Hi Dadashi, Try compile polygraph version 3.1.5 ok? Marcos 2008/8/26 <t.dadashi@xxxxxxxxx>: > Im sending the errors that i faced while I was trying to install web polygraph: > > > > > last lines after ./configure : > > > config.status: creating src/tools/Makefile > config.status: creating src/probe/Makefile > config.status: creating src/monitor/Makefile > config.status: creating tools/Makefile > config.status: creating tools/ReportGen/Makefile > config.status: creating tools/ReportGen/reportgen.cfg > config.status: creating workloads/Makefile > config.status: creating workloads/include/Makefile > config.status: creating config.h > config.status: config.h is unchanged > > > > > > this is the "make" command output: > > > [root@localhost polygraph-2.8.1]# make > make[1]: Entering directory `/polygraph/polygraph-2.8.1/src' > make[2]: Entering directory `/polygraph/polygraph-2.8.1/src/app' > make[2]: Nothing to be done for `all'. > make[2]: Leaving directory `/polygraph/polygraph-2.8.1/src/app' > make[2]: Entering directory `/polygraph/polygraph-2.8.1/src/base' > make[2]: Nothing to be done for `all'. > make[2]: Leaving directory `/polygraph/polygraph-2.8.1/src/base' > make[2]: Entering directory `/polygraph/polygraph-2.8.1/src/beep' > make[2]: Nothing to be done for `all'. > make[2]: Leaving directory `/polygraph/polygraph-2.8.1/src/beep' > make[2]: Entering directory `/polygraph/polygraph-2.8.1/src/cache' > make[2]: Nothing to be done for `all'. > make[2]: Leaving directory `/polygraph/polygraph-2.8.1/src/cache' > make[2]: Entering directory `/polygraph/polygraph-2.8.1/src/dns' > make[2]: Nothing to be done for `all'. > make[2]: Leaving directory `/polygraph/polygraph-2.8.1/src/dns' > make[2]: Entering directory `/polygraph/polygraph-2.8.1/src/icp' > make[2]: Nothing to be done for `all'. > make[2]: Leaving directory `/polygraph/polygraph-2.8.1/src/icp' > make[2]: Entering directory `/polygraph/polygraph-2.8.1/src/runtime' > g++ -o ExpPortMgr.o -c ExpPortMgr.cc -g -O1 -Wall -Wwrite-strings -Woverloaded-v > irtual -I../.. -I.. -DHAVE_CONFIG_H > In file included from /usr/lib/gcc/i386-redhat-linux/4.1.2/../../../../include/c > ++/4.1.2/backward/iostream.h:31, > from ../xstd/h/iostream.h:17, > from ../xstd/Size.h:13, > from ../base/polygraph.h:22, > from ExpPortMgr.cc:10: > /usr/lib/gcc/i386-redhat-linux/4.1.2/../../../../include/c++/4.1.2/backward/back > ward_warning.h:32:2: warning: #warning This file includes at least one deprecate > d or antiquated header. Please consider using one of the 32 headers found in sec > tion 17.4.1.2 of the C++ standard. Examples include substituting the <X> header > for the <X.h> header for C++ includes, or <iostream> instead of the deprecated h > eader <iostream.h>. To disable this warning use -Wno-deprecated. > ../xstd/Ring.h: In member function 'void Ring<Item>::resize(int) [with Item = in > t]': > ExpPortMgr.cc:62: instantiated from here > ../xstd/Ring.h:74: error: invalid conversion from 'const int' to 'void*' > ../xstd/Ring.h:74: error: initializing argument 1 of 'void* memmove(void*, con > st void*, size_t)' > ../xstd/Ring.h:76: warning: null argument where non-null required (argument 1) > ../xstd/Ring.h:76: warning: null argument where non-null required (argument 1) > make[2]: *** [ExpPortMgr.o] Error 1 > make[2]: Leaving directory `/polygraph/polygraph-2.8.1/src/runtime' > make[2]: Entering directory `/polygraph/polygraph-2.8.1/src/xml' > make[2]: Nothing to be done for `all'. > make[2]: Leaving directory `/polygraph/polygraph-2.8.1/src/xml' > make[2]: Entering directory `/polygraph/polygraph-2.8.1/src/xparser' > make[2]: Nothing to be done for `all'. > make[2]: Leaving directory `/polygraph/polygraph-2.8.1/src/xparser' > make[2]: Entering directory `/polygraph/polygraph-2.8.1/src/xstd' > make[3]: Entering directory `/polygraph/polygraph-2.8.1/src/xstd/h' > make[4]: Entering directory `/polygraph/polygraph-2.8.1/src/xstd/h/net' > make[4]: Nothing to be done for `all'. > make[4]: Leaving directory `/polygraph/polygraph-2.8.1/src/xstd/h/net' > make[4]: Entering directory `/polygraph/polygraph-2.8.1/src/xstd/h/sys' > make[4]: Nothing to be done for `all'. > make[4]: Leaving directory `/polygraph/polygraph-2.8.1/src/xstd/h/sys' > make[3]: Leaving directory `/polygraph/polygraph-2.8.1/src/xstd/h' > make[2]: Leaving directory `/polygraph/polygraph-2.8.1/src/xstd' > make[2]: Entering directory `/polygraph/polygraph-2.8.1/src/logextractors' > g++ -o ltrace.o -c ltrace.cc -g -O1 -Wall -Wwrite-strings -Woverloaded-virtual - > I../.. -I.. -DHAVE_CONFIG_H > In file included from /usr/lib/gcc/i386-redhat-linux/4.1.2/../../../../include/c > ++/4.1.2/backward/iostream.h:31, > from ../xstd/h/iostream.h:17, > from ../xstd/Size.h:13, > from ../base/polygraph.h:22, > from ltrace.cc:10: > /usr/lib/gcc/i386-redhat-linux/4.1.2/../../../../include/c++/4.1.2/backward/back > ward_warning.h:32:2: warning: #warning This file includes at least one deprecate > d or antiquated header. Please consider using one of the 32 headers found in sec > tion 17.4.1.2 of the C++ standard. Examples include substituting the <X> header > for the <X.h> header for C++ includes, or <iostream> instead of the deprecated h > eader <iostream.h>. To disable this warning use -Wno-deprecated. > ../xstd/Ring.h: In member function 'void Ring<Item>::resize(int) [with Item = Tr > aceIntvlRec]': > ltrace.cc:256: instantiated from here > ../xstd/Ring.h:74: error: invalid conversion from 'const int' to 'void*' > ../xstd/Ring.h:74: error: initializing argument 1 of 'void* memmove(void*, con > st void*, size_t)' > ../xstd/Ring.h:76: warning: null argument where non-null required (argument 1) > ../xstd/Ring.h:76: warning: null argument where non-null required (argument 1) > make[2]: *** [ltrace.o] Error 1 > make[2]: Leaving directory `/polygraph/polygraph-2.8.1/src/logextractors' > make[2]: Entering directory `/polygraph/polygraph-2.8.1/src/loganalyzers' > g++ -o reporter.o -c reporter.cc -g -O1 -Wall -Wwrite-strings -Woverloaded-virtu > al -I../.. -I.. -DHAVE_CONFIG_H > In file included from /usr/lib/gcc/i386-redhat-linux/4.1.2/../../../../include/c > ++/4.1.2/backward/iostream.h:31, > from ../xstd/h/iostream.h:17, > from ../xstd/Size.h:13, > from ../base/polygraph.h:22, > from reporter.cc:10: > /usr/lib/gcc/i386-redhat-linux/4.1.2/../../../../include/c++/4.1.2/backward/back > ward_warning.h:32:2: warning: #warning This file includes at least one deprecate > d or antiquated header. Please consider using one of the 32 headers found in sec > tion 17.4.1.2 of the C++ standard. Examples include substituting the <X> header > for the <X.h> header for C++ includes, or <iostream> instead of the deprecated h > eader <iostream.h>. To disable this warning use -Wno-deprecated. > ../loganalyzers/RepToHtmlFile.h:48: error: extra qualification 'RepToHtmlFile::' > on member 'relativeUrl' > make[2]: *** [reporter.o] Error 1 > make[2]: Leaving directory `/polygraph/polygraph-2.8.1/src/loganalyzers' > make[2]: Entering directory `/polygraph/polygraph-2.8.1/src/monitor' > g++ -o polymon \ > polymon.o ../runtime/libruntime.a ../base/libbase.a ../xstd/libx > std.a -lncurses \ > -lssl -lcrypto -lm -lnsl > g++: ../runtime/libruntime.a: No such file or directory > make[2]: *** [polymon] Error 1 > make[2]: Leaving directory `/polygraph/polygraph-2.8.1/src/monitor' > make[2]: Entering directory `/polygraph/polygraph-2.8.1/src/pgl' > make[2]: Nothing to be done for `all'. > make[2]: Leaving directory `/polygraph/polygraph-2.8.1/src/pgl' > make[2]: Entering directory `/polygraph/polygraph-2.8.1/src/csm' > g++ -o cdb \ > cdb.o libcsm.a ../runtime/libruntime.a ../pgl/libpgl.a ../xparse > r/libxparser.a ../base/libbase.a ../xstd/libxstd.a \ > -lssl -lcrypto -lm -lnsl > g++: ../runtime/libruntime.a: No such file or directory > make[2]: *** [cdb] Error 1 > make[2]: Leaving directory `/polygraph/polygraph-2.8.1/src/csm' > make[2]: Entering directory `/polygraph/polygraph-2.8.1/src/client' > g++ -o CltCfg.o -c CltCfg.cc -g -O1 -Wall -Wwrite-strings -Woverloaded-virtual - > I../.. -I.. -DHAVE_CONFIG_H > In file included from /usr/lib/gcc/i386-redhat-linux/4.1.2/../../../../include/c > ++/4.1.2/backward/iostream.h:31, > from ../xstd/h/iostream.h:17, > from ../xstd/Size.h:13, > from ../base/polygraph.h:22, > from CltCfg.cc:10: > /usr/lib/gcc/i386-redhat-linux/4.1.2/../../../../include/c++/4.1.2/backward/back > ward_warning.h:32:2: warning: #warning This file includes at least one deprecate > d or antiquated header. Please consider using one of the 32 headers found in sec > tion 17.4.1.2 of the C++ standard. Examples include substituting the <X> header > for the <X.h> header for C++ includes, or <iostream> instead of the deprecated h > eader <iostream.h>. To disable this warning use -Wno-deprecated. > ../xstd/Ring.h: In member function 'void Ring<Item>::resize(int) [with Item = Ne > tAddr*]': > CltCfg.cc:250: instantiated from here > ../xstd/Ring.h:74: error: invalid conversion from 'const int' to 'void*' > ../xstd/Ring.h:74: error: initializing argument 1 of 'void* memmove(void*, con > st void*, size_t)' > ../xstd/Ring.h:76: warning: null argument where non-null required (argument 1) > ../xstd/Ring.h:76: warning: null argument where non-null required (argument 1) > ../xstd/Ring.h: In member function 'void Ring<Item>::resize(int) [with Item = St > ring*]': > CltCfg.cc:263: instantiated from here > ../xstd/Ring.h:74: error: invalid conversion from 'const int' to 'void*' > ../xstd/Ring.h:74: error: initializing argument 1 of 'void* memmove(void*, con > st void*, size_t)' > ../xstd/Ring.h:76: warning: null argument where non-null required (argument 1) > ../xstd/Ring.h:76: warning: null argument where non-null required (argument 1) > make[2]: *** [CltCfg.o] Error 1 > make[2]: Leaving directory `/polygraph/polygraph-2.8.1/src/client' > make[2]: Entering directory `/polygraph/polygraph-2.8.1/src/probe' > g++ -o polyprobe \ > PolyProbe.o ProbeOpts.o ProbeClt.o ProbeSrv.o ProbeAgent.o Probe > Xact.o ProbeCltXact.o ProbeSrvXact.o ProbeLinkStat.o ProbeStatMgr.o ../runtime/l > ibruntime.a ../pgl/libpgl.a ../xparser/libxparser.a ../base/libbase.a ../xstd/li > bxstd.a \ > -lssl -lcrypto -lm -lnsl > g++: ../runtime/libruntime.a: No such file or directory > make[2]: *** [polyprobe] Error 1 > make[2]: Leaving directory `/polygraph/polygraph-2.8.1/src/probe' > make[2]: Entering directory `/polygraph/polygraph-2.8.1/src/server' > g++ -o polysrv \ > PolySrv.o libsrvside.a ../app/libapp.a ../runtime/libagent.a ../ > runtime/libruntime.a ../pgl/libpgl.a ../xparser/libxparser.a ../csm/libcsm.a ../ > beep/libbeep.a ../xml/libxml.a ../base/libbase.a ../xstd/libxstd.a \ > -lssl -lcrypto -lm -lnsl > g++: ../runtime/libagent.a: No such file or directory > g++: ../runtime/libruntime.a: No such file or directory > make[2]: *** [polysrv] Error 1 > make[2]: Leaving directory `/polygraph/polygraph-2.8.1/src/server' > make[2]: Entering directory `/polygraph/polygraph-2.8.1/src/proxy' > g++ -o polypxy \ > PxyCltXact.o PxySrvXact.o PolyPxy.o ../client/libcltside.a ../se > rver/libsrvside.a ../app/libapp.a ../dns/libdns.a ../icp/libicp.a ../beep/libbee > p.a ../cache/libcache.a ../runtime/libagent.a ../runtime/libruntime.a ../pgl/lib > pgl.a ../xparser/libxparser.a ../csm/libcsm.a ../xml/libxml.a ../base/libbase.a > ../xstd/libxstd.a \ > -lssl -lcrypto -lm -lnsl > g++: ../client/libcltside.a: No such file or directory > g++: ../runtime/libagent.a: No such file or directory > g++: ../runtime/libruntime.a: No such file or directory > make[2]: *** [polypxy] Error 1 > make[2]: Leaving directory `/polygraph/polygraph-2.8.1/src/proxy' > make[2]: Entering directory `/polygraph/polygraph-2.8.1/src/tools' > make[2]: Nothing to be done for `all'. > make[2]: Leaving directory `/polygraph/polygraph-2.8.1/src/tools' > make[1]: Leaving directory `/polygraph/polygraph-2.8.1/src' > make[1]: Entering directory `/polygraph/polygraph-2.8.1/workloads' > make[2]: Entering directory `/polygraph/polygraph-2.8.1/workloads/include' > make[2]: Nothing to be done for `all'. > make[2]: Leaving directory `/polygraph/polygraph-2.8.1/workloads/include' > make[1]: Leaving directory `/polygraph/polygraph-2.8.1/workloads' > make[1]: Entering directory `/polygraph/polygraph-2.8.1/tools' > make[2]: Entering directory `/polygraph/polygraph-2.8.1/tools/ReportGen' > make[2]: Nothing to be done for `all'. > make[2]: Leaving directory `/polygraph/polygraph-2.8.1/tools/ReportGen' > make[2]: Entering directory `/polygraph/polygraph-2.8.1/tools/ReportGen' > make[2]: Nothing to be done for `all'. > make[2]: Leaving directory `/polygraph/polygraph-2.8.1/tools/ReportGen' > make[1]: Leaving directory `/polygraph/polygraph-2.8.1/tools' > > > > Regards, > t.dadashi > > On 8/25/08, Marcos Dutra <macdutra@xxxxxxxxx> wrote: >> Hi, >> >> I cannot find polygraph rpm in the rpmfind, but if you install all >> libraries, should't appear any error in your install. Post ./configure >> output ok? >> >> Regards. >> Marcos >> >> 2008/8/23 <t.dadashi@xxxxxxxxx>: >>> hi! >>> can you give me a link >>> for rpm polygraph,or a release >>> that can be configured without errors?! >>> (i tried http://www.web-polygraph.org/downloads/ >>> but these can not be configured without errors, >>> ./configure) >>> >>> :( >>> >>> >>> On 8/12/08, Marcos Dutra <macdutra@xxxxxxxxx> wrote: >>>> Hi Dadashi, well I look for webstone and I think this will test only >>>> connection for apache server for example, for this test my suggestion >>>> is apache's ab. >>>> Well about polygraph, for begginers is very dificult really, but is >>>> powerful for squid benchmark. >>>> Look this schema for polygraph. >>>> >>>> 1 - workload >>>> >>>> Bellow workload for simple test. You should modify parameters >>>> max_host_load and max_agent_load. In my tests I use loopback interface >>>> to running in same server. >>>> >>>> Bench benchPolyMix3 = { >>>> peak_req_rate = undef(); >>>> client_side = { >>>> max_host_load = 100/sec; >>>> max_agent_load = 0.4/sec; >>>> addr_mask = '10.1.0.0'; >>>> }; >>>> server_side = { >>>> max_host_load = client_side.max_host_load; >>>> max_agent_load = client_side.max_agent_load; >>>> addr_mask = '10.1.0.0:80'; >>>> }; >>>> }; >>>> >>>> Bench benchWebAxe4 = { >>>> client_side = { >>>> max_host_load = 100/sec; >>>> max_agent_load = 0.15/sec; >>>> addr_space = ['lo::10.1.0-123.1-250/18']; >>>> }; >>>> server_side = { >>>> max_host_load = client_side.max_host_load; >>>> max_agent_load = max_host_load; >>>> }; >>>> }; >>>> >>>> Bench benchPolyMix4 = { >>>> client_side = { >>>> max_host_load = 100/sec; >>>> max_agent_load = 0.15/sec; >>>> addr_space = ['lo::10.1.0-123.1-250/18']; >>>> }; >>>> >>>> server_side = { >>>> max_host_load = client_side.max_host_load; >>>> max_agent_load = undef(); >>>> addr_space = ['lo::10.1.0-123.1-250:80/18']; >>>> }; >>>> }; >>>> >>>> PolyMix3As asPolyMix3; >>>> >>>> PolyMix4As asPolyMix4 = { >>>> agents_per_addr = 1; >>>> }; >>>> >>>> WebAxe4As asWebAxe4 = { >>>> agents_per_addr = 2; >>>> }; >>>> >>>> SrvLb4As asNoLb_L4_4 = { >>>> agents_per_addr = 1; >>>> }; >>>> >>>> SrvLb4As asSrvLb_L4_4 = { >>>> agents_per_addr = 1; >>>> }; >>>> >>>> SrvLb4As asSrvLb_L7_4 = { >>>> agents_per_addr = 1; >>>> }; >>>> >>>> Bench TheBench = benchPolyMix4; >>>> >>>> TheBench = { >>>> client_side = { >>>> addr_space = ['lo::10.1.0-123.1-250/18']; >>>> hosts = ['127.0.0.1']; >>>> }; >>>> server_side = { >>>> addr_space = ['lo::10.1.0-123.1-250:80/18']; >>>> hosts = ['127.0.0.1']; >>>> }; >>>> }; >>>> >>>> TheBench.peak_req_rate = 100/sec; >>>> >>>> rate FillRate = (95%*TheBench.peak_req_rate); >>>> >>>> size ProxyCacheSize = 12GB; >>>> >>>> DnsResolver Resolver; >>>> >>>> Resolver.servers = ['localhost:53']; >>>> >>>> ObjLifeCycle olcStatic = { >>>> length = const(2year); >>>> variance = 0%; >>>> with_lmt = 100%; >>>> expires = [nmt+const(0sec)]; >>>> }; >>>> >>>> ObjLifeCycle olcHTML = { >>>> length = logn(7day, 1day); >>>> variance = 33%; >>>> with_lmt = 100%; >>>> expires = [nmt+const(0sec)]; >>>> }; >>>> >>>> ObjLifeCycle olcImage = { >>>> length = logn(30day, 7day); >>>> variance = 50%; >>>> with_lmt = 100%; >>>> expires = [nmt+const(0sec)]; >>>> }; >>>> >>>> ObjLifeCycle olcDownload = { >>>> length = logn(0.5year, 30day); >>>> variance = 33%; >>>> with_lmt = 100%; >>>> expires = [nmt+const(0sec)]; >>>> }; >>>> >>>> ObjLifeCycle olcOther = { >>>> length = unif(1day, 1year); >>>> variance = 50%; >>>> with_lmt = 100%; >>>> expires = [nmt+const(0sec)]; >>>> }; >>>> >>>> Content