Search squid archive

Re: squid wccp problem - packets not redirecting to squid

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




--- Henrik Nordstrom <hno@xxxxxxxxxxxxxxx> wrote:

> On Fri, 9 Sep 2005, ksc wrote:
> 
> > The problem is that the cisco router shows that
> the
> > cisco has registered the server as cache-engine,
> and
> > the port 80 traffic is passing through to my gre1.
> > However, it doesn't get passed on to my squid
> (running
> > at port 8080). I've already setup my iptables rule
> and
> > there's no firewall blocking.
> 
> If browsing still works then your iptables ruleset
> is wrong and does not 
> match the traffic.
> 
> If browsing is dead then maybe you have the
> rp_filter sysctl enabled.. 
> this will cause the packets to go into the bitbucket
> immediately when 
> exiting the gre tunnel..
> 

/proc/sys/net/ipv4/conf/default/rp_filter is 0

> > iptables -A PREROUTING -p tcp -i eth1 --dport 80
> -j
> > REDIRECT --to-port 8080
> > (my interface is eth1)
> 
> This does not look correct to me. The interface
> should be the gre 
> interface as this is where the client port 80
> traffic is seen...
> 

I tried '-i gre1' as well, doesn't help... 

thanks,
ksc

> Regards
> Henrik
> 


__________________________________________________
Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around 
http://mail.yahoo.com 

[Index of Archives]     [Linux Audio Users]     [Samba]     [Big List of Linux Books]     [Linux USB]     [Yosemite News]

  Powered by Linux