAM'
> > cc -DHAVE_CONFIG_H -I. -I. -I../../../include -I../../../include    -g -c 
> > pam_auth.c
> > pam_auth.c:76:31: error: security/pam_appl.h: No such file or directory
> > pam_auth.c:100: warning: 'struct pam_response' declared inside parameter 
> > list
> > pam_auth.c:100: warning: its scope is only this definition or 
> > declaration, which is probably not what you want
> > pam_auth.c:100: warning: 'struct pam_message' declared inside parameter 
> > list
> > pam_auth.c: In function 'password_conversation':
> > pam_auth.c:102: error: dereferencing pointer to incomplete type
> > pam_auth.c:102: error: 'PAM_PROMPT_ECHO_OFF' undeclared (first use in 
> > this function)
> > pam_auth.c:102: error: (Each undeclared identifier is reported only once
> > pam_auth.c:102: error: for each function it appears in.)
> > pam_auth.c:103: error: dereferencing pointer to incomplete type
> > pam_auth.c:103: error: dereferencing pointer to incomplete type
> > pam_auth.c:104: error: 'PAM_CONV_ERR' undeclared (first use in this 
> > function)
> > pam_auth.c:116: error: invalid application of 'sizeof' to incomplete type 
> > 'struct pam_response'
> > pam_auth.c:121: error: invalid use of undefined type 'struct 
> > pam_response'
> > pam_auth.c:121: error: dereferencing pointer to incomplete type
> > pam_auth.c:122: error: invalid use of undefined type 'struct 
> > pam_response'
> > pam_auth.c:122: error: dereferencing pointer to incomplete type
> > pam_auth.c:124: error: invalid use of undefined type 'struct 
> > pam_response'
> > pam_auth.c:124: error: dereferencing pointer to incomplete type
> > pam_auth.c:124: error: 'PAM_SUCCESS' undeclared (first use in this 
> > function)
> > pam_auth.c: At top level:
> > pam_auth.c:127: error: variable 'conv' has initializer but incomplete 
> > type
> > pam_auth.c:129: warning: excess elements in struct initializer
> > pam_auth.c:129: warning: (near initialization for 'conv')
> > pam_auth.c:131: warning: excess elements in struct initializer
> > pam_auth.c:131: warning: (near initialization for 'conv')
> > pam_auth.c: In function 'main':
> > pam_auth.c:148: error: 'pam_handle_t' undeclared (first use in this 
> > function)
> > pam_auth.c:148: error: 'pamh' undeclared (first use in this function)
> > pam_auth.c:149: error: 'PAM_SUCCESS' undeclared (first use in this 
> > function)
> > pam_auth.c:207: error: invalid use of undefined type 'struct pam_conv'
> > pam_auth.c:237: error: 'PAM_USER' undeclared (first use in this function)
> > pam_auth.c:239: error: 'PAM_CONV' undeclared (first use in this function)
> > make[3]: *** [pam_auth.o] Error 1
> > make[3]: Leaving directory 
> > `/root/squid-3.0.STABLE12/helpers/basic_auth/PAM'
> > make[2]: *** [all-recursive] Error 1
> > make[2]: Leaving directory `/root/squid-3.0.STABLE12/helpers/basic_auth'
> > make[1]: *** [all-recursive] Error 1
> > make[1]: Leaving directory `/root/squid-3.0.STABLE12/helpers'
> > make: *** [all-recursive] Error 1
> > *************************************************************************************************************************** 
> > make[3]: Entering directory 
> > `/root/squid-3.0.STABLE12/helpers/external_acl/ldap_group'
> > gcc -DHAVE_CONFIG_H -I. -I. -I../../../include -I. -I../../../include -I../../../include 
> >     -Wall -g -O2 -c squid_ldap_group.c
> > squid_ldap_group.c:74:18: error: lber.h: No such file or directory
> > squid_ldap_group.c:75:18: error: ldap.h: No such file or directory
> > squid_ldap_group.c:95: error: 'LDAP_SCOPE_SUBTREE' undeclared here (not 
> > in a function)
> > squid_ldap_group.c:99: error: 'LDAP_DEREF_NEVER' undeclared here (not in 
> > a function)
> > squid_ldap_group.c:105: error: 'LDAP_NO_LIMIT' undeclared here (not in a 
> > function)
> > squid_ldap_group.c:113: error: expected ')' before '*' token
> > squid_ldap_group.c:168: error: expected ')' before '*' token
> > squid_ldap_group.c:173: error: expected ')' before '*' token
> > squid_ldap_group.c:178: error: expected ')' before '*' token
> > squid_ldap_group.c:186: error: expected ')' before '*' token
> > squid_ldap_group.c:191: error: expected ')' before '*' token
> > squid_ldap_group.c: In function 'main':
> > squid_ldap_group.c:215: error: 'LDAP' undeclared (first use in this 
> > function)
> > squid_ldap_group.c:215: error: (Each undeclared identifier is reported 
> > only once
> > squid_ldap_group.c:215: error: for each function it appears in.)
