Yes Martin, it is just like yours. FYI, the Squid & Cisco was running with WCCPv1 very well. After getting problem with hotmail.com, I want to upgrade to WCCPv2 that I heard it will solve the problem Thx & Rgds, Awie ----- Original Message ----- From: "Martin Kobele" <martin.kobele@xxxxxxxxxxxxxx> To: "Awie" <awie@xxxxxxxxxxx> Cc: <squid-users@xxxxxxxxxxxxxxx> Sent: Friday, March 16, 2007 19:22 Subject: Re: WCCP Module for WCCP Version 2 > Hi Awie, > > how did you configure your outgoing interface on the cisco? > > There should be something like this: > > interface FastEthernet0/0 > ip address 192.168.3.21 255.255.255.0 > no ip directed-broadcast > ip wccp web-cache redirect out > no ip mroute-cache > > Regards, > Martin > > > On Friday 16 March 2007 05:14:17 Awie wrote: > > Martin, > > > > Below are the report from Cisco router. > > > > Global WCCP information: > > Router information: > > Router Identifier: my.router.ip.addr > > Protocol Version: 2.0 > > > > Service Identifier: web-cache > > Number of Cache Engines: 1 > > Number of routers: 1 > > Total Packets Redirected: 0 > > Redirect access-list: squid-wccp > > Total Packets Denied Redirect: 702 > > Total Packets Unassigned: 0 > > Group access-list: squid-cache > > Total Messages Denied to Group: 0 > > Total Authentication failures: 0 > > > > WCCP Cache-Engine information: > > Web Cache ID: my.squid.ip.addr > > Protocol Version: 2.0 > > State: Usable > > Initial Hash Info: 00000000000000000000000000000000 > > 00000000000000000000000000000000 > > Assigned Hash Info: FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF > > FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF > > Hash Allotment: 256 (100.00%) > > Packets Redirected: 0 > > Connect Time: 00:02:39 > > > > > > From information above, the Router has WCCP link to Squid box, am I right? > > > > Thx & Rgds, > > > > Awie > > > > > > ----- Original Message ----- > > From: "Awie" <awie@xxxxxxxxxxx> > > To: "Martin Köbele" <martin.kobele@xxxxxxxxxxxxxx> > > Cc: "Henrik Nordstrom" <henrik@xxxxxxxxxxxxxxxxxxx>; > > <squid-users@xxxxxxxxxxxxxxx> > > Sent: Friday, March 16, 2007 13:58 > > Subject: Re: WCCP Module for WCCP Version 2 > > > > > > Have you turned on full blown debug logging to see what is happening or > > > > > > not > > > > > > > happening? > > > > > > Yes, the Linux has already modprobe ip_wccp as it was running WCCPv1. > > > > > > I captured the traffic to Squid box by using ethereal and I saw WCCP 2.0 > > > "Here I am & I see you". If the WCCP connection is establish, why is it > > > unable redirect? > > > > > > Please advise. > > > > > > Thx & Rgds, > > > > > > Awie > > > > > > > On Friday 16 March 2007 00:03:42 Awie wrote: > > > > > > Thank you very much, Henrik! > > > > > > > > > > > > Awie, how is it going for you? > > > > > > > > > > > > Regards, > > > > > > Martin > > > > > > > > > > Martin & Henrik, > > > > > > > > > > Thanks a lot for discussion but I become more confuse to choose > > > > ip_wccp > > > > > or > > > > > > > > ip_gre. From this topic I assume that ip_wccp still able to serve > > > > > > WCCPv2. > > > > > > > > Now I try ip_wccp (version 1.7) that resulting no packet be > > > > > redirected > > > > > > to > > > > > > > > Squid box. > > > > > > > > > > As my kernel is 2.4.34 (currently, I have no plan to use 2.6.x yet), > > > > > I > > > > > > need > > > > > > > > your advise the better module I should use. > > > > > > > > > > Thx & Rgds, > > > > > > > > > > Awie > > > > > > > > > > > On Thursday 15 March 2007 10:54, Henrik Nordstrom wrote: > > > > > > > tor 2007-03-15 klockan 09:55 -0400 skrev Martin Kobele: > > > > > > > > So in 2.4.32, the GRE implementation does not support WCCP. > > > > > > > > Ok, rebooted the box, ip_gre is built into the kernel, loading > > > > > > > > ip_wccp and I don't set up the GRE tunnel. > > > > > > > > > > > > > > > > Why/How does that work? It doesn't need the GRE tunnel. > > > > > > > > Would it use the GRE tunnel if it was there? > > > > > > > > > > > > > > When you load ip_wccp it probably takes over as GRE protocol > > > > > > handler, > > > > > > > > > > effectively disabling ip_gre. > > > > > > > > > > > > > > Regards > > > > > > > Henrik > > > > > > > > > > > > -- > > > > > > Martin Kobele > > > > > > Software Developer > > > > > > t. 519-826-5222 ext #224 > > > > > > f. 519-826-5228 > > > > > > martin.kobele@xxxxxxxxxxxxxx > > > > > > Netsweeper Corporate Head Office > > > > > > 104 Dawson Road > > > > > > Guelph, Ontario > > > > > > N1H 1A7 > > > > > > > > -- > > > > Martin Kobele > > > > Developer > > > > t. 519-826-5222 ext #224 > > > > f. 519-826-5228 > > > > martin.kobele@xxxxxxxxxxxxxx > > > > Netsweeper Corporate Head Office > > > > 104 Dawson Road > > > > Guelph, Ontario > > > > N1H 1A7 > > > > -- > Martin Kobele > Developer > t. 519-826-5222 ext #224 > f. 519-826-5228 > martin.kobele@xxxxxxxxxxxxxx > Netsweeper Corporate Head Office > 104 Dawson Road > Guelph, Ontario > N1H 1A7 >
