On 12/17/07, Amos Jeffries <squid3@xxxxxxxxxxxxx> wrote: > > Dear All, > > I have two ISPs and I'd to redirect to parent based on URL. See my > > situation below. > > > > / ISPA (eth0) e.g. 1.1.1.1 (same > > proxies of ISPA) (ADSL 512 Kbps) > > LAN eth3--->LinuxBox--|-- ISPA (eth1) e.g. 1.2.1.1 (same proxies of > > ISPA) (ADSL 256 Kbps) > > \ ISPB (eth2) e.g. 1.3.1.1 > > (ADSL 512 Kbps but not stable) > > My cache configuration is as show below > > cache_peer ISPA_Proxy1 parent 8080 3130 no-query > > cache_peer ISPA_Proxy2 parent 8080 3130 no-query > > cache_peer ISPA_Proxy3 parent 8080 3130 no-query > > cache_peer ISPA_Proxy3 parent 8080 3130 no-query > > > > cache_peer ISPB_Proxy1 parent 8080 3130 no-query > > cache_peer ISPB_Proxy1 parent 8080 3130 no-query > > > > Here is what I want to do. > > 1. I want to balance load evenly to both ADSL connection to ISPA. > > They have same proxy parents. > > If it is not possible to balance evenly, I'd to set 512 Kbps > > connection as default and when it fill load, then redirect to 256 Kbps > > ADSL > > Depends on how your squid was built. You fail to say which version and > release you are talking about. > Look up the cache_peer options, several of them are for load balancing. > You want one of the weighted algorithms, probably carp. > > http:/www.squid-cache.org/Versions/v2/2.6/cache_peer.html > > > 2. Some sites are banned by ISPA but ISPB allow. And also some sites > > banned by ISPB is allow by ISPA. > > This is the reason why I use two ISP > > So, I want to redirect banned site of ISPA to ISPB. For e.g. > > Metacafe is banned by ISPB and I want to redirecto ISPA > > cache_peer_access > > http:/www.squid-cache.org/Versions/v2/2.6/cache_peer_access.html > > I'm assuming you are one of the multitude on squid2.6 since you don't say. > > > > > Any suggestion is highly appricated.....? > > > > Mr. Crack007 > > > > Amos > > > I am using RedHat Enterprise Linux Version 3 and below is my squid version and compiled info ============> root# squid -v Squid Cache: Version 2.5.STABLE3 configure options: --host=i386-redhat-linux --build=i386-redhat-linux --target=i386-redhat-linux-gnu --program-prefix= --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib --libexecdir=/usr/libexec --localstatedir=/var --sharedstatedir=/usr/com --mandir=/usr/share/man --infodir=/usr/share/info --exec_prefix=/usr --bindir=/usr/sbin --libexecdir=/usr/lib/squid --localstatedir=/var --sysconfdir=/etc/squid --enable-poll --enable-snmp --enable-removal-policies=heap,lru --enable-storeio=aufs,coss,diskd,null,ufs --enable-ssl --with-openssl=/usr/kerberos --enable-delay-pools --enable-linux-netfilter --with-pthreads --enable-basic-auth-helpers=LDAP,NCSA,PAM,SMB,SASL,MSNT,winbind --enable-ntlm-auth-helpers=SMB,winbind,fakeauth --enable-external-acl-helpers=ip_user,ldap_group,unix_group,wbinfo_group,winbind_group --enable-auth=basic,ntlm --enable-useragent-log --enable-referer-log ==================> I will also take a look at CARP Mr. Crack007
