See the http_port option. Assuming you left your config in the default
"full of comments" state, then this is clearly explained there.
Otherwise, check the docs for it's usage.
As an example would be, you need something like below.
#======start
http_port 192.168.1.3:3128
http_port 192.168.100.3:3128
#======end
Tim
Stefano Del Furia wrote:
Hi, i have a Windows Server with Squid 2.5.
In this server i have 3 Network adapter.
The first is linked to the ADSL router with a public IP.
The second is on the net 192.168.100.x/255.255.255.0 with the ip
192.168.100.3
The third is on the net 192.168.1.x/255.255.255.0with the ip 192.168.1.3
Is there a way of bind Squid service to the 2nd and 3rd network
adapter ???
Thanks in advance
**********************************************************************
This message is intended for the addressee named and may contain
privileged information or confidential information or both. If you
are not the intended recipient please delete it and notify the sender.
**********************************************************************