cntPolyMix_1 = { >>>> kind = "polymix-1"; >>>> mime = { >>>> >>>> mime = { >>>> type = undef(); >>>> extensions = []; >>>> }; >>>> size = exp(13KB); >>>> obj_life_cycle = olcStatic; >>>> cachable = 80%; >>>> }; >>>> >>>> Content cntImage = { >>>> kind = "image"; >>>> mime = { >>>> type = undef(); >>>> extensions = [".gif",".jpeg",".png"]; >>>> }; >>>> obj_life_cycle = olcImage; >>>> size = exp(4.5KB); >>>> cachable = 80%; >>>> checksum = 1%; >>>> }; >>>> >>>> Content cntHTML = { >>>> kind = "HTML"; >>>> mime = { >>>> type = undef(); >>>> extensions = [".html": 60%,".htm"]; >>>> }; >>>> obj_life_cycle = olcHTML; >>>> size = exp(8.5KB); >>>> cachable = 90%; >>>> checksum = 1%; >>>> >>>> may_contain = [cntImage]; >>>> embedded_obj_cnt = zipf(13); >>>> }; >>>> >>>> Content cntDownload = { >>>> kind = "download"; >>>> mime = { >>>> type = undef(); >>>> extensions = [".exe": 40%,".zip",".gz"]; >>>> }; >>>> obj_life_cycle = olcDownload; >>>> size = logn(300KB, 300KB); >>>> cachable = 95%; >>>> checksum = 0.01%; >>>> }; >>>> >>>> Content cntOther = { >>>> kind = "other"; >>>> obj_life_cycle = olcOther; >>>> size = logn(25KB, 10KB); >>>> cachable = 72%; >>>> checksum = 0.1%; >>>> }; >>>> >>>> Server S = { >>>> kind = "PolyMix-4-srv"; >>>> contents = [cntImage: 65%, cntHTML: 15%, cntDownload: >>>> 0.5%, cntOther]; >>>> direct_access = [cntHTML, cntDownload, cntOther]; >>>> xact_think = norm(2.5sec, 1sec); >>>> pconn_use_lmt = zipf(16); >>>> idle_pconn_tout = 15sec; >>>> abort_prob = 0.1%; >>>> addresses = serverAddrs(asPolyMix4, TheBench); >>>> http_versions = ["1.0"]; >>>> }; >>>> >>>> AddrMap Map = { >>>> zone = "bench.tst"; >>>> addresses = S.addresses; >>>> names = ipsToNames(addresses, zone); >>>> }; >>>> >>>> PopModel popModel = { >>>> pop_distr = popUnif(); >>>> hot_set_frac = 1%; >>>> hot_set_prob = 10%; >>>> bhr_discrimination = 90%; >>>> }; >>>> >>>> Resolver.timeout = 5sec; >>>> >>>> float HitIfRepeat = 80%; >>>> >>>> Robot R = { >>>> kind = "PolyMix-4-rbt"; >>>> recurrence = 55%/HitIfRepeat; >>>> embed_recur = 100%; >>>> interests = ["public": 75%,"private"]; >>>> pop_model = popModel; >>>> req_types = ["basic","Ims200": 5%,"Ims304": 10%,"Reload": >>>> 5%]; >>>> req_methods = ["GET","POST": 1.5%,"HEAD": 0.1%]; >>>> abort_prob = 0.1%; >>>> req_rate = TheBench.client_side.max_agent_load; >>>> pconn_use_lmt = zipf(64); >>>> open_conn_lmt = 2; >>>> dns_resolver = Resolver; >>>> origins = Map.names; >>>> addresses = robotAddrs(asPolyMix4, TheBench); >>>> http_versions = ["1.0"]; >>>> }; >>>> >>>> time platDur = 1hour; >>>> >>>> time rampDur = platDur/12; >>>> >>>> int clientHostCount = clientHostCount(TheBench); >>>> >>>> float fillable_ratio = HitIfRepeat; >>>> >>>> rate peak_fill_rate = TheBench.peak_req_rate*0.45*fillable_ratio; >>>> >>>> int wsc = int(peak_fill_rate*platDur); >>>> >>>> working_set_cap(wsc/clientHostCount); >>>> >>>> float smallFactor = 1.0/count(R.addresses); >>>> >>>> Phase phFRamp = { >>>> name = "framp"; >>>> goal.duration = rampDur; >>>> recur_factor_beg = 5%/55%; >>>> special_msg_factor_beg = 0.1; >>>> populus_factor_beg = smallFactor; >>>> populus_factor_end = FillRate/TheBench.peak_req_rate; >>>> }; >>>> >>>> Phase phFill = { >>>> name = "fill"; >>>> goal.fill_size = 2*ProxyCacheSize/clientHostCount; >>>> wait_wss_freeze = yes; >>>> }; >>>> >>>> Phase phFExit = { >>>> name = "fexit"; >>>> goal.duration = rampDur; >>>> recur_factor_end = 1; >>>> special_msg_factor_end = 1; >>>> populus_factor_end = smallFactor; >>>> }; >>>> >>>> Phase phInc1 = { >>>> name = "inc1"; >>>> goal.duration = rampDur; >>>> populus_factor_end = 1; >>>> }; >>>> >>>> Phase phTop1 = { >>>> name = "top1"; >>>> goal.duration = platDur; >>>> }; >>>> >>>> Phase phDec1 = { >>>> name = "dec1"; >>>> goal.duration = rampDur; >>>> populus_factor_end = 0.1; >>>> }; >>>> >>>> Phase phIdle = { >>>> name = "idle"; >>>> goal.duration = rampDur; >>>> }; >>>> >>>> Phase phInc2 = { >>>> name = "inc2"; >>>> goal.duration = rampDur; >>>> populus_factor_end = 1.0; >>>> }; >>>> >>>> Phase phTop2 = { >>>> name = "top2"; >>>> goal.duration = platDur; >>>> }; >>>> >>>> Phase phDec2 = { >>>> name = "dec2"; >>>> goal.duration = rampDur; >>>> populus_factor_end = 0; >>>> synchronize = false; >>>> }; >>>> StatsSample topSample = { >>>> capacity = 10000; >>>> }; >>>> >>>> StatsSample fillSample = { >>>> capacity = int(10%*topSample.capacity); >>>> }; >>>> >>>> phFill.stats_samples = [fillSample]; >>>> >>>> phTop1.stats_samples = [topSample]; >>>> >>>> phTop2.stats_samples = [topSample]; >>>> >>>> schedule(phFRamp, phFill, phFExit, phInc1, phTop1, phDec1, >>>> phIdle, phInc2, phTop2, phDec2); >>>> >>>> use(S, R); >>>> >>>> use(Map); >>>> >>>> use(TheBench); >>>> >>>> 2 - Running dns_config >>>> ./dns_config --config workload.pg >>>> >>>> 3 - Put the configuration in your dns >>>> >>>> 4 - running polysrv >>>> After running this app. if you running ifconfig you see various ip in >>>> lo interface. >>>> >>>> ./polysrv --config /usr/local/polygraph/workloads/workload.pg --log >>>> /var/logs/server.log >>>> >>>> 5 - running polyclt >>>> >>>> ./polyclt --config /usr/local/polygraph/workloads/marcos.pg --proxy >>>> 192.168.0.1:3128 --log /var/logs/client.log >>>> >>>> 6 - running reporter >>>> You may be stop process server and client of polygraph to make a report. >>>> /usr/local/polygraph/bin/reporter --report_dir /var/www/html/proxy >>>> --label "Proxy ACL" /var/logs/*.log >>>> >>>> When you running polygraph you should look mgr info of squid and >>>> analyzing the connections of your squid server. >>>> >>>> I hope this informations help you. >>>> >>>> Regards, >>>> Marcos >>>> >>>> >>>> >>>> >>>> >>>> >>>> >>>> >>>> >>>> 2008/8/12 Stephen Ryan <stephen.ryan@xxxxxxxxxxxx>: >>>>> t.dadashi@xxxxxxxxx wrote: >>>>>> >>>>>> thanks for your reply, >>>>>> i have a very restricted time, >>>>>> befor i tried to use web polygraph but the >>>>>> commands in the site's document were unknown for >>>>>> the shell, >>>>>> and i really dont know what to do, >>>>>> then i tried webstone : >>>>>> http://www.mindcraft.com/webstone/faq.html >>>>>> (about 11 pages manual against 200 for polygraph!) >>>>>> i think this one is easier but there are some problems >>>>>> in setting it up again! >>>>>> can you please help me on this??? >>>>>> >>>>>> >>>>> >>>>> Something as simple as apache_benchmark? You could have some fancy grep >>>>> and >>>>> awk around it to examine the results, and a shell script around the >>>>> whole >>>>> thing to run it for you. >>>>> >>>> >>> >>> >>> -- >>> T.Dadashi >>> >> > > > -- > T.Dadashi >