> > squid_ldap_group.c:215: error: 'ld' undeclared (first use in this 
> > function)
> > squid_ldap_group.c:217: error: 'LDAP_PORT' undeclared (first use in this 
> > function)
> > squid_ldap_group.c:285: error: 'LDAP_SCOPE_BASE' undeclared (first use in 
> > this function)
> > squid_ldap_group.c:287: error: 'LDAP_SCOPE_ONELEVEL' undeclared (first 
> > use in this function)
> > squid_ldap_group.c:315: error: 'LDAP_DEREF_ALWAYS' undeclared (first use 
> > in this function)
> > squid_ldap_group.c:317: error: 'LDAP_DEREF_SEARCHING' undeclared (first 
> > use in this function)
> > squid_ldap_group.c:319: error: 'LDAP_DEREF_FINDING' undeclared (first use 
> > in this function)
> > squid_ldap_group.c:523: warning: implicit declaration of function 
> > 'ldap_init'
> > squid_ldap_group.c:528: warning: implicit declaration of function 
> > 'squid_ldap_set_connect_timeout'
> > squid_ldap_group.c:558: warning: implicit declaration of function 
> > 'squid_ldap_set_timelimit'
> > squid_ldap_group.c:559: warning: implicit declaration of function 
> > 'squid_ldap_set_referrals'
> > squid_ldap_group.c:560: warning: implicit declaration of function 
> > 'squid_ldap_set_aliasderef'
> > squid_ldap_group.c:562: warning: implicit declaration of function 
> > 'ldap_simple_bind_s'
> > squid_ldap_group.c:563: error: 'LDAP_SUCCESS' undeclared (first use in 
> > this function)
> > squid_ldap_group.c:564: warning: implicit declaration of function 
> > 'ldap_err2string'
> > squid_ldap_group.c:564: warning: format '%s' expects type 'char *', but 
> > argument 3 has type 'int'
> > squid_ldap_group.c:565: warning: implicit declaration of function 
> > 'ldap_unbind'
> > squid_ldap_group.c:573: warning: implicit declaration of function 
> > 'searchLDAP'
> > squid_ldap_group.c:593: warning: implicit declaration of function 
> > 'squid_ldap_errno'
> > squid_ldap_group.c:593: error: 'LDAP_INVALID_CREDENTIALS' undeclared 
> > (first use in this function)
> > squid_ldap_group.c: At top level:
> > squid_ldap_group.c:686: error: expected ')' before '*' token
> > squid_ldap_group.c:736: error: expected ')' before '*' token
> > make[3]: *** [squid_ldap_group.o] Error 1
> > make[3]: Leaving directory 
> > `/root/squid-3.0.STABLE12/helpers/external_acl/ldap_group'
> > make[2]: *** [all-recursive] Error 1
> > make[2]: Leaving directory 
> > `/root/squid-3.0.STABLE12/helpers/external_acl'
> > make[1]: *** [all-recursive] Error 1
> > make[1]: Leaving directory `/root/squid-3.0.STABLE12/helpers'
> >
> >
> > ----- Original Message ----- From: "Amos Jeffries" <squid3@xxxxxxxxxxxxx>
> > To: "Enrique" <enrique@xxxxxxxxx>
> > Sent: Friday, January 23, 2009 10:07 AM
> > Subject: Re:  Squid 3.0 STABLE 12 is available
> >
> >
> > > Enrique wrote:
> > > > hello
> > > > escusesme before all
> > > > i done as you say, end recive build Build Successful, but when i make 
> > > > squid3 -v  it show
> > > > Squid Cache: Version 3.0.PRE5
> > > > configure options: '--build=i486-linux-gnu' '--prefix=/usr' 
> > > > '--includedir=${prefix}/include' '--mandir=${prefix}/share/man' 
> > > > '--infodir=${prefix}/share/info' '--sysconfdir=/etc' 
> > > > '--localstatedir=/var' '--libexecdir=${prefix}/lib/squid3' 
> > > > '--disable-maintainer-mode' '--disable-dependency-tracking' 
