Martin, Below are the report from Cisco router. Global WCCP information: Router information: Router Identifier: my.router.ip.addr Protocol Version: 2.0 Service Identifier: web-cache Number of Cache Engines: 1 Number of routers: 1 Total Packets Redirected: 0 Redirect access-list: squid-wccp Total Packets Denied Redirect: 702 Total Packets Unassigned: 0 Group access-list: squid-cache Total Messages Denied to Group: 0 Total Authentication failures: 0 WCCP Cache-Engine information: Web Cache ID: my.squid.ip.addr Protocol Version: 2.0 State: Usable Initial Hash Info: 00000000000000000000000000000000 00000000000000000000000000000000 Assigned Hash Info: FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF Hash Allotment: 256 (100.00%) Packets Redirected: 0 Connect Time: 00:02:39 >From information above, the Router has WCCP link to Squid box, am I right? Thx & Rgds, Awie ----- Original Message ----- From: "Awie" <awie@xxxxxxxxxxx> To: "Martin Köbele" <martin.kobele@xxxxxxxxxxxxxx> Cc: "Henrik Nordstrom" <henrik@xxxxxxxxxxxxxxxxxxx>; <squid-users@xxxxxxxxxxxxxxx> Sent: Friday, March 16, 2007 13:58 Subject: Re: WCCP Module for WCCP Version 2 > > Have you turned on full blown debug logging to see what is happening or > not > > happening? > > Yes, the Linux has already modprobe ip_wccp as it was running WCCPv1. > > I captured the traffic to Squid box by using ethereal and I saw WCCP 2.0 > "Here I am & I see you". If the WCCP connection is establish, why is it > unable redirect? > > Please advise. > > Thx & Rgds, > > Awie > > > > On Friday 16 March 2007 00:03:42 Awie wrote: > > > > Thank you very much, Henrik! > > > > > > > > Awie, how is it going for you? > > > > > > > > Regards, > > > > Martin > > > > > > Martin & Henrik, > > > > > > Thanks a lot for discussion but I become more confuse to choose ip_wccp > or > > > ip_gre. From this topic I assume that ip_wccp still able to serve > WCCPv2. > > > Now I try ip_wccp (version 1.7) that resulting no packet be redirected > to > > > Squid box. > > > > > > As my kernel is 2.4.34 (currently, I have no plan to use 2.6.x yet), I > need > > > your advise the better module I should use. > > > > > > Thx & Rgds, > > > > > > Awie > > > > > > > On Thursday 15 March 2007 10:54, Henrik Nordstrom wrote: > > > > > tor 2007-03-15 klockan 09:55 -0400 skrev Martin Kobele: > > > > > > So in 2.4.32, the GRE implementation does not support WCCP. > > > > > > Ok, rebooted the box, ip_gre is built into the kernel, loading > > > > > > ip_wccp and I don't set up the GRE tunnel. > > > > > > > > > > > > Why/How does that work? It doesn't need the GRE tunnel. > > > > > > Would it use the GRE tunnel if it was there? > > > > > > > > > > When you load ip_wccp it probably takes over as GRE protocol > handler, > > > > > effectively disabling ip_gre. > > > > > > > > > > Regards > > > > > Henrik > > > > > > > > -- > > > > Martin Kobele > > > > Software Developer > > > > t. 519-826-5222 ext #224 > > > > f. 519-826-5228 > > > > martin.kobele@xxxxxxxxxxxxxx > > > > Netsweeper Corporate Head Office > > > > 104 Dawson Road > > > > Guelph, Ontario > > > > N1H 1A7 > > > > > > > > -- > > Martin Kobele > > Developer > > t. 519-826-5222 ext #224 > > f. 519-826-5228 > > martin.kobele@xxxxxxxxxxxxxx > > Netsweeper Corporate Head Office > > 104 Dawson Road > > Guelph, Ontario > > N1H 1A7 > > > >