fine
thank very much
and sorry again, but if you see in my configure option i have removed the
authentication heper option because many errors related with ldap, pam, a
realy use only digest authentication.
one cuestion i'm not include in configure option any authentication helper
the squid unsoport thats helpers??????
here i include the lasts lines refered wiht 3 errors separeted by
*************************************
Making all in external_acl
make[2]: Entering directory `/root/squid-3.0.STABLE12/helpers/external_acl'
Making all in ip_user
make[3]: Entering directory
`/root/squid-3.0.STABLE12/helpers/external_acl/ip_user'
make[3]: Nothing to be done for `all'.
make[3]: Leaving directory
`/root/squid-3.0.STABLE12/helpers/external_acl/ip_user'
Making all in session
make[3]: Entering directory
`/root/squid-3.0.STABLE12/helpers/external_acl/session'
gcc -DHAVE_CONFIG_H -I. -I. -I../../../include -I. -I../../../include -I../../../include
-Wall -g -O2 -c squid_session.c
squid_session.c:44:20: error: db_185.h: No such file or directory
squid_session.c:51: error: expected '=', ',', ';', 'asm' or '__attribute__'
before '*' token
squid_session.c: In function 'init_db':
squid_session.c:55: error: 'db' undeclared (first use in this function)
squid_session.c:55: error: (Each undeclared identifier is reported only once
squid_session.c:55: error: for each function it appears in.)
squid_session.c:55: warning: implicit declaration of function 'dbopen'
squid_session.c:55: error: 'DB_BTREE' undeclared (first use in this
function)
squid_session.c: In function 'shutdown_db':
squid_session.c:64: error: 'db' undeclared (first use in this function)
squid_session.c: In function 'session_active':
squid_session.c:71: error: 'DBT' undeclared (first use in this function)
squid_session.c:71: error: expected ';' before 'key'
squid_session.c:72: error: 'key' undeclared (first use in this function)
squid_session.c:74: error: 'db' undeclared (first use in this function)
squid_session.c:74: error: 'data' undeclared (first use in this function)
squid_session.c: In function 'session_login':
squid_session.c:90: error: 'DBT' undeclared (first use in this function)
squid_session.c:90: error: expected ';' before 'key'
squid_session.c:92: error: 'key' undeclared (first use in this function)
squid_session.c:94: error: 'data' undeclared (first use in this function)
squid_session.c:96: error: 'db' undeclared (first use in this function)
squid_session.c: In function 'session_logout':
squid_session.c:101: error: 'DBT' undeclared (first use in this function)
squid_session.c:101: error: expected ';' before 'key'
squid_session.c:102: error: 'key' undeclared (first use in this function)
squid_session.c:104: error: 'db' undeclared (first use in this function)
make[3]: *** [squid_session.o] Error 1
make[3]: Leaving directory
`/root/squid-3.0.STABLE12/helpers/external_acl/session'
make[2]: *** [all-recursive] Error 1
make[2]: Leaving directory `/root/squid-3.0.STABLE12/helpers/external_acl'
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory `/root/squid-3.0.STABLE12/helpers'
make: *** [all-recursive] Error 1
**************************************************************
Making all in NCSA
make[3]: Entering directory
`/root/squid-3.0.STABLE12/helpers/basic_auth/NCSA'
cc -DHAVE_CONFIG_H -I. -I. -I../../../include -I../../../include -g -c
ncsa_auth.c
cc -DHAVE_CONFIG_H -I. -I. -I../../../include -I../../../include -g -c
crypt_md5.c
/bin/sh ../../../libtool --tag=CC --mode=link cc -g -g -o ncsa_auth
ncsa_auth.o
crypt_md5.o -L../../../lib -lmiscutil -lcrypt -lpthread -lm -lresolv -lnsl
mkdir .libs
cc -g -g -o ncsa_auth ncsa_auth.o
rypt_md5.o -L/root/squid-3.0.STABLE12/lib -lmiscutil -lcrypt -lpthread -lm
-lresolv -lnsl
make[3]: Leaving directory
`/root/squid-3.0.STABLE12/helpers/basic_auth/NCSA'
Making all in PAM
make[3]: Entering directory
`/root/squid-3.0.STABLE12/helpers/basic_auth/PAM'
cc -DHAVE_CONFIG_H -I. -I. -I../../../include -I../../../include -g -c
pam_auth.c
pam_auth.c:76:31: error: security/pam_appl.h: No such file or directory
pam_auth.c:100: warning: 'struct pam_response' declared inside parameter
list
pam_auth.c:100: warning: its scope is only this definition or declaration,
which is probably not what you want
pam_auth.c:100: warning: 'struct pam_message' declared inside parameter list
pam_auth.c: In function 'password_conversation':
pam_auth.c:102: error: dereferencing pointer to incomplete type
pam_auth.c:102: error: 'PAM_PROMPT_ECHO_OFF' undeclared (first use in this
function)
pam_auth.c:102: error: (Each undeclared identifier is reported only once
pam_auth.c:102: error: for each function it appears in.)