> > > > '--srcdir=.' '--datadir=/usr/share/squid3' '--sysconfdir=/etc/squid3' 
> > > > '--mandir=/usr/share/man' '--with-cppunit-basedir=/usr' 
> > > > '--enable-inline' '--enable-async-io=8' 
> > > > '--enable-storeio=ufs,aufs,coss' 
> > > > '--enable-diskio=AIO,Blocking,DiskDaemon,DiskThreads' 
> > > > '--enable-removal-policies=lru,heap' '--enable-poll' 
> > > > '--enable-digest-pools' '--enable-snmp' '--enable-htcp' 
> > > > '--enable-select' '--enable-carp' '--enable-large-files' 
> > > > '--enable-underscores' '--enable-auth=basic,digest,ntlm' 
> > > > '--enable-basic-auth-helpers=LDAP,MSNT,NCSA,PAM,SASL,SMB,YP,getpwnam,multi-domain-NTLM' 
> > > > '--enable-ntlm-auth-helpers=SMB' 
> > > > '--enable-digest-auth-helpers=ldap,password' 
> > > > '--enable-external-acl-helpers=ip_user,ldap_group,session,unix_group,wbinfo_group' 
> > > > '--with-filedescriptors=4096' '--enable-epoll' 
> > > > '--enable-linux-netfilter' 'CC=cc' 'CFLAGS=-g -Wall -O2' 'CPPFLAGS=' 
> > > > 'CXXFLAGS=-g -Wall -O2' 'CXX=g++' 'LDFLAGS=' 
> > > > 'build_alias=i486-linux-gnu'
> > > >
> > > > and when i put squid -v it show me:
> > > > configure options:  '--build=i486-linux-gnu' '--prefix=/usr' 
> > > > '--includedir=/include' '--mandir=/share/man' '--infodir=/share/info' 
> > > > '--sysconfdir=/etc' '--localstatedir=/var' '--libexecdir=/lib/squid3' 
> > > > '--srcdir=.' '--datadir=/usr/share/squid3' '--sysconfdir=/etc/squid3' 
> > > > '--mandir=/usr/share/man' '--with-cppunit-basedir=/usr' 
> > > > '--enable-inline' '--enable-async-io=8' 
> > > > '--enable-removal-policies=lru,heap' '--enable-poll' 
> > > > '--enable-digest-pools' '--enable-snmp' '--enable-select' 
> > > > '--enable-carp' '--enable-large-files' '--enable-underscores' 
> > > > '--enable-delay-pools' '--with-filedescriptors=4096' 
> > > > '--with-default-user=proxy' '--enable-cachemgr-hostname=InetAccess' 
> > > > 'build_alias=i486-linux-gnu'
> > > >
> > > > tow versions is installed how i change executable??
> > > >
> > > > i have done some wrong???
> > >
> > > Ah, the package maintainer has changed the squid binary name.
> > >
> > > Try this also:
> > >  mv /usr/sbin/squid3 /usr/sbin/squid3.old
> > >  mv /usr/sbin/squid /usr/sbin/squid3
> > >
> > > (assuming the binary is in /usr/sbin)
> > >
> > > Amos
> > >
> > > > ----- Original Message ----- From: "Amos Jeffries" 
> > > > <squid3@xxxxxxxxxxxxx>
> > > > To: "Enrique" <enrique@xxxxxxxxx>
> > > > Sent: Thursday, January 22, 2009 8:44 PM
> > > > Subject: Re:  Squid 3.0 STABLE 12 is available
> > > >
> > > >
> > > > > Enrique wrote:
> > > > > > hello
> > > > > > i plane to upgrade to version Squid-3.0.STABLE12  o have run 
> > > > > > ./configure then make and  make install whiout version , but whe i 
> > > > > > see version of my squid squid -v say my old version
> > > > > > you can send to me a page or link to help me in my upgrade
> > > > > >
> > > > > > regrard
> > > > >
> > > > > Source is available here:
> > > > >   http://www.squid-cache.org/Versions/v3/3.0/
> > > > >
> > > > > compiling instructions are at:
> > > > >   http://wiki.squid-cache.org/SquidFaq/CompilingSquid
> > > > > each OS is slightly different in its build options and folder layouts. 
