Search squid archive

Re: wccpv2 gre problems

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Here is my current situation, I remove the ip_gre module, and now I'm just using the ip_wccp.o module cache redirection seems to working on the Cisco side but I'm getting an invalid request page request on page views through wget or through a web browser

Connecting to www.aol.com[64.12.128.2]:80... connected.
HTTP request sent, awaiting response... 400 Bad Request
18:33:08 ERROR 400: Bad Request.

It looks like wccp is dropping the host portion and not sending it back to Squid

is this a bug ?





On May 24, 2006, at 3:37 PM, Henrik Nordstrom wrote:

ons 2006-05-24 klockan 15:07 -0400 skrev Rodrick Brown:
 From tcpdump I get the following messages over and over

02:53:39.149749 192.168.100.1 > 192.168.100.3: icmp: 192.168.100.1
udp port 2048 unreachable [tos 0xc0]
02:55:36.069728 192.168.100.1 > 192.168.100.3: icmp: 192.168.100.1
udp port 2048 unreachable [tos 0xc0]

Your router says it doesnt run WCCP.

# lsmod |egrep '(wccp|gre)'
ip_wccp                 1980   0  (unused)
ip_gre                 11744   1

You should never load both, they are mutually exclusive.

Regards
Henrik

-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.3 (Darwin)

iD8DBQFEdN+33+M9NSOvVdURAt1qAJ0R0CigjEOcpvHYA4DBdARW5bzJ8gCeNicQ
gs+HfzjMmVvqaM/gbuP8urk=
=j7wB
-----END PGP SIGNATURE-----

[Index of Archives]     [Linux Audio Users]     [Samba]     [Big List of Linux Books]     [Linux USB]     [Yosemite News]

  Powered by Linux