You appear to have misunderstood Christos.
A he said...
* You define a service_1
* You permit access to class_1
But in the config you stated, never link the two.... so Squid has
nothing to work with when checking who has access to the service.
If you still think this advice is wrong, please re-state ALL of your
icap_* lines, exactly as they appear in squid.conf.
Amos
Shailesh Mishra wrote:
Hi,
Can someone please throw some light to this issue?
Everything works fine with ICAP disabled ( commented in squid.conf
file), as soon as it is turned on the browser remains in hung state.
Thanks in advance,
Shailesh
-----Original Message-----
From: Shailesh Mishra [mailto:shailesh_mishra@xxxxxxxxxxxx]
Sent: Wednesday, December 10, 2008 9:31 AM
To: Shailesh Mishra; Christos Tsantilas
Cc: squid-users@xxxxxxxxxxxxxxx
Subject: RE: Problem accessing web with ICAP enabled.
Hi,
While browsing through the bugzilla database I found a similar reported
problem where web browser is in hung state when ICAP is enabled.
Any help here will be highly appreciated!
Regards,
Shailesh
-----Original Message-----
From: Shailesh Mishra
Sent: Saturday, December 06, 2008 3:13 PM
To: Christos Tsantilas
Cc: squid-users@xxxxxxxxxxxxxxx
Subject: RE: Problem accessing web with ICAP enabled.
Hi Christos,
I missed out on mentioning that part in my previous mail
But " icap_access class_1 allow all" is already there in my squid
configuration file.
JFYI, the browser does not respond and remains in hung state in this
scenario.
Regards,
Shailesh
-----Original Message-----
From: Christos Tsantilas [mailto:christos@xxxxxxxxxxxx]
Sent: Saturday, December 06, 2008 1:57 AM
To: Shailesh Mishra
Cc: squid-users@xxxxxxxxxxxxxxx
Subject: Re: Problem accessing web with ICAP enabled.
Hi Shailesh,
Shailesh Mishra wrote:
Hi ,
I have a SQUID 3.0 installation on Linux acting as a proxy. Everything
was working fine but when I enabled the ICAP service I am unable to
access web pages.
ICAP server here is a scanning software which is running fine and
taking
request (checked manually w/o squid).
My squid.conf file looks something like this :
------------------------------------------------------------------------
---------------------------
icap_enable on
icap_service service_1 respmod_precache 0
icap://10.217.65.62:1344/avscanresp
icap_access class_1 allow all
missing an icap_class configuration parameter eg:
icap_class class_1 service_1
Regards,
Christos
------------------------------------------------------------------------
---------------------------
Am I missing something here?
If I comment out the icap tags things work perfectly fine.
Thanks in advance,
Shailesh
--
Please be using
Current Stable Squid 2.7.STABLE5 or 3.0.STABLE10
Current Beta Squid 3.1.0.3 or 3.0.STABLE11-RC1