pam_auth.c:103: error: dereferencing pointer to incomplete type
pam_auth.c:103: error: dereferencing pointer to incomplete type
pam_auth.c:104: error: 'PAM_CONV_ERR' undeclared (first use in this
function)
pam_auth.c:116: error: invalid application of 'sizeof' to incomplete type
'struct pam_response'
pam_auth.c:121: error: invalid use of undefined type 'struct pam_response'
pam_auth.c:121: error: dereferencing pointer to incomplete type
pam_auth.c:122: error: invalid use of undefined type 'struct pam_response'
pam_auth.c:122: error: dereferencing pointer to incomplete type
pam_auth.c:124: error: invalid use of undefined type 'struct pam_response'
pam_auth.c:124: error: dereferencing pointer to incomplete type
pam_auth.c:124: error: 'PAM_SUCCESS' undeclared (first use in this function)
pam_auth.c: At top level:
pam_auth.c:127: error: variable 'conv' has initializer but incomplete type
pam_auth.c:129: warning: excess elements in struct initializer
pam_auth.c:129: warning: (near initialization for 'conv')
pam_auth.c:131: warning: excess elements in struct initializer
pam_auth.c:131: warning: (near initialization for 'conv')
pam_auth.c: In function 'main':
pam_auth.c:148: error: 'pam_handle_t' undeclared (first use in this
function)
pam_auth.c:148: error: 'pamh' undeclared (first use in this function)
pam_auth.c:149: error: 'PAM_SUCCESS' undeclared (first use in this function)
pam_auth.c:207: error: invalid use of undefined type 'struct pam_conv'
pam_auth.c:237: error: 'PAM_USER' undeclared (first use in this function)
pam_auth.c:239: error: 'PAM_CONV' undeclared (first use in this function)
make[3]: *** [pam_auth.o] Error 1
make[3]: Leaving directory `/root/squid-3.0.STABLE12/helpers/basic_auth/PAM'
make[2]: *** [all-recursive] Error 1
make[2]: Leaving directory `/root/squid-3.0.STABLE12/helpers/basic_auth'
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory `/root/squid-3.0.STABLE12/helpers'
make: *** [all-recursive] Error 1
***************************************************************************************************************************
make[3]: Entering directory
`/root/squid-3.0.STABLE12/helpers/external_acl/ldap_group'
gcc -DHAVE_CONFIG_H -I. -I. -I../../../include -I. -I../../../include -I../../../include
-Wall -g -O2 -c squid_ldap_group.c
squid_ldap_group.c:74:18: error: lber.h: No such file or directory
squid_ldap_group.c:75:18: error: ldap.h: No such file or directory
squid_ldap_group.c:95: error: 'LDAP_SCOPE_SUBTREE' undeclared here (not in a
function)
squid_ldap_group.c:99: error: 'LDAP_DEREF_NEVER' undeclared here (not in a
function)
squid_ldap_group.c:105: error: 'LDAP_NO_LIMIT' undeclared here (not in a
function)
squid_ldap_group.c:113: error: expected ')' before '*' token
squid_ldap_group.c:168: error: expected ')' before '*' token
squid_ldap_group.c:173: error: expected ')' before '*' token
squid_ldap_group.c:178: error: expected ')' before '*' token
squid_ldap_group.c:186: error: expected ')' before '*' token
squid_ldap_group.c:191: error: expected ')' before '*' token
squid_ldap_group.c: In function 'main':
squid_ldap_group.c:215: error: 'LDAP' undeclared (first use in this
function)
squid_ldap_group.c:215: error: (Each undeclared identifier is reported only
once
squid_ldap_group.c:215: error: for each function it appears in.)