> > > > > So finding your OS in the list under 'Building Squid on ...' has 
> > > > > specific details.
> > > > >
> > > > > Using your old squid -v, you can grab the options it was built with.
> > > > >
> > > > > --prefix, --libexecdir, --datadir, --localstatedir, and --sysconfdir 
> > > > > are important to keep the same as already installed version when 
> > > > > installing over the top of an existing version.
> > > > >
> > > > > Amos
> > > > >
> > > > > > ----- Original Message ----- From: "Amos Jeffries" 
> > > > > > <squid3@xxxxxxxxxxxxx>
> > > > > > To: <squid-announce@xxxxxxxxxxxxxxx>; "Squid" 
> > > > > > <squid-users@xxxxxxxxxxxxxxx>
> > > > > > Sent: Wednesday, January 21, 2009 5:07 PM
> > > > > > Subject:  Squid 3.0 STABLE 12 is available
> > > > > >
> > > > > >
> > > > > > > The Squid HTTP Proxy team is pleased to announce the
> > > > > > > availability of the Squid-3.0.STABLE12 release!
> > > > > > >
> > > > > > >
> > > > > > > This release makes two policy changes which have come due and fixes 
> > > > > > > some bugs found in the last release.
> > > > > > >
> > > > > > > Major policy change is to the default setting of 
> > > > > > > half_closed_clients.
> > > > > > > The default is now to have this setting off. The option itself is 
> > > > > > > being retained for accelerator setups which may need it.
> > > > > > >
> > > > > > > Minor policy change is the removal of command line -V option for the 
> > > > > > > Squid binary. This option has been a non-action since Squid-2.6.
> > > > > > >
> > > > > > > Bugs fixed by this release are:
> > > > > > >   - Bug 2533: Solaris (sparc) 64-bit build breaks with gcc/g++
> > > > > > >   - Bug 2542: ICAP filters break download resume
> > > > > > >   - Bug 2556: HTCP fails without icp_port
> > > > > > >   - Bug 2564: logformat '%tl' field not working as advertised
> > > > > > >
> > > > > > >
> > > > > > > Please refer to the release notes at
> > > > > > > http://www.squid-cache.org/Versions/v3/3.0/RELEASENOTES.html
> > > > > > > if and when you are ready to make the switch to Squid-3.
> > > > > > >
> > > > > > > This new release can be downloaded from our HTTP or FTP servers
> > > > > > >
> > > > > > >      http://www.squid-cache.org/Versions/v3/3.0/
> > > > > > >      ftp://ftp.squid-cache.org/pub/squid-3/STABLE/
> > > > > > >
> > > > > > > or the mirrors. For a list of mirror sites see
> > > > > > >
> > > > > > >      http://www.squid-cache.org/Download/http-mirrors.dyn
> > > > > > >      http://www.squid-cache.org/Download/mirrors.dyn
> > > > > > >
> > > > > > > If you encounter any issues with this release please file a bug 
> > > > > > > report.
> > > > > > >      http://bugs.squid-cache.org/
> > > > > > >
> > > > > > >
> > > > > > > Amos Jeffries
> > > > >
> > > > >
> > > > > --
> > > > > Please be using
> > > > >   Current Stable Squid 2.7.STABLE5 or 3.0.STABLE12
> > > > >   Current Beta Squid 3.1.0.3
> > >
> > >
> > > --
> > > Please be using
> > >   Current Stable Squid 2.7.STABLE5 or 3.0.STABLE12
> > >   Current Beta Squid 3.1.0.3
>
>
> --
> Please be using
>   Current Stable Squid 2.7.STABLE5 or 3.0.STABLE12
>   Current Beta Squid 3.1.0.4