Hi, yes, we use wccp 1.7 as well. Do you have your GRE tunnel set up? If you enable the debug log on cisco and/or squid, do you see the handshakes (I_SEE_YOU, and HERE_I_AM) at all? Your squid.conf is fine. You use the standard wccp2_service which works with the web-cache service on the cisco router. I tested it with that, now I am running it with the service id 97. But that shouldn't matter. Regards, Martin On Tuesday 13 March 2007 14:09, Awie wrote: > Hi Martin, > > > what squid version are you using and how does the wccp configuration in > > squid.conf look like? > > I'm using Suid 2.6S10. Here is the squid.conf (for WCCP section) > > wccp2_router W.X.Y.Z > > # TAG: wccp_version > #Default: > wccp_version 4 > > # TAG: wccp2_rebuild_wait > #Default: > # wccp2_rebuild_wait on > > # TAG: wccp2_forwarding_method > #Default: > wccp2_forwarding_method 1 > > # TAG: wccp2_return_method > #Default: > wccp2_return_method 1 > > # TAG: wccp2_assignment_method > #Default: > # wccp2_assignment_method 1 > > # TAG: wccp2_service > #Default: > wccp2_service standard 0 > > # TAG: wccp2_service_info > #Default: > # none > > # TAG: wccp2_weight > #Default: > # wccp2_weight 10000 > > # TAG: wccp_address > # TAG: wccp2_address > #Default: > # wccp_address 0.0.0.0 > # wccp2_address 0.0.0.0 > > > I am using wccp2 with a 2.4.33 kernel, squid 2.6 and cisco router. > > What version of ip_wccp module do you use? Do you compile it manually? > > Please advise. > > Thanks, > > Awie -- Martin Kobele Software Developer t. 519-826-5222 ext #224 f. 519-826-5228 martin.kobele@xxxxxxxxxxxxxx Netsweeper Corporate Head Office 104 Dawson Road Guelph, Ontario N1H 1A7