squid_ldap_group.c:215: error: 'ld' undeclared (first use in this function)
squid_ldap_group.c:217: error: 'LDAP_PORT' undeclared (first use in this
function)
squid_ldap_group.c:285: error: 'LDAP_SCOPE_BASE' undeclared (first use in
this function)
squid_ldap_group.c:287: error: 'LDAP_SCOPE_ONELEVEL' undeclared (first use
in this function)
squid_ldap_group.c:315: error: 'LDAP_DEREF_ALWAYS' undeclared (first use in
this function)
squid_ldap_group.c:317: error: 'LDAP_DEREF_SEARCHING' undeclared (first use
in this function)
squid_ldap_group.c:319: error: 'LDAP_DEREF_FINDING' undeclared (first use in
this function)
squid_ldap_group.c:523: warning: implicit declaration of function 'ldap_init'
squid_ldap_group.c:528: warning: implicit declaration of function
'squid_ldap_set_connect_timeout'
squid_ldap_group.c:558: warning: implicit declaration of function
'squid_ldap_set_timelimit'
squid_ldap_group.c:559: warning: implicit declaration of function
'squid_ldap_set_referrals'
squid_ldap_group.c:560: warning: implicit declaration of function
'squid_ldap_set_aliasderef'
squid_ldap_group.c:562: warning: implicit declaration of function
'ldap_simple_bind_s'
squid_ldap_group.c:563: error: 'LDAP_SUCCESS' undeclared (first use in this
function)
squid_ldap_group.c:564: warning: implicit declaration of function
'ldap_err2string'
squid_ldap_group.c:564: warning: format '%s' expects type 'char *', but
argument 3 has type 'int'
squid_ldap_group.c:565: warning: implicit declaration of function
'ldap_unbind'
squid_ldap_group.c:573: warning: implicit declaration of function
'searchLDAP'
squid_ldap_group.c:593: warning: implicit declaration of function
'squid_ldap_errno'
squid_ldap_group.c:593: error: 'LDAP_INVALID_CREDENTIALS' undeclared (first
use in this function)
squid_ldap_group.c: At top level:
squid_ldap_group.c:686: error: expected ')' before '*' token
squid_ldap_group.c:736: error: expected ')' before '*' token
make[3]: *** [squid_ldap_group.o] Error 1
make[3]: Leaving directory
`/root/squid-3.0.STABLE12/helpers/external_acl/ldap_group'
make[2]: *** [all-recursive] Error 1
make[2]: Leaving directory `/root/squid-3.0.STABLE12/helpers/external_acl'
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory `/root/squid-3.0.STABLE12/helpers'
----- Original Message -----
From: "Amos Jeffries" <squid3@xxxxxxxxxxxxx>
To: "Enrique" <enrique@xxxxxxxxx>
Sent: Friday, January 23, 2009 10:07 AM
Subject: Re: Squid 3.0 STABLE 12 is available
Enrique wrote:
hello
escusesme before all
i done as you say, end recive build Build Successful, but when i make
squid3 -v it show
Squid Cache: Version 3.0.PRE5
configure options: '--build=i486-linux-gnu' '--prefix=/usr'
'--includedir=${prefix}/include' '--mandir=${prefix}/share/man'
'--infodir=${prefix}/share/info' '--sysconfdir=/etc'
'--localstatedir=/var' '--libexecdir=${prefix}/lib/squid3'
'--disable-maintainer-mode' '--disable-dependency-tracking' '--srcdir=.'
'--datadir=/usr/share/squid3' '--sysconfdir=/etc/squid3'
'--mandir=/usr/share/man' '--with-cppunit-basedir=/usr' '--enable-inline'
'--enable-async-io=8' '--enable-storeio=ufs,aufs,coss'
'--enable-diskio=AIO,Blocking,DiskDaemon,DiskThreads'
'--enable-removal-policies=lru,heap' '--enable-poll'
'--enable-digest-pools' '--enable-snmp' '--enable-htcp' '--enable-select'
'--enable-carp' '--enable-large-files' '--enable-underscores'
'--enable-auth=basic,digest,ntlm'
'--enable-basic-auth-helpers=LDAP,MSNT,NCSA,PAM,SASL,SMB,YP,getpwnam,multi-domain-NTLM'
'--enable-ntlm-auth-helpers=SMB'
'--enable-digest-auth-helpers=ldap,password'
'--enable-external-acl-helpers=ip_user,ldap_group,session,unix_group,wbinfo_group'
'--with-filedescriptors=4096' '--enable-epoll' '--enable-linux-netfilter'
'CC=cc' 'CFLAGS=-g -Wall -O2' 'CPPFLAGS=' 'CXXFLAGS=-g -Wall -O2'
'CXX=g++' 'LDFLAGS=' 'build_alias=i486-linux-gnu'
and when i put squid -v it show me:
configure options: '--build=i486-linux-gnu' '--prefix=/usr'
'--includedir=/include' '--mandir=/share/man' '--infodir=/share/info'
'--sysconfdir=/etc' '--localstatedir=/var' '--libexecdir=/lib/squid3'
'--srcdir=.' '--datadir=/usr/share/squid3' '--sysconfdir=/etc/squid3'
'--mandir=/usr/share/man' '--with-cppunit-basedir=/usr' '--enable-inline'
'--enable-async-io=8' '--enable-removal-policies=lru,heap'
'--enable-poll' '--enable-digest-pools' '--enable-snmp' '--enable-select'
'--enable-carp' '--enable-large-files' '--enable-underscores'
'--enable-delay-pools' '--with-filedescriptors=4096'
'--with-default-user=proxy' '--enable-cachemgr-hostname=InetAccess'
'build_alias=i486-linux-gnu'
tow versions is installed how i change executable??
