Search squid archive

Re: [squid-users] tune up

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Wennie V. Lagmay wrote:

Thank you very much Askar,

Now it's the only the option --with-aufs-threads=1024 is not clear, what is this option and is 1024 value is ok, anybody can you please enlighten me?
wennie
hi wennie,
I thinks you dont need to do anything fancy for aufs, as i read in http://www.oreilly.com/catalog/squid/chapter/ch08.pdf
according to the author squid will autmatically starts thread depends on 
number of cache_dir.
Table 8-1. Default number of threads for up to six cache directories
cache_dirs Threads
1 16
2 26
3 32

However for my 2 cache_dir  I have ...
$ps -ef | grep squid | wc -l
31

of squid processes.

regards


----- Original Message ----- From: "Askar" <askar@xxxxxxxxxxxxx>
To: <squid-users@xxxxxxxxxxxxxxx>
Sent: Monday, May 30, 2005 3:39 PM
Subject: Re: [squid-users] tune up


Wennie V. Lagmay wrote:

Ok if im going to recompile it again, i just start squid and it should be working again right?

yes

second if i recompile it --enable-storeio="aufs" do I need to enable --with-aufs-threads=1024 and is a 1024 value is ok?

I don't have defined -with-aufs-threads=1024 options while compiling squid and its working just cool
during recompilation, can I let squid running? aftrer I recompile it 
I sould only issue a command squid -z and suid start am I right?

yep let squid serving clients, don't issue squid -z command no need to do so. Before giving "make install" command for safty cp your squid.conf file to another location if you want to reuse the same squid.conf and then issue "make install" and place the squid.conf in /usr/local/squid/etc, and change the cache_dir line only replace diskd with aufs.
then shutdown the squid and restart it.

what is the posiblity that my squid will not start?

I'm sure it will start with no problem ;)

Thanks,

Wennie




I'm affraid you have to recompile squid if you didnt enable aufs eariler, you can check squid compilation option with "squid -v" , see if there "--enable-storeio=aufs,coss,diskd,ufs" Again if you don't see aufs support then don't hestitate to recompile squid.
regards

askar











[Index of Archives]     [Linux Audio Users]     [Samba]     [Big List of Linux Books]     [Linux USB]     [Yosemite News]

  Powered by Linux