Thank you very much Askar,
Now it's the only the option --with-aufs-threads=1024 is not clear, what is
this option and is 1024 value is ok, anybody can you please enlighten me?
wennie
----- Original Message -----
From: "Askar" <askar@xxxxxxxxxxxxx>
To: <squid-users@xxxxxxxxxxxxxxx>
Sent: Monday, May 30, 2005 3:39 PM
Subject: Re: [squid-users] tune up
Wennie V. Lagmay wrote:
Ok if im going to recompile it again, i just start squid and it should be
working again right?
yes
second if i recompile it --enable-storeio="aufs" do I need to
enable --with-aufs-threads=1024 and is a 1024 value is ok?
I don't have defined -with-aufs-threads=1024 options while compiling squid
and its working just cool
during recompilation, can I let squid running? aftrer I recompile it I
sould only issue a command squid -z and suid start am I right?
yep let squid serving clients, don't issue squid -z command no need to do
so. Before giving "make install" command for safty cp your squid.conf file
to another location if you want to reuse the same squid.conf and then
issue "make install" and place the squid.conf in /usr/local/squid/etc, and
change the cache_dir line only replace diskd with aufs.
then shutdown the squid and restart it.
what is the posiblity that my squid will not start?
I'm sure it will start with no problem ;)
Thanks,
Wennie
I'm affraid you have to recompile squid if you didnt enable aufs
eariler, you can check squid compilation option with "squid -v" , see if
there "--enable-storeio=aufs,coss,diskd,ufs"
Again if you don't see aufs support then don't hestitate to recompile
squid.
regards
askar