i have done some wrong???
Ah, the package maintainer has changed the squid binary name.
Try this also:
mv /usr/sbin/squid3 /usr/sbin/squid3.old
mv /usr/sbin/squid /usr/sbin/squid3
(assuming the binary is in /usr/sbin)
Amos
----- Original Message ----- From: "Amos Jeffries" <squid3@xxxxxxxxxxxxx>
To: "Enrique" <enrique@xxxxxxxxx>
Sent: Thursday, January 22, 2009 8:44 PM
Subject: Re: Squid 3.0 STABLE 12 is available
Enrique wrote:
hello
i plane to upgrade to version Squid-3.0.STABLE12 o have run
./configure then make and make install whiout version , but whe i see
version of my squid squid -v say my old version
you can send to me a page or link to help me in my upgrade
regrard
Source is available here:
http://www.squid-cache.org/Versions/v3/3.0/
compiling instructions are at:
http://wiki.squid-cache.org/SquidFaq/CompilingSquid
each OS is slightly different in its build options and folder layouts.
So finding your OS in the list under 'Building Squid on ...' has
specific details.
Using your old squid -v, you can grab the options it was built with.
--prefix, --libexecdir, --datadir, --localstatedir, and --sysconfdir are
important to keep the same as already installed version when installing
over the top of an existing version.
Amos
----- Original Message ----- From: "Amos Jeffries"
<squid3@xxxxxxxxxxxxx>
To: <squid-announce@xxxxxxxxxxxxxxx>; "Squid"
<squid-users@xxxxxxxxxxxxxxx>
Sent: Wednesday, January 21, 2009 5:07 PM
Subject: Squid 3.0 STABLE 12 is available
The Squid HTTP Proxy team is pleased to announce the
availability of the Squid-3.0.STABLE12 release!
This release makes two policy changes which have come due and fixes
some bugs found in the last release.
Major policy change is to the default setting of half_closed_clients.
The default is now to have this setting off. The option itself is
being retained for accelerator setups which may need it.
Minor policy change is the removal of command line -V option for the
Squid binary. This option has been a non-action since Squid-2.6.
Bugs fixed by this release are:
- Bug 2533: Solaris (sparc) 64-bit build breaks with gcc/g++
- Bug 2542: ICAP filters break download resume
- Bug 2556: HTCP fails without icp_port
- Bug 2564: logformat '%tl' field not working as advertised
Please refer to the release notes at
http://www.squid-cache.org/Versions/v3/3.0/RELEASENOTES.html
if and when you are ready to make the switch to Squid-3.
This new release can be downloaded from our HTTP or FTP servers
http://www.squid-cache.org/Versions/v3/3.0/
ftp://ftp.squid-cache.org/pub/squid-3/STABLE/
or the mirrors. For a list of mirror sites see
http://www.squid-cache.org/Download/http-mirrors.dyn
http://www.squid-cache.org/Download/mirrors.dyn
If you encounter any issues with this release please file a bug
report.
http://bugs.squid-cache.org/
Amos Jeffries
--
Please be using
Current Stable Squid 2.7.STABLE5 or 3.0.STABLE12
Current Beta Squid 3.1.0.3
--
Please be using
Current Stable Squid 2.7.STABLE5 or 3.0.STABLE12
Current Beta Squid 3.1.0.3
