Gordon McKee wrote:
Hi
Is there any debug info I can get to try and get to the bottom of this
one - or am I going to have to try installing the i386 version of
FreeBSD7 to see if that fixes it?
Since you have a reliable test you could run a short experiment adding
"debug_options ALL,8" to squid.conf, requesting the failing URI and
trolling the cache.log for any further information about the request.
Amos
Many thanks
Gordon
----- Original Message ----- From: "Gordon McKee" <squidmlist@xxxxxxxxxxx>
To: "Gordon McKee" <squidmlist@xxxxxxxxxxx>; "Henrik Nordstrom"
<henrik@xxxxxxxxxxxxxxxxxxx>
Cc: "Amos Jeffries" <squid3@xxxxxxxxxxxxx>; <squid-users@xxxxxxxxxxxxxxx>
Sent: Tuesday, May 06, 2008 9:47 AM
Subject: Re: Very Slow Reverse Proxy
Hi
Does anyone have any ideas on how to get a fix for this one? Is it a
bsd issues or a squid issue?
Many thanks
Gordon
----- Original Message ----- From: "Gordon McKee"
<squidmlist@xxxxxxxxxxx>
To: "Henrik Nordstrom" <henrik@xxxxxxxxxxxxxxxxxxx>
Cc: "Amos Jeffries" <squid3@xxxxxxxxxxxxx>; <squid-users@xxxxxxxxxxxxxxx>
Sent: Sunday, May 04, 2008 10:39 PM
Subject: Re: Very Slow Reverse Proxy
Hi
The box is only used from a shell prompt(no GUI installed), but I
installed lynx and the sites work fine.
Kind regards
Gordon
----- Original Message ----- From: "Henrik Nordstrom"
<henrik@xxxxxxxxxxxxxxxxxxx>
To: "Gordon McKee" <squidmlist@xxxxxxxxxxx>
Cc: "Amos Jeffries" <squid3@xxxxxxxxxxxxx>;
<squid-users@xxxxxxxxxxxxxxx>
Sent: Sunday, May 04, 2008 8:40 PM
Subject: Re: Very Slow Reverse Proxy
On sön, 2008-05-04 at 14:51 +0100, Gordon McKee wrote:
One last point, the sites work fine internally, but not externally
and I
also have another domain setup and forwarding to a different
internal IP and
it does the same. The odd bit about it all is the site will come
eventually - if you have enough patience. As far as I can see
there are no
errors in the log files on either server
Can you reach the sites fine if running a browser on the Squid server
but without using Squid?
Regards
Henrik
--
Please use Squid 2.6.STABLE20 or 3.0.STABLE5
