On 1/19/09, sameer shinde <s9sameer@xxxxxxxxx> wrote: > On 1/18/09, Amos Jeffries <squid3@xxxxxxxxxxxxx> wrote: > > sameer shinde wrote: > > > > > On Sat, Jan 17, 2009 at 4:26 PM, Amos Jeffries <squid3@xxxxxxxxxxxxx> > > wrote: > > > > > > > > > > By the sounds of it you need to open CONNECT access to that port. > > > > Safe_ports by itself is not quite enough. > > > > > > > > Amos > > > > > > > > > > the default acl CONNECT method CONNECT is working there. I'm just > > > adding some more ports into the acl list > > > so that I can use some more ports. Isn't that sufficient? If No, then > > > how to open the CONNECT access. > > > (anyways I'm googling for it) > > > > > > - Sameer. > > > > > > > Is uses SSL_ports, not the Safe_ports. I expect 210 is needed in both lists. > > > I've added the port 210 in SSL_ports list & reconfigured/ restarted > squid3, but still i'm not able to access the site from application. > > Can you tell me where am I going wrong? > my entry in squid.conf for SSL port is as follows > acl SSL_ports port 210 >
