Hi, what squid version are you using and how does the wccp configuration in squid.conf look like? I am using wccp2 with a 2.4.33 kernel, squid 2.6 and cisco router. Regards, Martin On Tuesday 13 March 2007 10:11, Awie wrote: > All, > > Our WCCP version 1 was running for 2 years then getting problem with > hotmail.com authentication. Someone suggest me to use WCCPv2 to solve the > issue. > > I tried to run WCCPv2 on linux 2.4.32 with wccp modules version 1.7. After > configuring Squid and Cisco router (more or less was same as WCCPv1), I saw > that Squid can talk to Cisco. But there are no packet were redirected. > > AFAIK, wccp module (v 1.7) support WCCPv2, but I am curios why the packet > redirection was not happen. Currently, I don't have plan to use linux > 2.6.x. > > Hope you would suggest me how to solve such problem with using linux 2.4.x. > > Your help is very appreciated and waited for. > > Thank you so much and best regards, > > Awie > > ===SNIP=== > > > > Global WCCP information: > Router information: > Router Identifier: W.X.Y.Z > Protocol Version: 2.0 > > Service Identifier: web-cache > Number of Cache Engines: 1 > Number of routers: 1 > Total Packets Redirected: 0 > Redirect access-list: squid-wccp > Total Packets Denied Redirect: 7346 > Total Packets Unassigned: 0 > Group access-list: squid-cache > Total Messages Denied to Group: 0 > Total Authentication failures: 0 -- Martin Kobele Software Developer t. 519-826-5222 ext #224 f. 519-826-5228 martin.kobele@xxxxxxxxxxxxxx Netsweeper Corporate Head Office 104 Dawson Road Guelph, Ontario N1H 1A7
